Keep going. Flowering is continuing.

All is good so far, the seeds of all the different strains have been quite vigorous. Lost my first sour diesel due to my impatience, but the second time around was a charm .

1/23 - Beginning of week 11 for Crystal Candy. Will start to give plain water only starting tomorrow 1/25 - Still week 10 for the Fog Dog but the leaves have started to get a nice little fade to them. Buds are getting plump and dense. I have a few weeks left before I chop so there’s plenty more time to fatten up 1/27 - Week 11 for Fog Dog finally began and the buds on both are looking nice and frosty and smelling up the tent 1/30 - Noticed some spider mites on the fog dog a few days ago. I trimmed the top of the infested buds and cleaned the mites and webs off several times a day and raised the humidity back up. They seem to be gone for now so I will probably finish out this grow with a slightly higher humidity than normal. I have heavy airflow so it shouldn’t be an issue.

Had some slight problems with the seed shells not popping off of the Cheese and Hulkberry seedlings. The fat banana looks good so far, some slight yellow coloring on outer edges of the fan leaves. Any suggestions from the pix above would be helpful to identify what kind of trauma the plants are going through and how to address it. ***** Regarding all pictures from 6/17/19, any help would be truly appreciated!!

Well Cannafam weve come to the end(not of us i still love you 💚) Firstly i would just like to say a massive thanks to Divine Seeds for letting me take part 😊 I gave her the chop yesterday slightly earlier than planned as the nute burn had started getting near the buds and i didnt want to compromise bud quality. The trichomes on the upper half of the plant are mostly cloudy with a few amber and some beautiful pink ones also, however pics shown are mainly from the lower buds due to slight issues trying to keep buds still while aligning the phone/magnifier 😊 This gal grew like an absolute beast throughout the cycle and i would say is the most rapid ive grown! She was absolutley honking in the end and i can't wait to sample her sweet buds. Overall this grow has been immensly enjoyable and il deffo be growing again at some point. Ive not done wet weight as yet as i didnt want to chop her monster buds up, but once dry il trim further and give the final weight with smoke report and further photos. Thank you to everyone who has commented/liked and i hope you've enjoyed this diary 😊 Peace and Love Friends ✌️💚💚💚 ********** Update************* Hey Cannafam, Well ive tried this gal after curing in my vape and very happy. After drying there was a fair bit of shrinkage but the smoke is lovely. As soon as you take a bit she stops all thoughts in the mind immediately followed by complete muscle release and i would say moderate pain relief. A medium strength Erb good for the evening and i just chilled out watchin southpark and fell asleep shortly after for a really good nights sleep which is perfect for me, i will definitely grow this gal again 😊✌️

Wanted to keep her growing until the end of the month but, mother nature had other plans. Woke up this morning and the buds where almost touching the ground. Still have 1/2 the plant left, will cut fown later today if more rain. Don’t have room to cure all at one time. Normally I cure outside, for now they’re in my bathroom and dressing room.😬Don’t know the wet weight for now since only cut 1/2 of the plant, but probably a good 4 or more kilos!😳 Finally, the sun has returned. Not hot though, but nice and sunny. Moved curing to outside for now. Last night we stayed high just from the aroma in the house. More to come when she dries.😍 Last plant totalled 2,005grams. 3 plant total 3,340 grams 😎

27/05 - Day 1 of Veg(1L of Nutrients dissolved in water poured into the tray) 1/06 - Day 6 added toothpick to help give support 2/06 - Day 7 checked on their root development, so I can transplant (Tomorrow we transplant)

Last time I smoke widow was way back in the 90s

Explosive growth again all round,.. all are flowering now and looking healthy, not going to be like last year's 7ft plants but that's on purpose, roll on next week and hope the sun stays out like it has been because they are loving it at the moment 😀 👍👌

Chopped her down after 2 days of darkness before a slow dry for 1-2 weeks Keeping humidity at 58-63 and temperature in mid to low 60s.

WEEDSEEDSEXPRESS has awesome genetics... This girl is taking a beating and she's handling it well.. hope everyone is doing well and happy growing ✌️

Buds are coming along nicely, they started off with a not so appealing smell but eventually started to smell very sweet. Increased dosage for increased blooming and ripening. Missed update for day 49 but vids from previous day makes up for it. Side note, I created a homemade Co2 bag with ingredients that is easily available and affordable. I don't think I let is have an effect on my buds but it sure did smell awful. After the 5th day, I got rid of it.

7.week

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The girls are growing and doing well 👍 Day 12 they no longer grow to the top, but their stems are still quite thin The nutrition was adjusted to the minimum dose specified by the manufacturer, each received 0.6 l rinsed with 2 l of treated water, flooded with 0.6 l of nutrient solution

Day 73, took another batch if clones three days after taking the 2nd batch so now I have 80 clones that will root in 11 to 14 days. The sun is hot again back to +30C° day temps, I was to lazy to take individual photos of my mother plants. I'll give the plants 10 days to recover from the stress from taking cuttings. Day 75, last day in the tent for my mother plants, tonight there going inside boxes for 3 day of darkness so that the plants forget the 18 hrs veg lighting to follow the sun. 2nd batch of clones to veg for a week before going outside to flower. Mothers in boxes they will come out on the 24th September