The Grow Awards 2026 🏆
Likes
Comments
Share
Nothing to update on, still just watering when needed. Starting to think about flushing process for a few of the plants soon, As they seem to be maybe a week or so ahead of the rest. Defoliating a little just where where have leaves blocking bud sights.
Likes
13
Share
@Oyziphar
Follow
Last week before flowering 😊😄😝 The plants did an excellent job last week. The repotting to the large pots has done them well. 👍 I have watered the plants 3 times now. First two times 5 liters of water, containing 1 tablet of RQS Easy Grow Booster. The third time 1.5 tablet for 5 liters of water. Mind ! It takes a while before the tablets are dissolved! 😹 The color of the new leaves is beautifully green. The VPD is now also perfect most of the time with a value of 1.0 👌 For that I had to increase the relative humidity to almost 70%. 😭 I attached the plants that are somewhat larger, to the plant sticks, with a plastic binding strip. In this way I pull the plants to the same height as the smaller plants. This gives me a nice match canopy. The lower side branches of the large plants will now develop more, but I will remove them later. 👽 The plants now get 18 hours of light, so that the shock is a little less when they go to 12/12. 🙏
Likes
Comments
Share
Likes
39
Share
@KitaKush
Follow
A white christmas for me after all! 😂 Week 13 harvest! Plant 1 = 67 grams/2.3 oz Plant 2= 55 grams/1.9 oz overall= 4.2 oz (5-7 day dry) The Gorilla Cookies are soooo damn frosty and stinky…i’ll be drooling at them for a month until I can taste them!!!! Photos mostly of plant 2..1 was coated in resin but plant 2..the frostiness can be seen from far away! My first top shelf grow 😈…hopefully more to come! My glove was literally sticking to the stems and getting stuck with plant #2 The stench reminds me of thanksgiving dinner LOL..sausage stuffing and gas is what comes to mind..very savory aroma! One plant flushed partially the other not flushed and I can tell you that the flushed plant has much more flavorrrr..if this didn’t prove to me that flushing is absolutely essential IDK what would! LOL
Likes
11
Share
Likes
62
Share
Day 50 Both plants received their first feeding of Future Harvest Holland Secret 3 part combo and in less than 12 hours have perked up and look very energetic! If all goes well I will hopefully flipping to bloom in week 9 or 10
Likes
31
Share
Thanks for stopping by had a bit of a hiccup last weekend left them unattended got a little heat stress but got everything back on track and now we’re pre flowering also switched nutrients and readjusted pots for better lighting. ( I’m excited for my first grow ever )
Likes
32
Share
🍼Greenhouse Feeding BioGrow & BioBloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000) 🌱 DUTCH HEADSHOP SEEDS: www.dutch-headshop.eu www.dutch-headshop.nl ONE STOP SHOP . 100% germination success on first try! with HUGE seed selection! . Very friendly customer service . Best bio-seed packaging . Sells other products @ best prices: . Nutrients . Vaporizers . Smoking accessories (grinders, cones) . CBD Tinctures . Resin Extracts . Boveda humidity packs . Ziplock bags . Other health supplements such as: . Lion’s Mane Organic Capsules . Hemp Seed coffee
Likes
9
Share
@420keef
Follow
Just got my new lamp, happy to show the love my plants been getting :)
Likes
105
Share
@BioBuds
Follow
This is the final week, they are going to be chopped coming week. Already had some darkness and they are very very smelly. I am amazed at this strain's resilience. It had to deal with my noobishness with autos, heat, very hot soil and less PH buffering with my own super soil recipe (see the yellow image in the germination page) in the smaller bags. Still, they became huge and full of bud. Forbidden Runtz is an amazing strain. Very strong growth but also with most auto's I've grown: once the grow derails, it seldom recovers. But these do. I'm sure next grows I'm going to get even more out of them. Can't wait to try them again with what I've learned now. And you should all consider the SP-3000 as a growlight, look at my results! I will update when I've harvested, thanks for visiting!! Don't forget to check out the special spring discounts on www.mars-hydro.com Big hug Bud
Likes
25
Share
Day 58 30/08/24 Friday Feed today using de-chlorinated tap water pH 6 with Plagron products. Day 60 01/09/24 Sunday De-chlorinated tap water pH 6 with calmag today. Picture update ✌️💚 Day 62 03/09/24 Tuesday
Likes
36
Share
Last week was pretty stable. The buds are steadily fattening up, just how we like it. They all got burned leave tips, I think it has to do with too little runoff, because I’m using GHE’s flora hydro schedule on exactly half strength. Its not getting worse over the last days so its probably not a big deal. Like I said last week, I have a dehumidifier now. I got it hooked up to one of the air holes on the bottom. My sonoff temperature and humidity sensor checks when it goes over 65% rh, and fires on the dehumidifier whenever needed to blow difrectly in the tent. I do wonder if I could save on electricity to get a stronger exhaust fan. Because the humidity outside the tent is low enough, so more air circulation could fix the humidity issue without actively dehumidifying I think. I’ve been eyeing on the Apogee SQ-102 PAR meter. Its not perfect for led light but it does give a pretty good idea about the amount of light hitting the plants. I’d like to get a better idea of the optimal distance between plants and light. Especially since i ran into loads of light burn issues in this grow and past grows.
Likes
6
Share
@jahredi
Follow
It’s-a-growing... Not too stoked on how quick the top layer of soil is drying out with the hot weather. Definitely see a decrease in predator mite activity on the surface... hopefully they’re still busy down below. I added straw to help keep the upper layer from drying out... This decrease in beneficial bug activity could also be from switching to tap water... I did some rain water from my barrel to begin with, but got scared of pathogens because I know crows take lunch breaks on my roof and their scraps definitely means rodents coming in to clean up 😩 The tap water has no chloramide in it, so that’s a good thing. Hopefully my tiny air pump and stones bubbling a 5 gallon bucket for 24 hours gets rid of enough chlorine to keep the micro biological ecosytem in balance 🙏
Likes
3
Share
@KcKush
Follow
*Increased PPM from 750 to 850. Possibly 900. *Noticed some of the leaves showing deficiencies. *Transplant will be in 1 week for sure this time.
Likes
56
Share
@nonick123
Follow
Día 8 (28/10) Subo a DLI 20 Spray solo H2O RO en el top del sustrato Retiro la cúpula de humedad, porque una de las CBD Auto 20:1 tenia el tallo ligeramente doblado por falta de resistencia Sin la cúpula y con el ventilador a la potencia mínima (1/10), van a tener una suave brisa que va a hacer que se fortalezca el tallo! Día 9 (29/10) Las plantas se han estirado mucho y se tambalean un poco Creo que deberían haber tenido un DLI más alto desde el principio! Día 10 (30/10) CBD Auto 20:1 y LSD-25 Auto se encuentran "tumbadas" porque el tallo se ha estirado mucho! Hago un soporte casero con una brocheta de madera + alambre + clip de enrejado para mantener los tallos verticales! Spray solo H2O RO en el top del sustrato Día 11 (31/10) Las plántulas se muestran verticales y felices! Una de las CBD Auto 20:1 está mostrando un desarrollo muy rápido! Spray solo H2O RO en el top del sustrato Día 12 (01/11) Spray solo H2O RO en el top del sustrato Día 13 (02/11) Las plántulas se están estirando mucho! Creo que las falta DLI Subo el DLI a 30 Spray solo H2O RO en el top del sustrato Día 14 (03/11) Introduzco la 1ª BioTab a 5 cm de profundidad, lado derecho 1er Riego! 750 ml de H2O RO + ORGATREX 5 ml/L + BACTREX 1 g/L 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/
Likes
14
Share
D85/F41 - 24/06/23 - She's almost ready, I think I'll start the flush soon D86/F42 - 25/06/23 - Temp is still too high, I'm trying to refresh the environment with air conditioning D87/F43 - 26/06/23 - First Thricomes Video. I'm going to start the flush today and I'll arwest next WE D88/F44 - 27/06/23 - Flushing D89/F45 - 28/06/23 - Flushing D90/F46 - 29/06/23 - Flushing D91/F47 - 30/06/23 - She's ready. Tomorrow I'll cut her
Likes
4
Share
@mad_nad
Follow
So... it happened Because of the lack of space and poor light I decided to defoliate them a bit.. No water the whole week, as the soil was still quite humid
Likes
50
Share
Another week just fattening up. Runoff dipped a little low this week causing some yellowing but its been handled. That 2nd led did take the temps up around 6-8 degrees. I'm waiting on the lowers to mature on the larger girl before I start the flush probably around Wednesday. The other looks a lot farther behind and I don't know why.
Likes
60
Share
Beginning of week.. Wow.. Just... Wow lol.. That's all I can say. Amazing scent.. Gorgeous colors.. Very happy and healthy girl. Besides very minor spotting on some lower leaves.. Which I am assuming was from Calcium def.. She is looking great! I'm not sure what this is all about, but damnnear all my plants have this clawing on leaves that are not exposed to the light.. Looks like wind burn.. Looks like nitrogen toxicity.. But I know for a fact that its neither.. Fans are not even really blowing on the plant itself.. And other leaves would also be clawing if it were nitrogen toxicity.. I'm assuming it's just from not enough light exposure.. But not an issue.. She is happy and loving life! At this point I am stopping silica.. Just too many conflicting articles about it not doing any good in flower.. And even causing the smoke to be harsh and the bud hard to break up.. Which does make alot of sense.. I only like to use silica in veg anyways.. And for the stretch.. It just makes more sense to me.. Mid week.. Adjustments need to be made.. The very top of each cola is getting a little bit of clawing.. I'm thinking it may be time to cut back on some Micro.. Maybe even the Floralicious Plus, since they both have so much Nitrogen in them.. She's getting plenty of CalMag, and the other trace elements in the Micro shouldn't be that much of an issue.. Still gonna use the Micro.. Just cut it down from 1mL/L to .5mL/L. Maybe the clawing is just how these plants tend to grow?? I'm not sure.. I see alot of the clawing on her small side branches.. Always have on other grows too.. But maybe I've always been giving them too much Nitrogen in bloom.. Just seems more like a 'not getting light' kinda thing.. But now that it's on the top of the colas.. I'm thinking its a Nitrogen thing.. Anyways.. Such a gorgeous plant! Gorgeous colors.. Amazing smell.. Just... WOW! Lol Next day.. Ok I'm thinking the clawing is getting a little worse.. That's after I fed her using .75mL/L of Micro and about 10 drops of Floralicious Plus.. Both containing a bit of nitrogen.. I'm going to have to completely cut out the Floralicious Plus and just .5mL/L of the Micro.. I hope that doesn't cause any different issues.. It shouldn't.. And I'm going to bump up the Kushie Kush bloom booster a little.. Still not full strength but getting closer.. I hope this doesn't affect my final yeild and/or taste! I will literally cry if the taste is fucked up at all... 😢 lol.. Nah.. As strong as it is now.. I think that would be impossible! I got my new tent in yesterday.. Haven't set it up yet tho.. Gotta get everything ready to switch over soon.. It's still a 2×2.. But instead of 48" tall it's 55" tall.. Which would be a little better for taller plants (not by much.. But still better lol).. Anyways.. No more Floralicious Plus and only about half of the Micro doses (lol) that I intended to use in the first place.. She really doesn't like Nitrogen in flower.. Which is understandable.. But I've never had a plant this sensitive to it before.. Good learning experience for sure! End of week.. So I bought a Brita filter because my tap water is pretty shitty.. 240 PPM - 260 PPM.. I've only ran about a gallon through it and its barely bring it down to 190 PPM - 200 PPM.. I mean.. I also didnt use the actual Brita filter yet.. Just the Wal-Mart brand.. It sucks obviously.. When I run the actual Brita filter in my drinking pitcher.. It can bring the tap water down to about 160 PPM!!! Compared to the Wal-Mart filter.. That is fucking incredible! I'm thinking when I run a couple more gallons thru, it will hopefully bring it down a bit more.. I don't need it to be 0 PPM.. just not 260 PPM.. That's fucking insane! Our water sucks out here.. The plants dont seem to mind very much, but after using the filtered water, instead of the nutrient water being 1150 PPM its barely 980 PPM - 1000 PPM.. NOTot a huge change.. But I think it will help. For harvest, I'll use the FloraKleen once along with distilled water.. Still got a few weeks before thinking about that.. But I always flush with my tap water and can't ever get the PPM below 400 PPM or so... Now about the plant lol... Yeah, it's gotta be nitrogen toxicity with the clawing leaves.. Again, I've went down on the Micro since it has so much nitrogen.. And also cut out the Floralicious Plus.. Sometimes I'll add a couple drops.. But it really makes me nervous lol.. I DO NOT want to hurt the yeild or taste of this girlie! But she is doing good.. Just as a test, I added a little bit of some feminized pollen to a very small nug on the bottom.. Its photoperiod pollen.. But this should create a "fast version" according to Sweet Seeds.. But she is doing good.. Smelling amazing.. Gorgeous colors!!.. Anyways... On to the next week!!!...