The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
@
Follow
Likes
12
Share
@most_dope
Follow
i was thinking about harvesting half and letting the bottom half finish but after chopping some of it i just ended up taking it all down. i knew i wouldnt get a crazy amount of weight from the early mess ups but im guessing it will be about 2 oz when dried. im happy with anything thats smokeable for a first time grower tho and i cant wait to get started on 2 more ladies :D im thinking maybe do the purple punch but this time use a 5 gallon pot so i can see her at her best ! the roots were sure cramped in this 2gallon lol. thanks for reading and following my journey :D
Likes
14
Share
Very easy genetics did only topping at 21st day and just light feed throughout,she is very thirsty for cal-mag from early flowers ,not very much purple going on but i can see some pink going around ,produced very big colas ,now whole plant hanging to dry for about 7-10 days and will update soon 🌞🌞💚✂️😍 End result im pretty happy with love the purple colours too will defo run this again 💚💚💨🍑
Processing
Likes
6
Share
@Kalosoma
Follow
La semana ha ido bien, aunque la humedad sigue siendo bastante alta. Las flores están hinchadas y tienen una buena capa de azúcar en polvo. La próxima semana cambiaré su tanque por uno más bajo para separar los cogollos.
Likes
10
Share
Hello 👋 🤗 Ripening word-forming element meaning "beyond" (ultraviolet) or "extremely" (ultramodern), from Latin ultra- from ultra (adv. and prep.) "beyond, on the other side, on the farther side, past, over, across," from PIE *ol-tero-, suffixed form of root *al- "beyond." In common use from early 19c., it appears to have arisen from French political designations. As its own word, a noun meaning "extremist" of various stripes, it was first recorded in 1817, from French ultra, shortening of ultra-royaliste "extreme royalist." There’s no specific formula for boiling the roots. It’s just boiling the roots, nothing out of the ordinary. Here’s a simple step-by-step process to boil cannabis roots during harvest for utmost potency; Step 1: Detach the roots from the substrate without spoiling them. Some will break from the root ball but retain as many roots as possible. Note that the technique is only helpful when you leave the roots attached to the plants when you boil them. Step 2: Soak the roots into boiled water for about 45 seconds. The water should be hot, bubbling hot, if you may. Step 3. Hang dry the plants while still attached to the roots and let them dry until you can cure them From here we ensure consistency, 60F/60RH with strict measures to ensure little fluctuations. for the next 4-7 days. (edit: Took 9 days)
Likes
4
Share
@Mojoluvs
Follow
So as you know i started this the same time and she started week/slow. However she seems to be doing really good and seems to like being on schedule with the auto gorilla glue. 🤞everything goes well.
Likes
16
Share
@Hawkbo
Follow
They're settling in to the pots nicely and the flower tent is about to be cleared out. Need to do some work around the tent before I can move them should be a week or 2.
Likes
Comments
Share
@CreoWeed
Follow
Hey y'all, how is life? I'm doing alright and my Purple Lemonade also! We are close to chopping time and this beautiful lady start spreading its fragrance through all my flat, amazing! Buds developed pretty good and I start seeing full white trichomes hence I start guvibg her only plain pHed water and will do so for the last 10 days/couple weeks. Another week in the books peeps! We'll meet in 7 days! Stay high, stay safe lads!
Likes
34
Share
@JonnyKush
Follow
Day 51 I finally see that they are gaining weight and starting to regain color. Thursday they will take the advanced nutrients hoping to be able to improve even more. Day 56 the girls are blocked but it is my fault .. I have not given nutrients for the flowering now I have integrated 4 ml/l alga bloom +1ml/l green Sensation 1l/plant I hope to be able to take them back and still get a decent result.thanks for viewing, come back to give me advice and click like! good growth and happy day 🌱 __________________________________________ Gender: Auto Genes: 65% Indica / 35% Sativa Genetics: Wedding Cake x BF Super Auto #1 Harvest: 500 - 750 g/m² Flowering: 70 - 75 days THC: 25.0% CBD: 2.4%
Likes
6
Share
This week consists of July 23, 2022 thru July 29, 2022 - Seeds were planted on May 27th, 2022 and they all sprouted on May 31st, 2022 (~4 days) Continued on schedule of 2 times do feed and then one water with only PH'd water. LIGHTS: I'm running the lights on an 18-6 schedule. I have the dark time scheduled from 11am to 5pm since the lights increase temperature and during that time the outside temperature is at its highest so it seems to be easier to maintain proper temperature ranges with the light off during that period. Swapped out the metal halide bulb to the high pressure sodium on July 6th since the plants have been in flower. WATER: July 23rd: ~1500 ml of 6.1 PH and 1500 PPM. 30 ml/gal of Big Bloom 0 ml/gal of Grow Big 15 ml/gal of Tiger Bloom 0 ml/gal of Cal-Mag July 25th: ~1200 ml of 6.1 PH and oxygenated water July 27th: ~1500 ml of 6.1 PH and 1500 PPM. 30 ml/gal of Big Bloom 0 ml/gal of Grow Big 15 ml/gal of Tiger Bloom 0 ml/gal of Cal-Mag July 29th: ~1500 ml of 6.1 PH and 1500 PPM. 30 ml/gal of Big Bloom 0 ml/gal of Grow Big 15 ml/gal of Tiger Bloom 5 ml/gal of Cal-Mag TEMP/HUMIDITY: A max of 90.0F and a min of 62.8F with an average of 78.8F. VPD was harder to maintain this week since it was in the high 80s and low 90s outside with the average being around 1.59. Whole week numbers> Temp - 78.8F avg - 62.8F min - 90.0F max Humidity - 52.7% avg - 21.0% min - 83% max VPD - 1.59 avg - 0.40 min - 3.20 max CO2: Floating ball is between .5 and 1. This lets a more gradual amount of CO2 to enter the tent and I now get a more stable level of CO2 that fluctuates between around 1000 ppm and 1300 ppm. The regulator is still plugged into the same outlet as the lights so it turns off on the same light/dark schedule. PAR: PPFD between 300-1500. The tops of some plants are getting the 1200-1400 range and some side leaves are getting in the 400-700 range. ISSUES: Nothing new. TECHNIQUES: I implemented some minor defoliation on some of the affected leaves and some leaf tucking.
Likes
13
Share
2 days late this week, my apologies! Pretty much a repeat of the previous week with some nice vegetation coming in. All are looking healthy and growing excessively tall, I think I’ve found the sweet spot on intake at the moment so feeding will remain the same. The MOH clone just went into a Pot and I plan on topping the other 4 potentially next week. Stay tuned!
Likes
36
Share
Major stretching this week! starting to fro up with pre flowers & have been selectively defoliating as usual about every to every other day during the time spent with bought 3 scorg nets like a noob. taking 1 down
Likes
18
Share
@Mastr
Follow
Love the way she grow super easy too look after and produce good yield She drank every other day 3 litre nuts without run off Day 47 I relize she have deficiency so I decide to flush her with 10 l ph water coz bud won't rippen now she is in week 4 flowering and looks how small the bud are I'm so sad 😢 hope she will be OK next week
Likes
36
Share
Likes
2
Share
Processing
Likes
12
Share
@Medicanna
Follow
QUESTION TO EVERYONE READING THIS: My tap water is pH 8.3 (yes I know right ?!) Adding the BioBizz nutes brings it down to pH 6.2 - 6.4 depending on the amount which is great. Now, I dont really care about runoff pH that much, doesnt tell me a lot imo but I measured it twice, last time it was 6.8 this time it was 7.1. Is there anything to worry about or is that just irrelevant? Thank you guys :) Day 48: Watered the Liberty Haze with 750ml Water and 2.8ml / l BioGrow, 2.8ml / l BioBloom, 0.7ml / l TopMax which is the equivalent biobizz week 7 feeding schedule with 70% strength on BioGrow & TopMax and 90% strength on the Bloom. Therefore, dont mind the leaves hanging down, I just watered before taking pictures. Also tied down one or two branches a bit more to make the side branching even again. I dont really realize how much the plant actually stretches, the Liberty Haze seems to start budding already while the G13 Haze is still a bit behind. Day 45: I really wanted to try serious and "professional" training methods. Defoliation was obviously needed, I couldnt even see what was going on below the plant. Removed all leaves except on the top 2-3 nodes of each branch. Then I did some heavy LST to move the side branches to the outside for filling up space. I hope the center will grow some branches at some point. Unfortunately, I couldnt supercrop the main branch like I did with the G13 Haze because the stem is weakened due to the partial break. It looks a bit fouly (the break wound itself) but at the same time it looks like the plant just "abandoned" the damaged tissue and continued growing using the remaining part of the stem diameter. Sounds really weird, but it definitely makes sense considering that the plant didnt even stop growing at all. ~Watered 650ml today, too Day 44: Everything seems to go well. Apart from the snap though LOL. But seriously, it doesnt seem to have affected the plant at all :D I did some LST and was very careful ! The Liberty Haze seems to be a bit stiffer than the G13 Haze so I was extra careful which was a good choice. I decided not to train the main branch anymore at all, just the side branches to keep them even. Lets see :) Also the Liberty Haze is quite smelly for not having buds yet. If it was just the G13, it wouldnt smell AT ALL and I wouldnt even have to use my carbon filter !!!
Likes
125
Share
🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 Welcome to week 9, dear friends!! 😘 DAY 58 Watered with 2ml A+B und 1ml c4 und 2ml PK + enzym+ und 2ml calmag und vitalize 💧 DAY 60 Watered with 3ml A+B und 1ml C4 und 2ml PK + 2ml calmag + enzym+ 💧 DAY 62 Watered with 2ml A+B + 1ml C4 + 2ml PK 💧 Thanks, everybody!! 💚 💚 💚 Grower love!!! 😘🙏 🌱 _________________________________________________________________________________ SETUP: 80x80x180 cm Zelsius 240W Full Spectrum LED IR UV dimmable DW240H-A6-HS Heatsink color red LED Chips: 512pcs SAMSUNG LM301H + 24pcs Osram 660nm + 8pcs Osram IR 730nm + 8pcs UV 385nm Color mix: 2700K + 4000K 2,8umol/J Driver HLG-240H-C2100B Coverage: veg 5x3ft / flower 4x2ft Product size: 628x205x68mm Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! ❤️ If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ Mills Nutrients Biobizz Lightmix custom exhaust fan 320/270cm³/h Carbon Active Granulate 240cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow + Bloom to pH 6.2 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭
Likes
10
Share
@Jerrza
Follow
Mann writing this it feels like so long ago, anyway this our first grow ever this was back in like january ish right before i started LTS like i said it Is our grow ever i didnt wanna fuck up so i never really thought of transplanting cuz yh first timer but as you guys will see the process ngl proud of myself
Likes
2
Share
Just started plagron green sensation along with alga bloom on the pineapple express and BlackBerry autos bu fast buds. They are putting on weight now and are a pleasure to grow.check out fast buds people...
Likes
28
Share
@stevieb21
Follow
For the most part the girls did well other than the Durban Poisons getting some rapid purple leaf on both plants at the same time. One morning temps hit 15c due to an error with my new heater. Hoping that is what the cause is. Got tired of chasing fungus gnats so I decided to fight fire with fire and be a little proactive and release ladybugs and a few million nematodes 🧐🤓. Nematodes will become a weekly part of all growing in the future. As will ladybugs just to ensure they help keeps mites and gnats at bay. No obvious bug damage so far but I don’t want to jinx it as I have 3-4 weeks left on these 🤔🤔. Check it out at thebuglady.ca if you don’t want to use sprays! Till next week!