The Grow Awards 2026 🏆
Likes
Comments
Share
@Prilyfe13
Follow
May 10, 2024 Day 85 A new week and I'm not sure these 2 are ready for flushing. They have way too many white pistils. Plenty of orange, though. Banana Purple Punch A has more orange pistils. Both got a gallon of nutrient water today. So they are definitely still drinking somewhat heavily. And they haven't slowed down yet. I'll keep an eye on them though. Flushing will have to happen sometime. I'd say in the next 3 waterings. That's just a guess based on their current progress. It just seems that they aren't done swelling and there's absolutely no purple coming through yet. Banana Purple Punch A still looks great. Her buds are starting to weight down the taller tops and they are slightly leaning toward the outside of the plant. It's actually quite good. It's opening up even more space for the lowers to get as much light as possible. Air flow is great as well. This is especially important because she is in the back directly under a clip fan. So it's more prone to mold. At least that's what happened in my last grow. This time I have another clip fan across from this one, so the air circulates throughout the whole tent, top to bottom. Banana Purple Punch B looks great! She's not bending any tops, but I don't expect her to with how strong her branches are. Practically immovable. However, she's definitely getting more jiggly. And she has huge buds top to bottom. I wonder if that's the reason she doesn't budge. No room. Lol. Honestly, she may be really compact, but I have her branches spread out enough for good airflow. There's just a couple of clusters that are a bit too dense with foliage, but it doesn't seem to be a problem. Lots of airflow and light. She's a bit behind her sister plant. Way more white pistils and orange on this one. No signs of purple whatsoever. Just a healthy growing plant. I'll be checking trichomes later today if I'm up to it. I hurt my back earlier. Regardless of that, I'll be getting trichome pics today or tomorrow. Probably tomorrow with videos at the end of the week. It's been quite some time since I last took trichome pics. Bad planning on my part. However, I'm excited to see how much further along they are from last time. I won't be changing the light for another few days I think. Then I'll drop the power down. As I said before, I don't think they are ready for flushing, so not ready for light changes. The environment is still a bit off. Today the temp is 76° but the humidity is still high at 56%. This is sure to ruin something. I'm still trying to get the humidity down. I have a feeling I just don't have enough air exchange in my bed room. I'm going to continue messing with it until it's right though. Grow System Environment: Temp: 74.1° RH: 54.2% VPD: 1.29 kPa May 11, 2024 Not a lot going on today. Just some pictures. Banana Purple Punch A is looking really good. She looks to have another week or so. I'm really confused as to why my plants take so long to grow and finish up. Banana Purple Punch B has completely caught up with her sister plant. She has the same amount of orange pistils. That tells me there isn't much left to go. If she caught up, that means Banana Purple Punch A is even closer to being done than I think. Maybe. I'll check the trichomes again tomorrow. No pics unless they are done. I doubt they will be. Especially Banana Purple Punch B. On the other hand Banana Purple Punch A could have only a couple days left and just isn't going to turn purple or fade at all. I'm going to start flushing in a couple days I think. They both look about ready for it. Plus, they are about as big as they are going to get. I think the flush will bring out the colors. So next watering will be the beginning of the flush cycle. It should be in a couple days. Also, both ladies have slowed down on their water intake. So the reservoirs should be empty in 2 to 3 days. Probably 2 days. Then I can clean them out and get to it. The lights are going to be turned down when flushing begins. I'm going to aim for a DLI of 36 mol/m²/d for the rest of the grow. It shouldn't be anymore than a week of flushing before they are done. The environment is still messed up. It got down to 49% yesterday for a couple hours, but then this morning it was right back up to 54%. The temp is fine at 76° Still not cold enough at night, but I have time. A few days to work it out. I'd like to be down to 65° by then for the last week of their lives. Grow System Environment: Temp: 73.1° RH: 53.7% VPD: 1.27 kPa Update: I decided to check the trichomes anyway. Banana Purple Punch A has quite a few cloudy trichomes. Very few amber and a bit too many clear. I'd say she has about 5 days left. Banana Purple Punch B also has quite a few cloudy trichomes. However, she has about 15% to 20% clear trichomes. Amber trichomes are basically nonexistent. There's a few here and there, but mostly on the sugar leaves and not on the buds themselves. I'd say she has another 7 days left. Honestly I don't want to harvest them separately. I'd rather harvest them at the same time, so I might harvest them in 6 days. Right in between. Maybe 7 days if Banana Purple Punch A isn't quite there yet. To be honest, I have no real idea with this strain. They seem to be getting there, but there's no purple, still a lot of clear trichomes and it's been 12 weeks. So it could be another 2 weeks for all I know. I'd like to push them as far as they need, but I have 4 other plants that need to come in the tent ASAP. So I may have to chop a bit earlier than I really want to. I'll post some trichome pics tomorrow and see what you all think. Comments are welcome. Lol May 12, 2024 Some pics today. I'll try to keep this one short. Banana Purple Punch A looks good. I checked the trichomes. Not done yet. I'm sticking by my 5 days estimate. So 4 days left. She doesn't seem to be drinking at all. She is, but it's a trickle. Definitely not like it was. I'll have to empty the reservoir out tomorrow and start the flushing cycle. Banana Purple Punch B also looks great. I also checked her trichomes. She is about the same as her sister plant. Not enough cloudy trichomes, but the amber ones are starting to show up. A good sign. She might be ready in 4 days. I'm still guessing 5 to 6 days. She also isn't drinking nearly as much as she was before. A great sign that she should be starting the flush. For trichome pics, I'll be posting some tomorrow. Nothing to post today. I'll be dropping the light power when I start flushing. Which should be tomorrow or the next day. As I've said before, the DLI will be around 36 mol/m²/d. The environment is a lost cause. I cannot for the life of me get the damned humidity to a reasonable level, so I'll continue to open the tent every couple of hours throughout the rest of the grow. Happily, it's only a few days to a week. The temp is a bit high today as well. 77°. I'm already working to drop it a bit without going over 60% humidity. I should be able to get it down to 74° without a problem. It's just the humidity that's killing me. Grow System Environment: Temp: 73.9° RH: 55.6% VPD: 1.25 kPa May 13, 2024 Flushing day! I decided to rinse out the basins and begin the flush. I was going to wait another day, but I think it's time. They have about a week left I think. Honestly it should be done by now, but they aren't. Lol. No matter. They should be done in about a week. Maybe slightly less. So they have been given 4 ml of Flawless Finish. It should be the only dose I have to give. Maybe one more, but I doubt it. I still need to dry the containers out. That will take a day or two. So maybe a half gallon in a few days, just to get that last push in. Banana Purple Punch A looks great! Some more lean happening with the tops. Nothing bad or anything, just a slight lean. Perfect for heavy buds. I didn't bother checking her trichomes today. No point. You can tell she's not ready just by looking at her. Banana Purple Punch B may need even more time. I'm going to have to decided what to do. Wait for this one to be done then harvest both? Or harvest one at a time as they finish up? Decisions decisions. I'll figure it out in a week. Her branches are really jiggly now. No lean exactly, more like a sway. When she gets moved her top heavy branches sway a bit. Great sign for a heavy yield from a 17" plant. Or is it 19"? Either way, it's going to have a fantastic yield compared to her size. One advantage I am seeing with the longer finish is it will give me time to dry some Tropicana Cookies I am harvesting in a couple of days. I'll be wet trimming this time around and the dry time should only take about 5 to 7 days. Maybe 10, but I'd rather not try to stuff 4 plants in a 2x2 to dry. It's a recipe for disaster. 2 at a time stacked on top of each other. I'll be dropping the light intensity tomorrow or later this afternoon. Maybe even tonight during lights out so in the morning it will be ready for the new day of less light. As I've said before... Over and over... I'll be dropping the light power to 70% which should drop the DLI down to 36 mol/m²/d. Oh, btw, I use the Photone for my light measurements. It has a PAR meter, Lux, DLI and I Believe color spectrum? Kelvin? No clue what that does. I focus on DLI. It's a better reading than just PPFD. The environment is still messy... as always... I'm keeping the temp down to 74°. The humidity at 58%. So it's still too high, but I've done all I can to drop it down and it won't even go below 50% with the tent door wide open. It just won't. So unless I can get the humidity in my room down to like 30%, the humidity in the tent remains over 50%. Hopefully pulling the plants out daily is enough to prevent mold and other issues. There's also the two circular fans. They aren't at full power, but they don't need to be as there's two. Plenty of airflow. I'll really need to keep an eye on these plants. Maybe I'll take them out multiple times a day. Like 2 or 3. Grow System Environment: Temp: 74.5° RH: 56.2% VPD: 1.25 kPa Update: I ordered a new dehumidifier for grow tents today. It should be here tomorrow. I'm guessing a lot of my problem with the humidity is my current dehumidifier. It barely pushes air. Cheap and well used. The new one is from Vivosun. A much more reputable company. May 14, 2024 Trichome day! Alright, so I took some video today. Not the best quality, but I hurt my back so I'm all shaky. The pics were a lost cause. Lol Banana Purple Punch A looks great! More leaning branches. This late in the grow, I don't care. They aren't leaning that bad and it's only showing how heavy these buds are. Trichomes are mostly cloudy with a bit left of clear and nowhere near enough amber. 5 to 6 more days I think. Banana Purple Punch B is so pretty. She has the faintest purple coming from the flowers, but not much. It is a sign that we may end up with a purple plant during flush. Trichomes are partly cloudy with 30% clear and next to no amber. She still has time to go. I'd say another 7 to 10 days. Now I'm overshooting it just incase. I don't think the plants noticed a difference in the light drop, or they did and it's not doing anything. However, I'm not sure what it should be doing. I'm guessing preserving trichomes? Makes sense. Anyway, it's staying at 36 mol/m²/d DLI. The environment is still an absolute mess. The humidity is at like 59% and as always, I can control the temp, but nothing changes the humidity. And it's like 55% humidity out today. Fail. Lol. Grow System Environment: Temp: 74.3° RH: 59.0% VPD: 1.16 kPa May 15, 2024 Nothing to do today. They are still watered and whatnot. No changes in color yet either. I'm starting to think these both will be green phenomes. Or maybe they really aren't ready yet. It's just weird. What am I doing wrong to get all my plants to grow for so long? Oh well. This round is just different because of the other 4 plants that need this space. I really need them to finish up ASAP. No trichome check today. I can still t ell they aren't ready. The bottoms still have a majority of white pistils and the tops are just not there yet. I think they can get denser. They aren't quite rock hard yet, so I know they still have time. Banana Purple Punch A looks amazing. More leaning branches that are swaying in the breeze. No fade yet, but the leaves are starting to look ready for the fade. Maybe. Banana Purple Punch B is strong as ever. Definitely still packing on weight. Definitely not ready for harvest. Still another week I think. I'll check trichomes tomorrow on this one. I think I'll wait for her to be done then I can harvest both plants at once. The light seems to be just being a light now. I can't really see what it's doing, but I know the frost is there. Lol. So it must be doing something. The environment is killing me. Still over 60% and my room has climbed up to 60% as well. I have a heater running and the dehumidifier that I think is done working. My new one should be here today. And not a moment too soon. I should have replaced this one months ago. Unfortunately, I don't have much control over the heat anymore. The humidity is just over powering it and I can't get anything to change. I'm going to crank the heat and see if that helps. Like set it to 80° and see what happens. It's currently set to 74°. And 8 don't think that temp is high enough to combat the humidity. Crank it up! Grow System Environment: Temp: 72.9° RH: 63.0% VPD: .00 kPa May 16, 2024 Today is looking pretty good. I checked the trichomes on Banana Purple Punch B as she has the longest to go. I figure when she is done, Banana Purple Punch A will be as well. I've also watered them with plain water. PHed to 6.2. just a half gallon in the reservoirs. I'm not ready to let them dry out yet. Banana Purple Punch A looks great! Her branches are starting to lean a bit harder and her buds look amazing. No purple yet. Or at all. I'm not sure. But I'm certainly sure that the fade hasn't begun yet. I'm not bothering with trichomes for now. I'll just wait to see what her sister does. I'll check trichomes in a couple of days. Banana Purple Punch B looks amazing. Her buds are fat and dense. She smells great and stays strong. A bit more swaying. But it's the whole plant now. Wonderful! I checked the trichomes on this one. She is developing quite nicely. I'd say another 5 to 7 days? Maybe a little less if we're lucky. There's more cloudy trichomes than before and finally some amber. Much less clear as well. She definitely is nowhere near fading, so that's a concern for time. The light stays the same. It seems to be perfect for these two. So no changes. The environment is still a nightmare, but it's 86% humid outside and 63% in my room. Happily, not really, the humidity is down to 60%. Not good at all, but better than 63% or even 65%. I'm really hoping these ladies are super resilient. They should be. It's FastBuds and they have great genetics. The temp is fine. I haven't a bit higher to help some with the DLI. So it's hanging out around 76° to 77° for now. The new dehumidifier works way better than the other one. But a cool thing is that they are both small, so I fit them both in and it seems to be kinda working. It's keeping the humidity below what it is in my room, but not low enough. I know it will drop when I figure out how to drop it in my room. I really need a big dehumidifier for my room. That would solve quite a bit. Grow System Environment: Temp: 75.8° RH: 62.8% VPD: 1.07 kPa
Likes
182
Share
На этой неделе поработал с ветками в неперспективных местах, удалив все лишнее, что могло бы вытягиваться, вместо генерации цветов. За неделю растение выросло на 10 сантиметров. Проверил натяжение, центральный ствол туго натянул шнур растяжки, пытаясь выпрямиться после освобождения всех веток от натяжения. Пока ещё рано отпускать растяжку ствола, сделаю это после остановки вертикального роста. Ещё одна неделя "вытягивания" впереди, но цветы уже довольно быстро набирают массу. После обрезки неперспективных веток внизу растения, у меня чесалась рука, которую я запускал в гущу листвы. Это словно крапива, жжет, вызывает раздражение и пока не вымоешь руку с мылом в теплой воде, жжение не уходит. Девочка достаточно липкая, чтоб стать в одну линию с уже выращенными девочками и посоревноваться с ними в эффекте и урожае. Запах изменился до неузнаваемости, теперь она не пахнет кошкой, скунсом.... то, как она пахнет, невозможно описать обычными словами...это похоже на запах разнотравья в одном букете. Кажется что тут смесь запахов: чебрец, мята, мать-и-мачеха, плакун-трава и чертополох. Запах сладкий, медовый, с небольшим пряным горьковатым шлейфом. Внешне цветы начали становиться похожими на молодые одуванчики, слегка подкрасив свои стигмы в желтый цвет. После обрезки слаборазвитых мест я попил чай, заварив на свежую в кипятке несколько молодых цветов и листьев. Замечательное пойло, очень полезное для внутренних органов, особенно для пищевода, желудка и двенадцатиперстной кишки. Поднял лампу на 10 сантиметров, сохраняя расстояние между лампой и верхушкой растения - 60 сантиметров. Чуть поднял мощность лампы - 75%, от растения 60 сантиметров, 35000lux, лампа слегка теплая. https://www.viparspectra.com/products/xs-series-xs2000 при покупке примени код и получи скидку 😀👌 код: GDVIP Замечательный опыт, шикарный рост и необыкновенная генетика, подаренная природой! Спасибо всем за комментарии и оценки, друзья! Пихаем воз дальше, выше, в гору. 👍😁👌
Likes
23
Share
Hanno iniziato la quinta settimana di vegetativa...penso che ancora poco e la passerò in fioritura 😂💪💪💪
Likes
4
Share
Muy buenos resultados para el poco cuidado por falta de tiempo! Una maravilla.
Likes
60
Share
The plant is developing well despite the high temperature. During the week the weather got better, the plant is growing well.
Likes
12
Share
Really easy strain, grew super well despite my battling to balance the ph, changing of lights and a massive temperature/humidity spike. Looks good and smells strong. Looking forward to the next grow.
Likes
14
Share
This is my wife’s and I first grow and we’re really excited about it even though we’re on a super budget! Here’s a few tips about our set up: Our MarsHydro 1000 Broke So we’ve been using multiple factory in workshop LEDs and lights to ghetto rig a budget late set up. Any advice would be more than welcomed!
Likes
59
Share
@Rap_a_cap
Follow
Cropped on Sunday evening as scheduled, a few days before complete ripening. I'm not worried about that as this shit plant has the hardest and frostiest buds I've ever seen. The complete pre-harvest defoliation made me understand a few things, stem rot. What I believed was a lack of nutrients instead was some rot at the base of the stem which I did not recognize because this plant was too leafy. This is probably the reason for the buds rot spots, considering that the weather was still dry until now. The loss is few grams so far. The plant has a fantastic skunky and fruity smell and is very easy to manicure.The buds are so resinous that seems to have slime in my hands. See you soon for the report of the harvest. I've decided to do a wet trim and manicure to check out for eventual hidden rot spots, this has required 3 days of work and a lot of spliffs and simply I forgot to weight wet plant. Estimated wet weight is 1,5/2 kilos.
Likes
6
Share
Welcome to week 8 🌱✨ The Girl Scout Cookies ladies are doing good so far. I did some more defoliation and lollipopping. I guess the stretch will be done soon. Unfortunately Salem and Morgana are still standing tall in the back. I still have no idea how to get those main stems out of the hotspot. Edit: I installed an automatic watering system today. Indicidual treatment for every lady. Let’s see how they’ll like it. 🧙‍♂️
Processing
Likes
23
Share
@GrowGuy97
Follow
3 of the ladies are in flush will be cutting them down within the next or 2 & the other 2 probably have another month left! Fingers crossed for harvest!🤞🏼✌️🏼🌱
Likes
7
Share
well she was planted in May late, and I trained from her the start topped her 50 times so she pushes out then tied down and left to grow what dense rock baseball buds bigger than my whole arms
Likes
Comments
Share
This Is Going To Be Massive! I mixed Ocean Forest and cow shit in 4 gallons, then I added Dr. Earth 2-2-2 Fertilizer, and then the other 3 gallons of Scotts Organic. I mixed all that up and I put 2 dozen nightcrawlers in it, and planted it Straight Into It. After it grew some I topped it. Then I topped that one, and again and again lol I don't think I'm going to top it anymore though... I e Got a Tennis Net for My ScrOG net, Cause I Cant Afford Nothing (Tennis Net I Found For .75) I'm Not Feeding It Nothing But Rain Water And I Go Out When It's Been Dry And Water It In The Mornings... Tell me what you think of this jank setup lol
Likes
6
Share
All the girls looking good all have bud forming on their tops this strain has been really with no problems at all. All except one has staid short and bushy the one topped stretched up and fanned out real nice
Likes
2
Share
@TrayyMoe
Follow
Looking Great this week but I just have I am in need of heavy Phosphorus but for now she’s a beauty
Likes
25
Share
Overall a great strain too grow as grows with ease and seemingly without issues even with minimal care. With care she can produce hefty buds, as kept mine small my flowers reflect but still produced great smelling powerfully buds 🌱 Cycle finished in time essentially with ease and I'd be happy too recomend this strain from fastbuds. I will update with more images and videos upon timing complete and give dry weight ect, these girls wont bring much but smell absolute treat. Atm I have tried 1 small nug but still not ready not long untill can trim up, great oils and taste just need a little cure up once finished. Tried uploading longer videos but again says error 👎 have now added few extra videos
Likes
1
Share
@Kynareth
Follow
fertilizantes emerald y tierra biobizz
Likes
7
Share
Que pasa familia, vamos con la cuarta semana de vida de estas Black muffin F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros y el trasplante se realizó correctamente. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Hasta aquí todo, Buenos humos 💨💨💨
Likes
41
Share
15 Day dry then trimmed using the Trim Bin. Curing with Grove bags, first harvest filled 3, 1/4lb grove bags. *Updating with clone pictures of this pheno in late flower labeled in diary as you look through, If I pop a new seed of this strain Ill start another diary
Processing
Likes
38
Share
January 26, 2021 (Week 3, Day 22): Today ended up being an unexpectedly big day. This morning when I checked on the plants, they'd grown another 1.5" over the last 24 hours. They're basically growing out of control at this point. Every plant had a fully developed sixth node that was beginning to unfurl. So I decided to water the plants with 1000ml + 4ml pH Perfect Bloom + 4ml pH Perfect Grow + 1.5ml Cal-Mag Plus + 5 drops of pH down (6.5 pH solution). After that I took the plants out from the tent and began the topping process. I was pretty nervous about getting the snip in the right spot, but I think I've done it correctly. I topped each plant at the third node, then I cleaned all the growth below the node. After that I used rubber-coated garden wire to tie the growth sites to the fan leaves to promote lateral growth. Unknown 2 is definitely the runt of the group and my manipulation of the plant really pissed it off and it started to go kind of limp, so I decided to add a little extra support to the plant until it gets a bit hardier. I think it will take several days for it to recover from this process. The other plants however seem very strong and took the topping like a couple of champions. Gelato 1 and Unknown 1 seem to have great genetics and they haven't skipped a beat since germination. I decided to ditch Unknown 2's top but took clones of the other two plants. This process is flying by so far. Fingers crossed the plants continue to thrive even after my butchering. I've adjusted the humidity in the tent so were now averaging 65% rH and 77℉. Hopefully no other news today! January 27, 2021 (Week 3, Day 23): 24-hours post-top and all the plants have perked back up and I am already seeing growth from the two nodes I left on each plant. I added simple binder clips to the outside of my pot and redid the training on Unknown 2. Since topping, Unknown 2 went from pissed off to happier than ever. However, I have finally run into my first problem. The leaves on all three plants are starting to blotch. I touched one of the blotchy spots and it was crisp and began to crack. Soil is still moist from the watering yesterday. Other than irregular spots, I can't seem to find anything else wrong with the plants. I have a Vivosun pH meter which I've heard can be junk - so I am kind of suspecting my pH is too low. But I'm going to post up a grow question today to get a couple of other opinions. Plants still seem really healthy even with these blotchy patches on their leaves. Averaging 65% rH and 78℉. *Update: The damage on the leaves of the plants started to progress - so instead of waiting around watching my plants get crunchy, I decided to take action. I just flushed all three plants with 4 liters (1 gallon) each of filtered water pH'd to ~6.0. I am getting runoff of around ~6.5-6.6 which tells me the soil is too basic or alkaline. I had read this soil I am using is acidic, so I was feeding with a ~6.5pH solution. From now on I will feed with a ~6.0pH solution instead in an attempt to avoid these pH fluctuations. Before flushing with pH'd water, I tested the soil and all were sitting around ~7.1-7.2 pH. Obviously too high. Got tons of runoff by flushing. Here's to hoping we'll see a difference in leaf texture and color in the next 24-48 hours. This pH problem reared its head at an ugly time since I just decided to top the plants. I think I'll be sure to water with 10-20% runoff from now on so I can keep an eye on the pH regularly. January 28, 2021 (Week 3, Day 24): The last 24 hours were a little scary. As a new grower I wasn't really sure what to expect, and this was my first major challenge. All three plants are now scarred on the main fan leaves due to my inexperience. Gelato 1 looks like it took the worst of it. After flushing yesterday I noticed the progression of the leaf damage stopped almost immediately. Then the leaves began to fill in the crunchy green spots with bright orange around the edges with brown in the middle. It was really strange to watch. The leaves on all the plants are supple, they're just striped with ugly orange and brown scars. It also seems like even with the problems, the plants are continuing to thrive and grow at a surprising rate. Even with the fluctuation in pH and the flush I didn't see drooping from any of the plants. So they seem healthy despite their appearance. In fact, Unknown 1's fan leaves are so happy I've had to pin them down as I was getting too much vertical growth from the cola tips. I think I may have flushed at just the right time. I've never seen something progress on a plant so quickly before. The new growth on the plants seems perfectly healthy without any mottling or spotting. The second node of each growth tip on each plant is starting to unfurl already. All the stems are fattening up as well. It was the first night of 20/4 lighting schedule. Temperature dipped to 70℉ with the light off, but the humidity stayed constant. Average of 65% rH and 75℉. Hopefully we'll continue to see good progress with the new growth over the next several days. Once I top the second set of growth tips I'll most likely clip these ugly fan leaves so they'll stop taunting my inexperience every time I open my tent. 💀 January 29, 2021 (Week 3, Day 25): Seems like the plants are back to growing extremely fast. The scars are getting brighter and the brown parts in the middle have went from crispy to semi-supple. The new growth is bright green and even in color. I had to retrain every plant this morning to keep vertical growth from the growth sites tied against the fan leaf stem. I had to use a second set of ties to tie the second node down. So far my training seems to be working. All plants are working on their third nodes on both growth stems. I'll top once the fourth node begins to develop. The medium is still very moist from the flush two days ago. I don't anticipate having to water for two or three more days. I want the medium to dry out almost completely before I water again. I'll continue with light nutrients - but I'll make sure to run my pH down to 6.0 and I'll also be upping the feedings to 2.5-3l per plant to attain some testable runoff. My new Aperta pH meter showed up yesterday, so I hope to have more accurate readings going forward. Averaging 65% rH and 76℉. Nothing else for today. January 30, 2021 (Week 3, Day 26): Growth sites are stretching nicely along the fan leaf stem. Retrained in a few areas. Noticing slight blotching on Unknown 1's growth. Also seems very dark green with slight burn and dropping at the tips. Conducted soil slurry test and came back around ~6.8 pH. I am suspecting slight nitrogen excess. PPM was very high for this stage at around 1200. Next watering I will skip nutrients as I think the roots are beginning to expand through the pots extensively and may have access to too much nitrogen. Growth is still looking nice and fast. Plants are stretching a bit more with the 4 hours of darkness per night. Averaging 65% rH and 76℉. January 31, 2021 (Week 3, Day 27): The nodes on the main stem of every plant are beginning to swell considerably. Growth sites on all three plants are beginning to unfurl their third node. The nutrient burn on Unknown 1 isn't getting any better, but it also doesn't seem to be progressing. I'm hoping it's just a very slight excess, as it doesn't appear to be slowing down growth or causing any major issues. Gelato 1 and Unknown 2 are thriving and new growth looks perfect. I think the genetics on Unknown 1 may be a little more sensitive to nutrients. Unfortunately since I don't know what the plants are, it has made researching strain tips kind of difficult, so I've been treating every plant the same. The Gelato seems the healthiest of the three plants and is growing vigorously. Because of the training it's starting to look like a salad. I'll go for vertical growth after I perform the second topping. I don't plan on having these plants any taller than about 3 feet, so I anticipate having to switch to flower around week 6 or 7. If the growth keeps up, maybe even sooner. I retrained all the plants today and pinned down Unknown 1's fan leaves to encourage horizontal growth. The cola stems are getting huge and I was able to take off my first set of training braces. I also switched Unknown 1 and Unknown 2 in the tent to promote even growth. Medium is still moist from the flush several days ago. I'll water in a day or two. Averaging 65% rH and 75℉. February 1, 2021 (Week 3, Day 28): Medium was pretty dry this morning. Watered 6.0 pH 2 liters per plant with 2.5ml/l Cal-Mag + pH Down and without other nutrients. I think I'll hold off until flower to give nutrients to the plant again. I was getting very high PPM readouts during my flush, so I think the plants have plenty of food to get through the next three weeks. Just giving a small Cal-Mag supplement each feeding. Got about 10% runoff per plant. Runoff sitting around ~6.7-6.8 pH. Still pretty high, but I am hoping continually watering with a 6.0 pH solution will slowly lower the pH of the root-zone. Plants are growing quickly and I had to pin down the third node on each stem today. All of them are looking more like a salad every day. Fourth node is almost completely out - I'll wait for it to unfurl and top either tomorrow or the next day. Plants are looking good. Unknown 1 still looks to have a slight nitrogen toxicity, but doesn't seem to be affecting the plant's health much. Averaging 65% rH and 77℉ Nothing else to report. Looking forward to next week - the second and last topping will happen in the next few days. After the stems grow horizontally enough I'll switch to vertical growth. I'll aim for about 14" tall and then switch over to flower. Hoping that will be around week 6. Just picked up some awesome flowering powder I am excited to try in a few weeks. Plants are chugging right along! Happy growing everyone! 👽
Likes
410
Share
CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛
Likes
36
Share
We're now cruising through Week 4 of the veg stage, and let me tell you, things are looking positively delightful! Last week, I decided to give my beloved Triton Biscotto Lime a little haircut, also known as topping, and boy, did she respond like a champ! The growth has been off the charts, and I couldn't be more thrilled. It's as if she shouted, "Thank you, dear gardener, for this stylish makeover!" But why stop there? In my eagerness to sculpt this botanical masterpiece, I introduced some wires into the equation. Yes, you heard that right—wires! It's like giving your plants a mini-gym membership to train those branches and help direct their growth. Talk about a green fitness regime! Now, imagine Triton Biscotto Lime flaunting her fabulous branches, all perfectly shaped and styled, like a botanical supermodel. She's the envy of the plant kingdom, strutting her stuff with grace and confidence. It's as if she's saying, "I'm wired for success!" And let's not forget the joy it brings to everyone who lays eyes on her. Friends and family visit, and their jaws drop in awe. They ask, "How did you achieve such a magnificent shape?" I reply with a sly grin, "Well, my friend, it's all about the right wiring and training—a little horticultural secret I picked up along the way." In conclusion, Week 4 of veg has been a sheer delight. Triton Biscotto Lime is flourishing with boundless energy and responding beautifully to the topping and wiring techniques. As I look upon this botanical masterpiece, I can't help but be filled with love and joy. It's like watching a captivating dance performance, where wires and training take center stage. Remember, my fellow gardeners, sometimes all it takes is a little wire and training to create something truly extraordinary. Embrace the journey, have fun, and don't forget to share a good laugh along the way—because, as we all know, even plants appreciate a good wire-based joke! Until next time, keep gardening and spreading the love! As always thank you all for stopping by for the love and for it all, hope you all surrounded with love , health and blessing of all kinds <3 <3 <3 Genetics : TRITON BISCOTTO LIME - @SeedstockersOfficial All info and full product details can be find in can find @ https://aptus-holland.com/ https://seedstockers.com https://autopot.co.uk/ https://lumatek-lighting.com/ #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #growerslove #dogdoctoofficial With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing in return and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 More info and updates @ https://growdiaries.com/grower/dogdoctor/official https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg <3 <3 <3 Growers love to you all <3 <3 <3 <3<3<3 have a bunch of other journey going on, fell free to stop by and say hi, don be shy <3<3<3 Strain info : Triton Biscotto Lime Fem seeds You are standing before a feminised weed seed that comes blessed from the cradle, as she’s born from the cross of two genetics that are all the craze in the current cannabis scene. On the one hand, Oreoz Mintz, one of the winning horses of the new generation of the Girl Scout Cookies family; on the other, Lemon Tree. This is an epic parental lineage that results in a hybrid with a slight sativa dominance and dazzling qualities, with a short flowering of just 8 weeks and THC levels that can reach up to 22%, causing a very energetic and euphoric effect which is perfect for social events or if you’re looking for top creativity. Triton Biscotto Lime is a feminised strain that’s very easy to grow indoors, although she reaches her maximum potential when grown outdoors bathed by the sun of warm climates like the Mediterranean. She loves light and an aerated substrate, which allows for good oxygenation of the roots and helps the plant absorb the maximum number of nutrients. In return you will get dense and compact marijuana buds in a neon green colour which are sprinkled with amber pistils and covered in a glaze of beautifully crystallised trichomes. As her name suggests, her aroma and flavour are a subtle mix of earthy sweetness with a citrus touch, calling to mind a tasty cookie dessert with a lemon base and some hints of Diesel. A highly addictive flavour that you’ll be happy to taste free of any guilt for wanting to repeat the experience over and over again. So if you’re looking for a feminised marijuana seed that represents the best of the current cannabis scene, with high-calibre properties that contribute to her excellent reputation, then Triton Biscotto Lime has arrived on the market to meet your expectations. Try her now and become hopelessly devoted to her - Friendly reminder all you see here is pure research and for educational purposes only -