First grow ever, GMO auto Barney’s farm

1/10, placed the seed in slightly warm water solution with 3% h2o2. After 3 hours the seeds cracked open exposing the radicle so placed it directly in the prepared jiffy pellet (Expandend in water for 15-20 min, then squeezed the fuck out of it and rolled between fingers to fluff the peat) about 1 cm under the surface, covered with sprinkling peat and compressed slightly. For the next 2 days moistened up the jiffy regularly with the solution using a nebulizer, keeped at max humidity, 25-27c, inside a plastic dome under the light at 40% 75cm 18/6 03/10 Day 0 - She breaked the soil. From here trying to keep a steady 22.5-25 c with 70-80% humidity, struggling a bit with the dome and using a small cheap circulation fan. The tent has not the in-line fan yet and most intake ports are closed 05/09 Day 2 - Prepared the 20 L smart pot with terra canna professional moistening it up around 30-40 % moist content with the recommend dose of biocanna rhyzotonic, 2-3 cm of perlite layer at the base of the pot under the mix layer, then transplanted directly the jiffy without removing the paper cover (I worried about the jiffy crumbling and exposing the radicle). The same evening I gave the rest of the solution and the substrate collapsed a little, should be normal. 06/09 Day 3 - Humidity rising up excessively due to the well watered pot and lack of air exchange. Trying to re-stabilising it by directing the small fan closer to the pot surface, opened up the intake ports. Temps slightly on the lower end 20-22.5c. Light at 50% 60cm