5 leaves 5 branches same node

The first week of vegetation is here, and it’s been a bit of a mixed start for my two plants.🌱 One of them is looking a little droopy, while the other has developed slightly yellow leaves. I’m not entirely sure what’s causing these issues, but I’ve decided to give both plants their first dose of nutrients to help prevent further damage and hopefully get them back on track. I’ve been checking on them daily and keeping a close eye on their progress. I’m staying hopeful that they’ll bounce back and show improvement by next week.🌱

Harvest Time! Meine absolute Lieblingszeit beim Growen! Nachdem die Lady ca. 1 Woche ohne Wasser war, wurde sie unten am Stamm abgeschnitten. Daraufhin hab ich mir erst mal die Pflanze angeschaut, ob sich irgendwo Schimmel gebildet hat. Gott sei Dank blieb sie davon befreit. Die Pflanze an sich wog etwa 320 g. Die kleineren Triebe wurden abgeschnitten, und die Buds daraufhin nass getrimmt. Die Blüten weisen einen Mix von Grau/Lila/Grün auf. Sehr schönes Erscheinungsbild! Die Buds bringen (inkl. Stängel) etwa 192 g auf die Waage. Der nasse Trim etwa 45 g (Tara von etwa 5g wurde hier abgezogen). Bin natürlich gespannt wie viel trocken auf die Waage kommt und vor allem wie sie am Ende schmeckt :D Die nächsten Wochen kommt dann ein smoke Review inkl. Trockengewicht! Vielen Dank fürs mitverfolgen und bis zum nächsten Mal! Gruß Wulle

Salinity - The concentration of salt in a solution. So a 100ml of water with 3.5g of Sea Salt gives an idea of metric. Growing well. Not going to top or do any training, I'll let the plant do its own thing, building foundations now for what it senses ahead. Smart girl, Im just the HVAC guy. ✨️ The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity." Electrolysis of water is using electricity to split water into oxygen (O2) and hydrogen (H2) gas by electrolysis. Hydrogen gas released in this way can be used as hydrogen fuel but must be kept apart from the oxygen as the mixture would be extremely explosive. Separately pressurized into convenient 'tanks' or 'gas bottles', hydrogen can be used for oxyhydrogen welding and other applications, as the hydrogen/oxygen flame can reach approximately 2,800°C. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base) Photoelectrolysis. Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen which can be used as a fuel. Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.12v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: removing chance of oxygen exceeding 30% and going boom when mixed with the hydrogen as its released, whatever hydrogen is released is sucked back through oxygenated water circling quartz The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen -- H2 -- 0.00005% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." "salt from sea spray" in the air, cool, so like how much air do I need to run through my medium to collect this sea spray you reckon? Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. Just run me a hose up to the heterosphere and I'm good then.

Salinity - The concentration of salt in a solution. So a 100ml of water with 3.5g of Sea Salt is what nutrition you get in that picture. Growing well. Not going to top or do any training, I'll let the plant do its own thing, building foundations now for what it senses ahead. Smart girl. ✨️ The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity." Electrolysis. Electrolysis of water is using electricity to split water into oxygen (O2) and hydrogen (H2) gas by electrolysis. Hydrogen gas released in this way can be used as hydrogen fuel but must be kept apart from the oxygen as the mixture would be extremely explosive. Separately pressurized into convenient 'tanks' or 'gas bottles', hydrogen can be used for oxyhydrogen welding and other applications, as the hydrogen/oxygen flame can reach approximately 2,800°C. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt) Photoelectrolysis. Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen which can be used as a fuel. Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.12v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen -- H2 -- 0.00005% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. "salt from sea spray" in the air, cool, so like how much air do I need to run through my medium to collect this sea spray you reckon? The homosphere is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. Just run me a hose up to the heterosphere and I'm good then.

Ph 6 water for 24, will be moving to paper towel so far so good Planted 22/01/25 #3 #4

Wedding Cake is almost ready but unfortunately both Cookies Kush need a lil bit more time. I guess we good to go in 2 Weeks from now on. 💚

Nutrient deficiency? or over feeding nutrients? Normally feed 3days nutirents 1 day ph water messed up my feeds which made me feed nutrients for 4 days instead of my intended 3days which may of caused yellow tips. only on a couple of the leaves i (THINK) i might of caught pretty early Flushed with ph 5.9 water saturday 18-1-25 as of 19/1/25 24 hours later no signs of it getting worse or on any other leaves decided to cut big fan leaves of to try and direct the growth more to the nodes going to leave it an hour or 2 to see how she reacts to what ive done then if all is good i shall feed with nutrient Nutrient mix 5litres H202 2.5ml Silicate 3g Calmag 5ml Micro 5ml grow 5ml bloom 4ml Ph 0.1ml 22-1-25 no feed for two days to see how it holds up..(Its holdin up) last feed was 20-1-25 just some light LSTand defoliation today on 22jan just to keep all branches around the same level the banana cookies that was planted same time seems to be a bit behind and is not on the same path

Yes, now i have all 4 seeds open 😁. Peace

Seems like FFOF burned her just a slight bit on the first pair of leaves.. new growth looks fine so hopefully she gets used to it and does better… I’ll keep updated within the next couple days

Day27 video

Just chopped these 3 girls!

Foxtail:///

Going well

60x60 cm tent in a 1920's peek-in-closet Oversized vent for silence High power DIY LED True SoG 12/12 from seed with 15 plants in 2L pots Watering all plants in bottom tray with 30% of total pot size (10L) WEEK 1 DAY 1 - Germinated in paper towel DAY 3 - Planted into pots + Lights ON at 125w DAY 5 - All plants have broken soil DAY 7 - Slight stretch - Light at 185w WEEK 2 Two of the Iced Out are lagging behind, others are on point - I'm trying to push light and nutes to the max. Extraction fan (AC infinity Cloudline T6) on level 2. DAY 13 - First full watering (10L) with 20 ml Canna Terra Vega DAY 14 - Circulation fan turned on (low) during lights on WEEK 3 Good growth, two Iced Out still lagging DAY 18 - Light at 225w, Extraction fan on level 3 during lights on DAY 20 - 2nd watering, 8L with 30ml Vega + Light at 250w

Borax laundry detergent. Also known by its scientific name, sodium tetraborate. The atomic structure of sodium tetraborate, also known as borax, is made up of two tetrahedral boron atoms and two trigonal boron atoms in a fused bicyclic structure: Two fused distorted hexagonal (boroxole) rings and one distorted octagonal ring Anion Tetraborate anion (tetramer) with the formula B4O2−7 Sodium tetraborate, Na2B4O7 Sodium tetraborate is a naturally occurring, powdery, white mineral that is used in laundry detergent and cleaning supplies. It is an ionic compound that dissolves easily in warm water and reforms into large crystals when given a surface to attach to. Sodium = Salt Tetra = Greek "4" Borate = Boron After my 2 month coma stone we are back at it. New digs too. Experiments have shown that treating soil with magnetized water and/or low-frequency current (0.5 or 5 A) activates soil potassium and phosphorus, thereby increasing their bioavailability. 23. Chemical Abstracts 96: 49235b; ibid., 96: 67828b 24. Appl. Electr. Phenom. 6: 454-458 (Nov.-Dec. 1967) Aloe vera is ideal as a rooting powder alternative because it contains glucomannans, amino acids, sterols, and vitamins. Studies show that these help many types of species develop more and stronger roots when growing cuttings or propagating via air layering. The ancient tradition of Sacred Geometry is still alive and well in the person of Frank Chester. He has discovered a new geometric form that unites the five Platonic solids and provides some startling indications about the form and function of the human heart. This new form, called the Chestahedron, was discovered in 2000, and is a seven-sided polyhedron with surfaces of equal area. Frank has been exploring the form and its significance for over a decade, His work has potential implications across a number of areas, from physiology to architecture, sculpture, geology, and beyond. Organic cotton stands out with a frequency of 100, mirroring the human body's frequency. *burp* It's all about the salt https://www.seafriends.org.nz/oceano/seawater.htm Water will be moved counterclockwise around quartzite oxygenated. Plants need elements for normal growth. Three of them--carbon, hydrogen, and oxygen--are found in air and water. The rest are found in the soil. Six soil elements are called macronutrients because they are used in relatively large amounts by plants. They are nitrogen, potassium, magnesium, calcium, phosphorus, and sulfur. Eight other soil elements are used in much smaller amounts and are called micronutrients or trace elements. They are iron, zinc, molybdenum, manganese, boron, copper, cobalt, and chlorine. They make up less than 1% of the total but are nonetheless vital. Most of the nutrients a plant needs are dissolved in water and then absorbed by its roots. In fact, 98 percent are absorbed from the soil-water solution, and only about 2 percent are actually extracted from soil particles. on that note, some points of interest regarding Boron. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6073895/ Boron (B) is an essential trace element required for the physiological functioning of higher plants. B deficiency is considered as a nutritional disorder that adversely affects the metabolism and growth of plants. B is involved in the structural and functional integrity of the cell wall and membranes, ion fluxes (H+, K+, PO43−, Rb+, Ca2+) across the membranes, cell division and elongation, nitrogen and carbohydrate metabolism, sugar transport, cytoskeletal proteins, and plasmalemma-bound enzymes, nucleic acid, indoleacetic acid, polyamines, ascorbic acid, and phenol metabolism and transport. This review critically examines the functions of B in plants, deficiency symptoms, and the mechanism of B uptake and transport under limited B conditions. B deficiency can be mitigated by inorganic fertilizer supplementation, but the deleterious impact of frequent fertilizer application disrupts soil fertility and creates environmental pollution. Considering this, we have summarized the available information regarding alternative approaches, such as root structural modification, grafting, application of biostimulators (mycorrhizal fungi (MF) and rhizobacteria), and nanotechnology, that can be effectively utilized for B acquisition, leading to resource conservation. Additionally, we have discussed several new aspects, such as the combination of grafting or MF with nanotechnology, combined inoculation of arbuscular MF and rhizobacteria, melatonin application, and the use of natural and synthetic chelators, that possibly play a role in B uptake and translocation under B stress conditions. Apart from the data obtained from agricultural reports that prove the involvement of B in plant growth and development, B often results in deficiency or toxicity because it is a unique micronutrient for which the threshold levels of deficiency and toxicity are very narrow [12]. B deficiency and excess are both widespread agricultural problems for higher plants in arid and semi-arid conditions. B deficiency was primarily observed in apples growing in Australia in the 1930s and subsequently reported in more than 132 field crops grown in sandy soils with low pH and organic matter from 80 different countries [28]. Depending on the age and species, plants manifest a wide range of deficiency symptoms, including stunted root growth, restricted apical meristem growth, brittle leaves, reduced chlorophyll content and photosynthetic activity, disruption in ion transport, increased phenolic and lignin contents, and reduced crop yield [1,8,20]. The prevalence of symptoms depends on the severity of the B-deficiency condition because plants show uniform deficiency symptoms on entire leaves but sometimes in the form of isolated patches. Given the immobile nature of B, it usually accumulates in mature leaves, whereas young leaves do not receive sufficient B for proper growth. Thus, the deficiency symptoms first appear on young leaves, including thick, curled, and brittle leaves with reduced leaf expansion; corky veins; interveinal chlorosis; yellow water-soaked spots on lamina; and a short internodal distance, resulting in a bushy plant appearance [14,29,30]. In severe cases, leaf apex necrosis and leaf dieback occur [12]. The expansion of stems and petioles leads to hollow stem disorder in broccoli and stem crack symptoms in celery [1]. However, in tomato, cauliflower, apple, and citrus, scaly surface development with internal and external corking of fruits is a typical feature associated with B deficiency [13,28]. Amino acids improve plant nutrition by affecting soil microbial activity through the production of a beneficial microbial community and nutrient mineralization in the soil solution, thus enhancing micronutrient mobility [84]. Seaweed extract contains several ions, growth regulators, carbohydrates, proteins, vitamins, and polyuronides, including alginates and fucoidans. These polyuronides can form highly cross-linked polymers and condition the soil, thereby improving the water retention and ion uptake capacity within the soil [89]. Kahydrin, a commercial seaweed component, acidifies the rhizosphere by altering the plasma membrane proton pump and secretes H+ ions that change the soil redox condition and make the metal ions available to plants, leading to improved crop production [90]. Turan and Kose [91] applied three seaweed extracts, including Maxicrop, Algipower, and Proton, on grapevine (Vitis vinifera L. cv. Karaerik) to check the ion uptake efficacy under optimal and deficient ion availability. Maximum micronutrient uptake under optimal conditions were observed with no significant difference among the three kinds of extracts. The alteration in uptake of one ion influences the availability of another ion [85], supporting the idea of B uptake through biostimulator application, but this requires further investigation. The application of biofertilizers opens new routes of ion acquisition by increasing nutrient use efficiency in plants. In this regard, mycorrhizal and non-mycorrhizal fungi, endosymbiotic bacteria, and plant-growth-promoting rhizobacteria are important because of their dual function as microbial biostimulants and biocontrol agents. We explain the functions of these biostimulators and their possible relationship with ion acquisition in plants. Indeed, grafting and AMF inoculation improve plant physiological and nutritional aspects and a number of studies have proved their pivotal role in B uptake [74,75,79,105]. Additionally, nanotechnology is an emerging technique to solve plant-nutrition-related problems. The combination of these techniques may improve B uptake. For instance, a combination of grafting and Cu NPs improved growth and development of watermelon by increasing ion uptake [129]. Melatonin application improves plant performance by inducing resistance against stress conditions. According to a report, melatonin application reversed the toxic effect of B by moderating B accumulation in leaf and fruit, increasing photosynthetic activity, and improving dry weight that ultimately enhanced plant growth of Capsicum annuum [138]. Similarly, in watermelon, melatonin application enhanced the N concentration in roots by improving root elongation, root diameter, and root surface area under limited N availability [61]. However, no evidence for B uptake under deficient conditions has been found yet, and that requires further investigation. https://pubmed.ncbi.nlm.nih.gov/8508192/ https://pubmed.ncbi.nlm.nih.gov/34988929/

This week they grew a lot. One pheno reached 35cm and the other 30cm, that's with training. These girls will stretch a lot . I will switch them to flowering tomorrow. So far the LST only is bushier and 5cm taller but still early to to judge.

Last week.