Likes
Comments
Share
Welcome to Flower Week 1 of my Tiny Pot Journey! Pistols are shooting out of all nodes. I started the week off by adding a pinch of Gaia Green's All Purpose & Power Bloom to the top layer. After that, topped up Herbie with a couple finger fulls of living soil. 😉
Likes
10
Share
@Sators
Follow
Day 88 – Botanical Simplicity, Natural Strength 🌿🌞 The journey of this plant continues to unfold as a true outdoor minimalist grow. With nothing but sun, air, and a single black fabric pot nested in a white bucket, she has proven the power of natural light and biological momentum. After thriving through the UK’s recent heat wave and absorbing up to 2000 μmol/m²/s of sunlight, her structure has matured into a strong, well-formed canopy with vigorous apical dominance and defined lateral colas. Her lush green leaves show excellent health overall, though some lower yellowing is now visible — an expected and natural sign as she redirects energy into flower production. The Bat Guano top-dressing from 08.06 seems to have fueled the transition into mid-flower with solid nitrogen-phosphorus support. Bud development is now advancing daily with visibly expanding calyx clusters and well-stacked nodes. This diary is not about chasing perfection — it’s a living testament to how far you can get by trusting the rhythm of the elements. No boosters, no artificial lighting, no stress. Just patience, observation, and a little care. Nature grows. We observe. 🌱📓
Processing
Likes
19
Share
Hi everyone :-) This week it has developed really well 😍. it was also topped for the first time. Like the Cup, I will not do an LST here either, just top it a few times 😃. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱
Processing
Likes
23
Share
* ***************** Week 2 of Growth From Seed, April 18 to 25, 2020 - Days 8 to 14 from germination ********************** * Getting rolling on week 2. She is not growing super fast. Suspect I have gotten a little heavy handed with the nutes again a little early on. Keeping an eye though and haven’t been too far off. Switch CalMag this week and going with GH as it has a 1% value for Nitrogen. Will be increasing the CalMag now as well. Will be getting ppm in the 500 range more this week. May start to introduce Sensyzime at the end of the week. Keep moving the lights up and down trying to dial in between 18” and 30” and see how they react. Seems to be about 28” right now they are happy. Playing with the VPD and finding that they are not as happy with the VPD up around 1.0 and rather happier around 1.4??? Happier meaning tips and looking like she is getting bigger. Played with humidity this weekend as well between 52% and 75%. Again, they seem happiest around 58%..........going to try that for a couple of days and see how they grow for the next few days. I feel they are alrighty slower at the high humidity. Not backing away for this but rather trying to read the girls🤪🤪🤪🤪 *****Daily Detail: Apr 18, Day 8 - VPD - 1.1 - 0.5L feed with Vitathrive and Velokelp and Dual Fuel @ 0.75ml/L, CaMg+ @ 0.75ml/L = 575ppm, 5.8pH. - playing with humidity up and down today. - ready for a plain water feed and a little larger quantity to soak all the medium. - not sure if tomorrow though.......might be a little wet yet in the medium. Apr 19, Day 9 - VPD - 1.3 - 2L watering today with CaMg and Sensyzime @ 1ml/L each. 240ppm with 5.9pH. - Had more runoff, that was the goal. Didn't bother to measure this though. - Just trying to bring the medium pH in line and reduce some of the ppm. - Things just aren't progressing as I think they should. Apr 20, Day 10 - VPD 1.5 - dry out day - lower humidity in tent to 55% Apr 21, Day 11 - VPD 1.5 - dry out day, again. Humidity kept low. - Added home made CO2 to the tent today. - 2.5" tall only. - wavy leaves so think she has battles some pH issues.......some sensitive than the other strains currently?? Apr 22, Day 12 - VPD 1.4 - Dry out day yet again but now raising the humidity back to 65%. - tips back up today. Apr 23, Day 13 - VPD 1.4 - 0.5L - P & V & Vitathrive @ 1ml/L, DF & CalMag@ 0.5ml/L = 410ppm and 5.9pH - primarily calmag and something for roots. - She has straightened out more today. Apr 24, Day 14 - VPD 1.4 - 0.5L - Voodoo and Piranha and VeloKelp @ 2ml/L = 180ppm pH'd to 5.6 - tough week.......she battled over watering as a result of some over feeding last week.
Likes
4
Share
@MML420
Follow
Mid of the week I topped the first 14 plants. They were stressed a bit but recovered well. I installed a Levoit Humidifier for better humidity management. Its starts when humidity is under 60% and stops when is over 70%.
Likes
18
Share
Day 73 - 16/06/2025 Harvest day! 🧑🏽‍🌾 I've checked the thricomes from Strawberry Cola 2 and decided to harvest it. The thricomes started being ambar on top buds and as a heat wave is coming I decided to harvest early schedule and leverage 3 days before the heat wave. It's weighing 355g wet and it should go over my expectations dry. It would be around 120g. It's a nice strain completely frosty and with terpenes bit different than Strawberry Cola 1 . Mainly fruity terpenes. I did a wet trim and stored all big leafs with thricomes for washing them later. Cheers! 🍁🤞🏽🔥
Likes
152
Share
@BioBuds
Follow
The end of the fourth week. Only 2,5 to 3 weeks to go, since this is the FAST version of Gelato 33 by Advanced seeds. Last week temps were better, so that was a lot better to manage. The smell is a different story. We are trying to combat it as we speak with a double filter which my friend still had from a previous grow. The ladies are performing, however, because this is a monstercrop with many budsites, none of them will be very big. We anticipate a lot of cutting come harvest time. The stickieness and smell (cookies, dough, herbs, spices, gingerbread, vanilla) promise a lot to make up for that hopefully!! The middle plant that seemed to go fastest, now looks like to have the hardest time flowering. Her more advanced stage of flowering as a bigger clone, made it harder for her to return to veg, which she never really did. This seems to make her want to rush to the finish, as she is already browning the pistils. Also these buds seem more flakey, popcorny. As if the many flowers and grapelike bundled growth was too much for her. I put the light a little closer, to help her fatten up in the time she is given. I never expected the two 'runts' to outperform the mighty middle clone, but hey seem to fatten up and age much more nicely. So for now, prelimenary tip: make sure all your plants are completely revegged before flowering and consider that faster flowering species might have some ruderalis ancestry that might siderail all your lighting intentions and remains in flower what ever the growers lighting schedule. So with at least two more weeks for the two outer plants, and well see how many for the middle one, we are going to make them as comfortable as possible the final push of this flowering. Thank you for following and see you next week!!
Likes
Comments
Share
@mihixd
Follow
2 plants have finished stretching while the 2 small ones are still in veg? vegging plants are ~40cm, biggest plant 75cm😄 D29 2L bottomwatering, last time i defoliate the plants for at least one week. D32 mix or top and bottomwatering 5L per plant. 2 blooming plants got calmag+bloom, vegging plants got calmag+grow+pr I definitely overwatered today a bit, but the plants handled it fine. D34 Placed a new light above them. 600W from
Likes
46
Share
Week 5 day 36F FLUSHING Using advanced nutrients flawless finish and 2gal PhD water to flush. Every 2/3days when soil is dry. Starting now with 2 days darkness. Still in awe with this pheno, the colours, density, smell are all beautiful on this plant 👌💚 😂👉In the video check toward the end when I zoom in on crown bud, I'm high as sh right now and it looks like a smiley face 😁🤣 saying 2more days mofo and we ready 💪💪💚 Thanks for following I'll be back with the chop in 2-3 days 😱😂💚
Likes
16
Share
Still having loads of trouble with light burn / stressed out plants. Leaves pointing up, turning yellowish. Lights are now even at 80cm above plants, can hardly go any higher. I'm surprised, because the Hans Panel 180w is used at 30cm in numerous grow reports online with no issues. Must be the combination thats too much. 420 watts in a grow tent, and leaves are burning alive. If that ain't proof that LED's can't 'outperform' HPS ;) Does anyone have tips & tricks for making my plants healthy? It feels just silly to remove a light and continue with only 180 or 240 watts total.. Should I use CO2 tabs or something? Do they actually work at this point? Questions questions.
Likes
41
Share
Day 56: Watered the plants 0.5L with nuts, 4L total, 875 ppm, 1861 us/cm, PH 6.4 Day 58: Watered the plants 0.5L with nuts, 4L total, 923 ppm, 1963 us/cm, PH 6.5 Day 60: Watered the plants 0.5L with nuts, 4L total, 840 ppm, 1787 us/cm, PH 6.4 Day 62: Watered the plants 0.5L with nuts, 4L total, 898ppm, 1910 us/cm, PH 6.4
Likes
10
Share
@Virga22
Follow
These Ethos Seeds are showing an amazing burst of energy. Really impressed, it's intriguing me.
Likes
5
Share
Nothing really Changed. Did a topping today. She's A little taller. Love to See her growing ❤️
Likes
24
Share
so were almost at harvest, have begun flushing this last week and hopefully will be chopping beginning of next week, then the cure... CAN NOT WAIT TO BUST UP SOME OF THESE NUGS AND PACK THEM IN THE BON 😆
Likes
14
Share
I CHOPPED ABOUT 15 AUTOFLOWERS AND MOVED SOME OF THE PHOTOPERIODS FROM THE 5X5 TENT INTO THE 8X8 TENT. ONCE ALL THE AUTOFLOWERS ARE CHOPPED I WILL MOVE ALL THE PHOTOPERIODS INTO THE 8X8 AND THEN I WILL SWITCH THE LIGHTS TO 12/12👍🤘🤘🤘 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍