Likes
Comments
Share
@tribe4tix
Follow
flowering day 59/"FD59" (flowering week #9 since 12/12): ... the final 1-2 weeks with only water/no feeding :) flowering day 60/"FD60" (flowering week #9 since 12/12): i just uploaded a video 😎 flowering day 61/"FD61" (flowering week #9 since 12/12): early today i spotted four banans/nanners (first row right) und two banans/nanners (first row left) in the 80x80 240W tent on two plants in the (closest to the camera) first row. Cause they are nearly finished i decided to crop these 2 plants. They look really beautiful and purpled very much., I think the reason for the purple is that that they where the closest plants for the fresh air within the airflow and it was sometimes a little bit cold. I am a little bit frustrated cause the quantity could be 50% more but this time i am pretty sure that the LED panel was too close and/or too much power (95% powered 2x 120W panels). Next time i will use a new tent and plan to spend more time for the hole air and carbon filter setup. This time i had not enough space to raise the panel higher... Maybe the spide mites attack in the early flowering stage was also a factor. flowering day 65/"FD65" (flowering week #9 since 12/12): just a few shots before the final crop in ~1-4 days 😎 Summary for the next grow: 1. next time i will raise the LED-panels distance higher and reduce the power to 80% in the late flower 2. buying a better 80x80 tent 3. i will use poison in the last days of the vegetative phase again to be 100% sure that mites&thrips have no chance 4. four plants in 11L pots are enough in the 80x80., Otherwise it is hard to keep care of the plants in the last row. This will make the veg-phase longer (training) but i think the better airflow and more space are really better 5. next time i will use a scrog-net again... handling to stabilize the buds every day is too much work 😂
Likes
11
Share
@Labar
Follow
Bloom well Adding 20w lighting side. Biotabs Bio PK is back! Top lighting stills 50% capacité.
Likes
1
Share
@CaliJ
Follow
grows almost on its own, really easy👌🏻
Likes
39
Share
@Siriuz
Follow
Happy growing everyone Thank you so much sweet seeds We promise and we are here to show you Stay tuned because we just started And she will grow beautiful indeed Best of luck to all growers in their journey DAY 1 TO DAY 3 THEY FINALLY SPROUT FIRST COTYLEDON SHOWING DAY 4 TO DAY 5 HAD TO MOVE HER TO A BIGGER POT DUE TO TAPROOT COMING OUT OF PEAT MOSS
Likes
2
Share
Likes
9
Share
A planta segue bem parou de crescer na última semana e começou a engordar as flores.
Likes
Comments
Share
Shes filling out my Grow Cabinet. with a size of 70x50cm in week 7 shes definitely the biggest autoflower ive grown so far. cant wait to see them buds appear. 😁 reduced daytime by 1 hour. leafs started drooping about 2 hours before the lights went out. also raised the lamp a lil bit. running the p600 at 75%. DLI 30 to 42. PPFD ~600 (center) Filled up the Solution with 5l EC 1.3. mixed with the solution that was left in the tank i end up at EC 1.0. no claws or burned tips. no leafs been yellowing so far. so i think it should be fine for now. see ya next week. ✌️🌱
Likes
1
Share
@BaBiL
Follow
Wuw. This is a magic from my hands .
Likes
12
Share
This was an easy grow, and had some amazing results. This is some of my best homegrown to date ❤️ the ladies were easy to manage, no PM, pests or disease. The root balls were enormous, wasn’t much soil to recover. They got heavy in the end from the weight but managed to stay upright for the most part. They were big stretchers , prepare for that, scrog was a good way to go but some of the eager beavers got away from me, which ended in some massive colas. Overall easy to grow, no surprises and you won’t regret the results! 10/10 ❤️👊🤤
Likes
19
Share
It's been a pretty good week. Carl 2 stretched out like a motherfucker, nearly a four inch stretch as of today. The accidental topping due to blunt trauma a while ago seems to have stopped the stunted growth and allowed it to really shoot upwards and outwards. The split on UKBS 2 is still necrotic, and the effects seem to be travelling down the stem. I have a fan on it for airflow and I'm hitting it twice daily with a vinegar solution to try and kill off what seems to be white mold in the stem. As of recently the spread has slowed down somewhat, so I'm feeling hopeful. Next feeding it'll get hit with another round of nature's candy and velokelp to try and build some strength back up and come out a real winner in 3 months or so. The tent has been flipped to 12/12, but the outdoor plants wont be flowering for another 3 months-ish minimum, so this diary's gonna get a little interesting in terms of week type. Carl 1 is incredibly stretchy inside the tent, almost 6 maybe 8 inches from when I flipped and Scrogged. Gave Carl 1 a fat haircut a couple days ago, she reacted quite well. Updates will come throughout the week. Happy growing and thanks for checking out the grow. By 5/11/2021 - I've acquired some peroxide to try and assist UKBS 2 with the mold/pathogen issue. The previous night's application seemed to work, and I applied again today. Hopefully she'll pull through. One of the main stems is drooping massively, I may lose it but hopefully not.
Likes
1
Share
Gave a nutrient boost and set to 12 hr. Still doing LST but I will probably unleash once it actually starts flowering. Been a bit lazy with defoliation but that can wait until flowering as well. I think it will be due for cal mag and some flower nutes in the near future.
Likes
27
Share
September 10th, Like I mentioned in my last post. She started flowering. But i was truly amazed The flowering of rhis girl from the week is nothing like what i have witnesssed so far in my grows outdoor. Usually outdoors, plants preflower and stack up for ages.(4weeks or so) This Killer kush seems to skip time and pop out nugs all at once. Tiny balls all over this plant now. Buds ..inside, outside and.in between Cant wait so wait to see how this one progresses during weeks to come ! Weather was stormy for a few days. Fortunatly more sunshine is on it's way...according to weather model.
Likes
2
Share
Amazing harvest!! I get way better results using NPK only and 1 Bud booster, and of course calmag+, but everytime i use multiple additives it gives my plants more problems!!
Likes
Comments
Share
@Shawnman
Follow
Lollipop the bottom 1/3. Plants are around 18" tall. Looking great. These girls look like they are ready to begin flower so they got flipped day 45.
Likes
51
Share
Well, it was my first diary here, and I'm really happy to had found this amazing community that is so eager to help! It gave me the opportunity to win the first giveaway in my life 😂 And it was from RQS! These seeds are in my new grow diary, and I really thankful for all the gift received! A special thank to Pol from the RQS staff! A special thanks to everyone who watched me grow here, and I hope to contribute with the community more and more!
Likes
24
Share
*****Week 15 growth – March 13 to 19, 2021 – Week 6 flower ****** Feeding has ended this week and we are in flush mode now. The girls have just started to slow down their drinking and pistols are changing colour, buds are swelling, they are getting ready to finish. Added the UV and IR light bars in this week. Started the week with just one bar and then both in place by end of week. Each bar has 10 x 730nm, 10 x 395nm, 6 x 660nm pulling 30 watts each. Trichome enhancers!! Working with the new light this run I have certainly pushed them with more light intensity than they should have received, broke 1100 PAR for a bit. This has also started to cause some foxtails to begin rather than staying compact and swelling the buds. Know for next time……always changes to make 😊 Little more detail….. Mar 13/21, Day 36 - Feed day with full line of Innovating Plant Products but at ¾ strength. - Keeping up the feeding but thinking about nitrogen levels and working on reducing. - feeding with grow – 0.5, micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 0.75, B Storm – 2, S Storm – 3, Terp – 3, Jet Fuel – 1.5, Rezin 1 - 1300ppm and 6.2pH - GSCHB – 3L - Added in the first UV bar today Mar 14/21, Day 37 - Seeing lots of swelling these days from the girls. - Microbe feeding today…….possibly last round of microbes. - Plain tap water with Recharge @ ½ tsp/gal and Natures Candy @ 1.5ml - 400ppm and 6.1pH - 3L all around today…..very little run off. Mar 15/21, Day 38 - Another feed day today. Last week of feed so pushing them a little more. No Grow added! Last couple of feeds with CalMag as well, seeing some magnesium issues so giving last dose. - feeding with micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 1, B Storm – 2.5, S Storm – 3, Terp – 3, Jet Fuel – 1.5, MagNifiCal – 1.5ml - 1175ppm and 6.0pH - GSCHB – 3L Mar 16/21, Day 39 - Just giving the basic building blocks at this stage. Most of the supplements not added this feeding. - feeding with Grow – 0.5, micro – 1.5, bloom – 2, carbs – 1, Rezin – 1.5ml, MagNifiCal – 0.5ml - 875ppm and 6.0pH - GSCHB – 2.5L Mar 17/21, Day 40 - Last Feed Day……calling it at day 40 this run!!!!! - 4L of feed water left from yesterday so added in 12L of RO water to keep the ppm down. - Left over plus Rezin @ 2ml, Overdrive @ 2ml (its hard to let go of your routines…I have been using Overdrive for so long……it feels wrong to not be using it this run….snuck in a couple ml😊) - 485ppm and 6.0pH – GSCHB - 2.5L - Light power pushed back up to 525 watts……..keeping the intensity up to hit the lower bud sites….will see what happens to the uppers. Mar 18/21, Day 41 - Starting flush but not hitting the pots with 12 gallons of water each type of flush! Will just drop the ppm down to nothing and use RO water……planning on having close to 3 weeks to flush….second guessing that I really have that long though so may actually end up adding a flushing agent to the girls…..decide in the next 4 days so can leave plain water time if I do. - Watering with Enzymes @ 2ml…….clean up the roots and help them get more of the ppm out of the media. - 100ppm and 5.9pH……..missed the pH but not adding both up and down, ran with this. - GSCHB - 3L - Light power pulled back down 480 watts Mar 19/21, Day 42 - Dry out day today. Will be letting the pots get dryer now before adding more moisture. - Leaving them for today though. Give flushing agent in next 2 days if going to. - Work down the light intensity more in next couple of days as well. - UV lights going now for 3 hours per day on both fixtures at the middle of the light schedule.
Likes
7
Share