Was away 18/6 allday 19/6 *Water day / Looking thirsty -Temp 25-27day/21-23night -60% RH (2+-) -950ml to Biobizz Topmax, Bio heaven, and Bloom (1ml/L) biobizz grow 1ml/L 20/6 -Temp 25-27day/21-23night -60%RH (2+-) 21/6 - I did some defoliation/trimming and removed a couple of branches that i didnt believe in. -Temp 25-27day/21-23night -60%RH (2+-) 22/6 Some pistils are starting to show, they look happy, but soon thirsty. -Temp 25-27day/21-23night -60%RH (2+-) 23/6 *Water day + i denoted lower shoots and romoved a couple branches and small leafs -Temp 25-27day/21-23night -58% RH (2+-) -1050ml to Biobizz Topmax, Bio heaven (1ml/L) Bloom (2ml/L) 24/6 Removed a couple of top fan leaves that were shading some tops. It looks good an healthy -Temp 25-27day/21-23night -55%RH (2+-) 25/6 -Temp 25-27day/21-23night -53%RH (2+-)

She's doing amazing, probably the biggest yield of the 3 plants. She's got quite a while left before flushing, those foxtails take a long time to grow. She's smelling super gassy and sweet/sour.

Slow and steady wins the race Juan has slowed right down Finally the leaves are starting to turn, this is the latest in flower the leaves have lasted me. Shame she isn’t fattening up

She's doing amazing. Leaving for holiday in a week, so hoping my roommate will be able to take care of it. Was hoping she'd finish before I left for holiday but it doesn't seem like that's happening... She's smelling amazing, a bit kushy and pretty sweet. Looking very icy too.

Hey Canna Fam, So day 72 of 12/12 and I harvested my Plat. GSC and she was looking amazing. Buds are dense dense DENSE and sparkling with trichomes. I harvested the tops and will leave the lower canopy to mature for another week or 10 days. Hope you enjoy the update and keep posted for dried and trimmed buds.✌️🏼

Training still going well. Top is pretty even with some slower lower branches I may remove. Have a mite problem so I introduced 5 ladybugs that immediately went to work on the soil and leaves. Watering when dry but may end up transplanting into new soil if the bugs keep on bugging. Continued training a bit and decided to defoliate and take off some of the lower branches lacking growth. Continuing to water when dry while preparing to add more nutrients for flower production. Hoping she takes it well!

Had a little magnesium deficiency early in the week. That has been corrected, I’ve switched from Cal/Mag to Mag/Sulphur now. Plant is in its last week or two. She is smelling very strong of Limonene and Pinene, and is soooo sticky. She has been very thirsty, as she is only in a 3 gallon pot. Just cruising to the finish line now 🇨🇦❤️🌱😎💨

🚨 Durbin Thai/Cinderella 99 week 20 update 🚨 🚨 141 days old!! 🚨 🌸 Day 50 of Flower 🌸 So this is a clone I received on Jan 31st. She has been transplanted from a solo cup 2 a 5 gal pot. She had 2 be topped in her second week of rooting do 2 the top frying from to much light in young clone stage. Since the topping this lady has come 2 life!! She has been defoliated 4 times! Most recent defoliation 3/24! She spent her first month feeding just off nutrients in fox farm soil. On 3/2/22 I gave her her first Gaia Green trio feeding!! She has exploded with growth since!! She was defoliated on 3/27 again. She was given her second feeding of @gaiagreenorganics on 4/02. This lady was defoliated on 4/10 and 4/19 and 5/1. She received a all purpose/bloom feed of Gaia green on 5/2. She was also flipped to 12/12 light cycle on 5/2. She received a heavy defoliation on 5/29. 5/30 gave the girl a 15 tablespoon dose of Gaia green worm castings. Installed the new Marshydro Fc-4800 in the tent on 5/31!! She received her full bloom feeding of 5 tablespoons of power bloom on 6/2!!Marshydro Fc4800 was set 2 100% power on 6/13 which is start of week 6 of flower. This is what she looks like today!! 💡 Grow Sponsor💡 @marshydroled__amazon @marshydronnier #marshydro #fc4800 Marshydro equipment-- Marshydro- 4x4 grow tent Marshydro- Fc4800 Marshydro- 6" inline exhaust fan with digital temp and humidity sensor Marshydro- 6" carbon filter Marshydro- 6" Black duct line Other companies in this grow- @foxfarmsoilandfertilizer - 100% ffof @gaiagreenorganics @inkbirdofficial - WiFi temp control @madmanplant- 6" Tent shelves #rvagrown #rvagrower #cannabisgrower #homegrown #hightimes #weed4ptsd #weed4veterans #veterangrown #tricomes #ledgrown #weedstrains #indoorgrow #indoorgrown #tentgrown #supportlocal #growlocal #letsgrowrva #weedismedicine #420 #veterangrower #clonegrown #marshydro #fc4800

This week went pretty good, the flowers are getting super sticky and smell amazing, but they're packing on quite as much weight as I hoped. I had a friend over who told me it looked like I was growing a tree in a solo cup, so I think I might run these same genetics back next and pot her up from a solo cup to a 3 gallon pot, get the manifold built, then pot up to a 12.5 gallon air pot. I am going to take the wife on a couple vacations or "holidays" as most of you would say. But yeah I plan to run the same genetics, same training, same lights, everything and see what kind of difference a larger pot alone can make. Anyways not much left for me to do until harvest, I am watching the trichomes closely, I will probably start the flush within a week or so. Thanks for stopping by, be safe and blaze on.

Ok, so photos are finally in flower, autos will have to do with 12/12 till finish. A batch of 15 more photos is brewing outside the main door, all primo. Plan is to veg em out there for 4 weeks and then in the flower room. Will fill in missing spots with more autos and then a late auto run as batch 2 of photos finishes. Will get my 7 lbs or so @peakyplanters - slide in my dms

Day 28: I got home from 10 days of holidays and these girls had cruised along as if I had been there with them the whole time. They are very happy, especially the middle one. The small one on the right has always been small, is what it is. She could be a stack little shorty. Time will tell. I did a feed today, top dressed according to Gaia Green at 15 ml/ gal of media which should last approx 2 weeks. I also added a bit more 444 just to make sure there’s enough N during this stretch phase. All 3 have pistols showing and are starting to flower. I was unable to train as much as I’d have liked but is what it is. Sometimes the more indica strains I’ve done are negatively effected by topping and excess training. I removed a couple huge fans that were shading too much of the plant. I also am trying a “super cropping” of top fans to get them out of the way but still save them as a nute source if they need. We’ll see how it goes. The Vipar spectra xs2000 is killling it as usual. As I’ve said 50 times it’s super powerful and I’ve had to raise the light above recommended height as I started to see leaf edge curl and light stress. No problem at all tho, better too powerful and raise it than too weak and have loose buds. I did a micro top just to stop excessive apical meristem stretch and leaving all the other lower branches too low for effective light absorption or burn on the top cola. Happy Growing 🌱

Day 28: I got home from 10 days of holidays and these girls had cruised along as if I had been there with them the whole time. They are very happy, especially the middle one. The small one on the right has always been small, is what it is. She could be a stack little shorty. Time will tell. I did a feed today, top dressed according to Gaia Green at 15 ml/ gal of media which should last approx 2 weeks. I also added a bit more 444 just to make sure there’s enough N during this stretch phase. All 3 have pistols showing and are starting to flower. I was unable to train as much as I’d have liked but is what it is. Sometimes the more indica strains I’ve done are negatively effected by topping and excess training. I removed a couple huge fans that were shading too much of the plant. I also am trying a “super cropping” of top fans to get them out of the way but still save them as a nute source if they need. We’ll see how it goes. The Vipar spectra xs2000 is killling it as usual. As I’ve said 50 times it’s super powerful and I’ve had to raise the light above recommended height as I started to see leaf edge curl and light stress. No problem at all tho, better too powerful and raise it than too weak and have loose buds. I did a micro top just to stop excessive apical meristem stretch and leaving all the other lower branches too low for effective light absorption or burn on the top cola. Happy Growing 🌱

Day 28: I got home from 10 days of holidays and these girls had cruised along as if I had been there with them the whole time. They are very happy, especially the middle one. The small one on the right has always been small, is what it is. She could be a stack little shorty. Time will tell. I did a feed today, top dressed according to Gaia Green at 15 ml/ gal of media which should last approx 2 weeks. I also added a bit more 444 just to make sure there’s enough N during this stretch phase. All 3 have pistols showing and are starting to flower. I was unable to train as much as I’d have liked but is what it is. Sometimes the more indica strains I’ve done are negatively effected by topping and excess training. I removed a couple huge fans that were shading too much of the plant. I also am trying a “super cropping” of top fans to get them out of the way but still save them as a nute source if they need. We’ll see how it goes. The Vipar spectra xs2000 is killling it as usual. As I’ve said 50 times it’s super powerful and I’ve had to raise the light above recommended height as I started to see leaf edge curl and light stress. No problem at all tho, better too powerful and raise it than too weak and have loose buds. I did a micro top just to stop excessive apical meristem stretch and leaving all the other lower branches too low for effective light absorption or burn on the top cola. Happy Growing 🌱

Dia 32: agregamos mas sustrato a cada planta y realizamos poda de hojas bajas y nudos mas desfavorable Dia 35: agregamos la primera dosis de blossom blaster pro. 6 ml en 6 litro de agua, aplicamos 500ml a cada planta. Dia 37: aplicamos 500ml de agua por planta. Dia 38: sesión de fotos a todos los ejemplares de este cultivo y rotación de las plantas dentro de la carpa, todos los dias hago estos movimientos para que todas capten la misma luminosidad y el sustrato se seque mas parejo. Dia 39: aplicaremos monster bloom en el cultivo, la solución será de 1.8g (ya que es en polvo) en 6 litros de agua

VERY BIG VARIATION BETWEEN BEANS. ONE IS SUPER AHEAD THE OTHER IS SUPER BEHIND. BUT ATLEAST ALL 5 SPROUTED. THATS NOT BAD. I MIGHT JUST HAVE TO LST. SO FAR JUST BEEN SPRAYING WATER DAILY AT SUNRISE. NOTHING ELSE. IM A SOIL GROWER. THESE ARE ALL REUSED SOIL. ADDED DRY AMENDMENTS AND HOME-MADE WORM CASTINGS AND EGG SHELLS. 3-4 GAL POTS. NOTHING HUGE. BUT I KNOW THEY NEED MORE SUN. THATS FOR SURE. THEY ARE NOT IN THE BEST LOCATIONS. BUT I HAVE LOTS OF FRUIT TREES IN BACK YARD. DIFFICULT TO FIND A GOOD FULL SUN SPOT.

THIS WEEK THEY ALL BOLTED. I GAVE ONE GAL AWAY TO MY FRIEND. SHE'S INTERESTED IN GROWING. SO NOW IM DOWN TO 3 RHINOS. GROW IS VERY GOOD. I DECIDED TO LST 2 OF THE GALS. AND I'LL COMPARE THEM TO ONE W/O ANY TRAINING. SO FAR GROWTH IS VERY GOOD. VERY GREEN. AND STRONG STEM. NOTHING STRANGE.

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

A week has passed since the last time we saw the plants and as we can see, the weather has favored us and they have grown enormously, more than 20 cm each plant, let's see if in one or two weeks the flowering season begins and we can see those first signs of flowering.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍