Likes
Comments
Share
Harvest in week 12. But I screwed up, I didn't have enough room to separate each variety, so I would put an average weight when everything was dry... I had done everything well, I had to mistake on the place of the drying bag Last pictures, mixed buds
Likes
19
Share
Fantastic and easy to grow had a few problems with not having enough light and when i did get the extra light the buds just exploded thanks for all who was following on this journey happy days and happy growing00
Likes
4
Share
@ValtripOG
Follow
Mucho ventilador para poder garantizar grosor en el tallo y mayor crecimiento
Likes
19
Share
Anche questa missione è stata compiuta
Likes
1
Share
@undermink
Follow
At the beginning of week 11 they both look strong and healthy to me. Though their buds still seem smaller than the one in the 20l pot. But the look great after all :) So colorful and frosty (the smaller one) and so big and yellow (the taller one). Can't wait to harvest them :D At the middle of week 11 they both still look great and I think I saw the tall one's buds grow a bit again... There was something strange going on at the top of the head bud (of the taller one). There'S a close up picture... I guess it's just a kind of mutation and no seed. I was shocked first when I thought it was a seed...
Likes
5
Share
Buds seriously starting to fatten up, put out some serious trichomes and smell this week. Smell has intensified quite alot since last week soon as you open the tent the smell smacks you in the face. More trichomes by the day looking like a serious smoke. Upped the EC to 2 for this week to try and get a much out of these as possible. I won't be going any higher than a 2 EC so I don't fry my plants. Some orange hairs starting to appear on both the cereal milk and wedding cake.
Likes
13
Share
Week 9 day 1 video pheno. Gonna chop this week Week 9 day 7 well chop this weekend so on week 10 Day 1-2. Just waiting on a light to reveg one. Everything is magic
Likes
2
Share
Likes
Comments
Share
Nun wurde meine Eigenkreation dem Netz unterbunden und sie entwickelt sich prächtig. Nach einer weiteren Woche des Wachstums wird es Zeit die Damen in die Blüte zu schicken. Das Wachstum ist außerordentlich homogen und die Interniodenabstände relativ Kurz. Eine schöne Hybridform mit aktuell überwiegenden Indica Einschlag. 💚🌲🥦
Likes
18
Share
@Ageddd
Follow
She is starting to getting fat, at the begginning of this week, it was raining, but in the middle of the week, sunny days are appearing, and she is loving it, drastically increased eating levels, in 1-2 days, lower leaves started to yellow, but i noticed soon and gave a good dose with 4ml/l Top BLoom + some carbohydrates, Top Candy 2ml/l, and now she is lovin it. That purple colours appearing...no words... Simply a blessing, even more beautiful :D Last videos are about what i think are Chemtrails, like ie said before, the week started with rainy days, but when the sun came, this kind of biodegradable material appeared again like it is usual, it could be identified as spiderwebs if you dont look closer, but when you touch it is like soap and disappears... Guys and Ladies, let me know what you think if you want to stick a comment :) Take Care GD !!!
Likes
19
Share
@Splashy
Follow
16.01.2026 Heute wurde umgetopft in den 11l endtopf. Ich habe biobizz all Mix für den endtopf genommen, da ich noch genug für diesen Durchlauf da hatte. Als dünger habe ich Greenhouse feeding Bio grow genommen , da ich denn all Mix nehme, habe ich die angegebene Menge auf 1,5g/l Substrat verringert und mit der erde vermengt. In das gießwasser habe ich 1g/l Wasser dann noch den Bio enhancer gegeben, wird ab jetzt alle 14 Tage ins gießwasser gegeben. Den ph auf 6,5 angeglichen und das calmag ebenfalls angeglichen mit 1ml/l. Dieser wird auch mein erster grow sein, in dem ich die neue smarte Steckdose von mars hydro benutze. Mit dabei sind die Sensoren für ppfd, CO2 (das Steuer ich nicht), Substratfeuchte und ec, Luftfeuchtigkeit und Temperatur Sensoren. Ich habe einen luftbefeuchter angeschlossen und lasse das ganze System von der Steckdose steuern. Ich habe meine Luftfeuchtigkeit auf 65 eingestellt und meine Temperatur auf maximal 28°c. Die Abluft geht erstmal nur an, wenn es zu warm oder zu feucht da drinnen wird, sonst ist sie ausgeschaltet. Den Umluft Ventilator habe ich noch mit laufen auf mittlerer Stufe, er ist auf lampenhöhe . Gegossen habe ich, bis unten drain raus kam, in 500ml Schritten. Es waren ca 3l pro Topf was rein gegangen ist bis unten was raus kam. Jetzt lass ich sie erstmal stehen und fange erst wieder an zu gießen wenn die Substrat feuchte unter 60% fällt. Nächste Woche erhöhe ich die ppfd dann auf 300.
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂
Likes
55
Share
@Max1973
Follow
omg, another week has passed...... :) Day 100 - and then there was 11 Buds ....... lol Switched over to normal water on both ... smaller has been on water 1+ weeks ..... Endoscope arrives this week i hope..... harvested afew buds to fit it all in the tent and setup lights properly... trimmed em, wired em abit to support the weight of the buds.... I'll see how the endoscope results show, as to harvest...... i think growth slowed abit over last week or 2, because of poor light setup, not enough room in tent, and other grow 6400k led.... got a new tent on the way... 😎 Day 101 - Pics - edoscope, usb arrived... it's very good, but hard to stabalize / focus, i'll have to work out how to use it better...... the pics i posted were of a younger bud from the bottom..... i'm happy with the cloudy with amber, and harvesting.... 😎 Day 103 - vid of all trimmed and drying out upside down in tent. Day 105 - pics vids of drying and into curing.... i'll list all the test buds and buds i trimmed in the final harvest report.....😎
Processing
Likes
9
Share
Gave them rain water when they needed it 👍
Likes
34
Share
April 19th Another 24 litres of nutes at the same strength. Plants are looking healthy healthy and happy. Getting sticky 👌 April 21st Basically just waiting now Plants are doing well, I am going to change up nutrients on the next fill. I will be adding “Dense Buds” 0-0-62 Straight (K) April 24th Changed nutrients today. I have switched to straight “DENSE Buds” 12 litres @ 2 grams per litre PPM =
Likes
11
Share
End of Week 9 of Flowering! I skipped Week 8 because I literally had no time for an update, but not much changed anyway. Temperatures spiked brutally - during Week 8, my growbox hit 32°C (90°F). To compensate, I dimmed the light to 75% power and raised it to about 60 cm above the canopy. This kept temps around 29°C (84°F), with occasional peaks at 31°C (88°F). Gotta say, the ventilation helps a ton, and I avoided any "foxtailing." Since mid-Week 8, I’ve cut all nutrients and only fed pH’d water at 6.2. The plants are still drinking, and under the 60X jeweler’s loupe, they clearly need more time. Most trichomes are still clear/milky, with very few amber ones—especially on the leaves rather than the buds. I’m a bit worried the heat might’ve delayed ripening. A good sign, though: the natural yellowing of leaves suggests we’re nearing the end of the cycle. The Sensi Stars (supposedly 8-week flowering time) still need longer, despite having the fattest, densest buds of the bunch. For now, I’m sticking to plain water and checking trichomes daily, hoping to chop some plants soon. Pics are below - though I couldn’t get decent loupe shots (blame my phone’s potato cam and the tiny lens size, lol xD). Shoutout to all you legends! Catch you next update. Peace! ✌️
Likes
3
Share
@Joaka
Follow
se acerca la ultimas semanas, esta semana se dejo de aplicar fertilizante con nitrogeno. se ve una translocacion sana hasta el momento. se espera que en las proximas semanas incremente el nivel de tricomas. Queda poco!!! Pd: pido disculpas a aquellos que siguen de cerca este diario, no pude actualizar a tiempo en las ultimas semanas, espero poder actuaizar de forma oportuna las ultimas semanas.
Likes
19
Share
It’s the start of week 4, day 21. Topped today at day 21. Day 22 plant is showing no signs of stress from being topped. I will start lst at the end of the week.