-Everything going good and growth going well -Removed a few larger leaves -Watering with filtered water every few days

Hello Growmies! 🌿👋 Welcome to Week 17 of our Epic Buzz journey! We're observing some noticeable progression in our plants, and we're nearly at the finish line with the next entry poised to be our final harvest week! Here’s the breakdown for our Epic Buzz phenotypes: Pheno #1 is thriving with its buds thickening up nicely, showcasing a frosty appearance that promises high-quality resin production. Pheno #2 remains a bit smaller in comparison, yet it's catching up with an increase in bud density and trichome development. Pheno #3 stands out with its robust growth and resin-packed buds that are slightly ahead in terms of maturity compared to its siblings. As we approach the harvest, maintaining optimal environmental conditions—consistent humidity and temperature—is more crucial than ever to maximize their potential. Stay tuned for our final week's update, and as always, stay lifted! 🚀🌱

And we off

Two girls one cup week 2.. thanks for stopping by and checking out my experiment :) no need to rotate them.. they're doing it all on their own 🤣. hit the girls a little hard with the light last week when i turned it up to warm things up in there. kinda blasted em with 22 DLI and the light may have caused the curling on the Godzilla Cookies. all is well, and theyre moving right along. light currently 18in up, and hitting them with 14 DLI. running the 1/2 strength GHE light feed week 2 since last sundays RES change. will prob keep this RES until this sunday. just top off and PH adjust 8am/8pm daily. kinda excited to see the explosion of growth throughout this week. 3rd true set popping out of both GC and WG, and started LST them their separate ways as early as possible. contemplating topping after 5th or 6th node. havent made up my mind as to when yet. we shall see. roots poking their way through the drainage holes in the bottom of the upper growing chamber. Will have to add a stone to the RES here in a few days time. GHE light feed 1/2 strength week 2 (measurements are per 2gal on 500 scale): Total nitrogen - 47.5 ppm PPM range - 200-275 ppm Spring Water/Tap mix - 220 ppm (calmag and hydroguard already added) Micro 3.6mL - 144 ppm Grow 3.4mL - 77 ppm Bloom 2.6mL - 41 ppm Total = 482 ppm GHE is pretty damn accurate on that ppm range huh? *so far they seem to be loving life.. sooner or later this light won't be able to keep up with their needs. Probably sooner with the rate they're going. *figured I keep them on the 1/2 strength week 2 GHE Flora feed for now. They've been moving right along, and I don't want to over feed em. Next RES change will get bumped up for sure. Made a nozzle for the reptile fogger since the one it had was made for a 1" hose. MUCH better distribution of moisture now. *Wedding Glue def showing signs of being under fed. Taking up more water than it needs to get those nutes. Causing droopy leaves. Hopefully she can wait until the start of week 3 for a bump up. *Nute levels dropping every 12h as expected. Going to crunch numbers tonight to see how much on a 12hr basis to see if we're ready to get bumped up. If so RES changes will be weekly still, just on the week mark instead of Sunday. *WG said fuck 5 leaves and went straight for 7! Crossing my fingers she gets 13 of em so I can break a personal record of 11. That is unless the ruderalis takes over and puts a stop to them multiplying every node. *****anyone got some pointers on how to go about getting a sponsorship? Could use a little 300w artificial sun to brighten up a cloudy day. And to finish these girls right.

Beginning of week 8 and seems like a long way to go. Most of the hairs still white. Hopefully the buds will fill in more! As right now I’m planning to take it 10+ weeks. This week I will lower the CO2 slowly 50 PPM every day until I will reach 800PPM. Also I will lower the light intensity by 2% every day. This week I lowered the day temp to 79 degrees and next week I’m playing to lower it every further to 76 degrees Fahrenheit. Water temp is at 68 degrees and probably from week 9 I will lower it to 66. Beginning of week 8 TDS is at 550PPM. I sent adding the Late bloom enhancer from Current Culture! End of week 8 : lowered the TDS to 470ppm , she seems that it not eating so much nutrients anymore. She still drinking 3 gallons of water every single day.

I don’t think I ever had white powdery mildew and I was just noid of every little dust particle that came around. All good. I’m now battling high temps as we don’t have central air and it’s mid 90s outside. Most likely about to buy an ac unit. LST seemed to go ok but we shall see. Overall very pleased w my results so far. Cheers

Welcome back at the first week in vegetative stage of my Sensi Amnesia. As you can see, she got repotted in a bigger pot with new BioBizz LightMix soil. So far the growth of this lady is good. I started my Honeywell ventilator to give very slight wind in my tent. Also my Sanlight LED is now running on 60% with 40cm distance. This week she gets time to comfort herself in the new environment. Hopefully she will get some new leafs. Day 12: gave her the first water after repotting and added BioBizz Bio Grow with 0,75ml/L Day 14: gave her 0,5l water with 0,5ml BioGrow per liter. End of week 1 without any trouble. It’s nice to see the progress over the last 7 days. Will keep this strategy next week I noticed, that my tab water has a pH level of 7,8. I mixed it with filtered water to get between 6 and 7 Keep in touch ! Cheers HighZenBerg

trimmed and netted the plants last night, 12/30, and the energy pushed the plants to stretch another 1/2 inch+ this will be the last week of vegetation as I prep this light leaking tent for flower, not a fan of mars hydro at all right now. their poles are the weakest I've encountered yet, too many light leaks and this is the first grow with it. My high cfm fan , which is only a 4", is pulling the fabric too much and causing the leaks to grow a bit. This is not new, its been happening with indoor tents for a while now but I thought a grow company such as MH would have a decent, respectable tent. My solution is Blackout Curtains draped over the sides. However, I am hesitant to do this with the MH tent as the poles for the tent are too weak as it is, tsk tsk tsk mars hydro. will continue to increase the watts the next 6 days HAPPY NEW YEAR a combination of light and fresh soil has made the plants stretch so I will finish tightening up the MH tent today and ill start flower tomorrow, day 62. while adjusting the height I must have nudged the dial for the dimmer and sent it to 184w. this would have been a big jump but manageable but I lowered the light 7" and the plants took a bit of a hit. I adjusted the light back down to 160w and I'll let the plants recover before anymore adjustments.

hello, here I am again, after a few adventures.... I had to withdraw my culture at all, because I had problems with French customs (...) but I was able to save a skunk plant that was left, a week in a box, to hide.... the rest I had to throw it away unfortunately... I'm 11 weeks since the planting, I'm rinsing with only molasses the next planting is already on the way, I'm going to make a diary...

End of week 7 in bloom (photos and videos are from day 49) and things are going well so far. I have some yellow leaves in the buds, that i have to remove tomorrow. I water every 4 days and i topped up the pots with soil yesterday. Colas are getting thick and fat and for sure are tall! Depending on their position in the tent, colas are from 35 to 70 cm in heght. In terms of quantity, i think i have about 80-90 big colas in the 2,2 square meters tent so it is possible to achieve an outstanding harvest! We will see!

FERMAKOR BARREL MIX – BASE IN USE (Testing on the Fantasy Feast girl we pulled out of another diary https://growdiaries.com/diaries/274722-grow-journal-by-yan402 ) (FERMAKOR BASE SYSTEM KOH VERSION diary https://growdiaries.com/diaries/278391-grow-journal-by-yan402) (Urea & Micros on the way — first week running without them) 🍶💧🍶💧🍶💧🍶💧🍶 💧 30 L Barrel – Current Working Mix 🍶💧🍶💧🍶💧🍶💧🍶 Step 1 – Calcium Nitrate (Part A) 7 L warm water (~35–40 °C) → added 45 g Calcinit, stirred until fully clear. That’s the calcium + nitrogen backbone for the feed. Step 2 – FERMAKOR PK Base (Part B) 15 L water in the main barrel → added 30 ml FERMAKOR PK Concentrate, mixed well. This forms the main P + K part of the formula. Step 3 – Combine Solutions Slowly poured the Calcinit mix into the barrel while stirring — no reaction, still crystal clear. That confirms the mix is stable and precipitation-free. 🌿 Step 4 – FPJ / FFJ Batch Added 30 ml homemade FPJ (fish + veg batch) ≈ 1 ml/L. Color shifted to a light-amber tone — looks alive and active. 🍋 Step 5 – Citric Acid Balance Added 1 tsp citric acid after everything was blended to fine-tune pH and help chelate micros later on. 📦 Step 6 – Top Up & Check Filled to the 30 L mark with plain water → pH tested with drops, showing yellow-green — roughly 5.8 – 6.0 range. Nice clean look, stable smell, no residue. 💧 Current Base Ingredients (Active Mix) Warm Water ≈ 22 L total Calcinit 45 g → N + Ca foundation FERMAKOR PK Base 30 ml → P + K support Citric Acid 1 tsp → Chelation + pH balance FPJ / Fish Emulsion 30 ml → Organic enzyme booster Result: clean amber mix, mild and balanced. I’ll let this version run for a week before adding anything. 👀👀👀👀👀👀 Observations and changes 👀👀👀👀👀👀 27.10.25 VW27 noticed some min burnt tips so I decreased Calcium Nitrate 45 to → 40g, decided to add two more elements micros and Epsom salts just to make sure they got everything, Fetrilon Combi 1 (Micros): 0.5 g, Epsom salts: 8 g 28.10.25 VW27 she seems devoid of any deficiencies, seems ready for the flip to 12/12 02.11.25 VW27 girl is looking good so I decided to stop making daily videos and do a standard once a week update. 09.11.25 aVW28 7 days since flip,stretch in full swing, first pistils showing, leaf color deep and healthy. Slight tip burn early week → gone after pH stabilized. Feed stayed clear, no residue, roots clean and sweet-smelling, did what I hope is a last cleanup and pruning🎥 10.11.25 VW29 added Phosphoric acid pH down to the schedule for flowering stage. 14.11.25 FW1 FERMAKOR PK Micros 40 → 50 ml 23.11.25 FW2 got some burnt tips, observe and act accordingly in case it worsens, diluted by 25% for this week. 05.12.25 FW3 about 2 weeks ago Calcium Nitrate 35 g → 25 g, FERMAKOR PK Micros 50 ml → 60 ml 12.12.25 FW4 Calcium Nitrate 25 g → 20 g, FERMAKOR PK Micros 60 ml → 80ml 16.12.25 FW4 Calcium Nitrate 20 g → 17 g, FERMAKOR PK Micros 80 ml → 110 ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Fed about 5l a day of #1 and on the weekends I do a pure FERMAKOR PK flush 2l runoff (*RUNOFF reused for tomato plants) 💧💧💧💧💧💧💧💧💧 🌱 Nutrients in 30 L #1 Veg – FERMAKOR 💧💧💧💧💧💧💧💧💧 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g → 35 g → 25 g → 20 g → 17 g = 1.50 g/L → 1.33 g/L → 1.17 g/L → 0.83 g/L → 0.67 g/L → 0.57 g/L = 207 ppm N / 253 ppm Ca → 184 / 225 → 161 / 197 → 115 / 141 → 92 / 113 → 78 / 96 PK Concentrate (FERMAKOR Base): 30 → 40 ml → 50 ml → 60 ml → 80 ml → 110 ml = 1.00 → 1.33 ml/L → 1.67 ml/L → 2.00 ml/L → 2.67 ml/L → 3.67 ml/L → balanced 1:1 P:K + light micros (from extract) Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → ~26 ppm Mg + ~35 ppm S Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm · Mn 0.7 ppm · Zn 0.3 ppm · Cu 0.3 ppm · B 0.1 ppm · Mo 0.02 ppm Phosphoric Acid (pH down) + Citric Acid (chelation): as needed → First set pH with phosphoric acid, then add a little citric only if you want extra chelation Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL: Liquids: 60 → 70 → 80 → 90 → 110 → 140 ml per 30 L = 2.00 → 2.33 → 2.67 → 3.00 → 3.67 → 4.67 ml/L Solids (CaNO₃ + Epsom + Fetrilon): 53.5 → 48.5 → 43.5 → 33.5 → 28.5 → 25.5 g per 30 L = 1.78 → 1.62 → 1.45 → 1.12 → 0.95 → 0.85 g/L YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

So this girl ripened super fast and was harvested on week 8 and that for me is in heard of , I will update more once dried Update well this girl cured amazing and is by far the strongest fast buds to date by far

Just like the other strain from weedseedsexpress.com there starting really strong pushing the shell off without any help. Also they have some purple hue to then already always a good

85 days and absolutely killin it! These blackberry kush autos are absolurely dank! They smell so strong of citrus and diesel!! I cannot wait to try this smoke! I'd say they have another 30 to 35 days to harvest!

No purple yet, maybe never. But still beautiful and smelling very good. Very good harvest coming. Buds getting fat. Given that the soil is organic with a wide variety of amendments I decided not to keep fertilizing with liquid fertilizer.

Gracias al equipo de Seedsman Marshydro XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Tangerine Snow F1 Fast: Esta gran cepa es un cruce de cuatro vías 75% sativa de (Boost x Tangelo) con (Lavender x Power Plant). Este híbrido Fast F1 proviene de la genética Cali y cuenta con excelentes terpenos cítricos, alta producción de resina para extractos, altos niveles de THC, muy buenos rendimientos y excelente resistencia al moho. Tangerine Snow F1 Fast se puede cultivar tanto en interior como en exterior. Los tiempos de floración en interiores son de entre 8 y 10 semanas, mientras que el tiempo de cosecha en las latitudes del norte es en septiembre, mientras que en el hemisferio sur los productores cosecharán durante marzo. Las regiones climáticas recomendadas son cálidas, secas, húmedas y cálidas. Se trata de plantas altas, semiramificadas, que superan los 200cm y que presentan un alto vigor con muy buena uniformidad. Al igual que muchas otras variedades con fuerte dominancia sativa, Tangerine Snow F1 Fast ofrece una excelente resistencia al moho, así como a las plagas y enfermedades de las plantas. La combinación de terpenos cítricos y mucha resina la convierten en una cepa de muy buen extracto, cuyo método de "lavado" produce muy buenos rendimientos de hachís. El perfil de terpenos cítricos recuerda a las mandarinas y mandarinas y también tiene notas dulces. La producción de THC ha sido verificada en laboratorio en un fuerte 24%, mientras que el CBD es bajo. El efecto es edificante y energizante, perfecto para usar durante el día y las primeras horas de la noche. 🌻🚀 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 7: Ha sido una semana algo complicada, tormentas, frio y lluvia han ralentizado el crecimiento, espero que pronto lleguen dias soleados, continuo con 1/3 nutrientes recomendados en cada riego.

So after week separated the clones. Have mommy in the hydro setup and mommy-x in a bdrm window. Started spraying mommy-x with colateral silver 30 ppm about a week ago and now is in flower. Continue to spray for another week and hopefully see some pollen sacs.. Don't care about pH , nuit's, or method of growing. All I'm worried about is getting mommy-x to make x-pollen and pollenate the other clone. Side note: Funny everyone worries if have a hermi, & I'm deliberately making one.. lol

FC-E 4800 lamp , to view this lamp or any other marshydro product go to: https://instagram.com/marshydro_aliexpress?igshid=YmMyMTA2M2Y=