The Grow Awards 2026 🏆
Likes
Comments
Share
@Filiaes
Follow
18.06 A way more late update of this grow as I usually provide for two reasons - first I didn't had any time to control or keep care of this grow during the last weekend, second: due to the first point I run into a problem I needed to identify before I update my journal. As you can see in the video there is one plant with some kind of brown leave tips and yellow sugar leaves. I am not 100% sure why this happened but I think it could be some kind of wind burn. I didn't noticed that one slot of my power strips wasn't working anymore, this slot was turning on and off some fans. So the fans just blow straight at least for two days in a row against the plants. Beside that I raised the speed of my main fan a bit a week ago and the plant that is the nearest to this fan show the signs on the leaves I notice here. So I fixed the fans and observed the plants a bit more in detail the last days. The problem didn't developed further so I think this is fine now. There can also be some other reasons, as I wrote last week I changed a bit my nutrient scheme but since I wasn't above EC 2 at all I am not really comfortable with this theorie. Anyway, I closed the tank from sunday to monday so the plants just had what was left in the autopot system and used that until the next light schedule. Afterwards I changed my nutrient scheme back to the classic Hesi scheme. The plants are really well, the trichomes are still clear so I think we have at least until 3 weeks to harvest. The plants will become next week full scheme, afterwards I will check the trichomes again and decide if I start to reduce the scheme or not as we come closer to the harvest.
Likes
71
Share
@ClubRiot
Follow
Royal Gorilla Week 16 11L Pot LED: SP250 (245W) for Flow. Stage Canna COCO Mineral Nutrients: 👇 Flawless Finish: 2 ml/L
Likes
12
Share
day 49 just pure water phed down. it is day 51, morning before lights on, I might chop today. I use a zero water filter pitcher got off walmart. My humidifier is only a sonic wave. If you use regular tap water it will get gunky in a sonic humidifier. If you have a heat humidifier that boils the water the mist should be clean. These are the 2 types of water humidifiers. Researching best water filters this "zero water" also comes with a free ppm meter! yay! Other water pitcher brands; the water still has ppm. So water misted will still have ppm contamination. You can easily used distilled water only, and reverse osmosis. I just fill a 4gal office water jug with the pitcher and fill my humidifier when needed. I do not use a humidifier in my entire grow up to this point when I chop, I need the perfect rh or this whole effort can fail. growing up to this point only requires 20% effort, chopping now for the 2 weeks dry is this 80% of crucial determination, succeed. A lot of tasks are required today for a clean chop. I feel confident, observed my cross seeds with pink paradise and one with a slightly open caylex looks dark enough for successful germination. I figured 8-16 seeds may be created, 3-4 buds were potentially pollinated. Many growers don't understand when creating genetics with female/female there is a slight chance of herm. You lose 50% of your genetic function. Just water last 2 days, no humic no folvic, 1st time entire grow ha! There is a lot of cleaning to do, remove the trees, clean the entire tent and environment with bleach water, hacksaw. I am very proud of my grow. I have sampled 3 of the strains, dr. thunder legit made my lips numb but it could have just been the terps removing my skin cells from the sticky filter, no lie. This is my best grow to date. I did this for you, and to document hype or not under the best conditions I could give my plants, full max potential, although I wish I had more lights, I am not looking for industrial lol, this is how I grow. Learn a lot on youtube and podcasts there is many good content and I may dab into it. You can have a room full of growers and you have 1 seed in your hand, they will all tell you that their way is correct ;) and the best way. Oreo is stinky AF, Bridal is just amazing glad its massive, just not into sativa but the test seemed slight sativa with majority indica, pink untested, dr, thunder just a lip numming plant aha, its very nice, all 4 amazing appeal like advertised, and excited for next run. Either crosses from this or other copycat genetics. I will give you beautiful glamout shots today, the sizes of the plants, My guesstimate bridal 1lb, thunder 1lb, pink, 0.4lb, bridal 0.5, I am ambitious off 640w lm301h, and 4x 20w blurples daisy chained. day 51 4 chopped see you in a few weeks :D
Likes
53
Share
10 September Harvest - see pictures. While some growers leave the plant whole when they cut, I do not. It is a personal preference and situational convenience if your a home grower. I chose to cut large, long branches, and remove any whole water leaves, as long as it doesn’t interfere with the bud formation. I don’t trim yet. This is done for a few of reasons: 1) It’s my last good close-up look at her until another 5 days or more, 2) I don’t want wet leaves drying on my buds if I can help it, and 3) I occasionally like being able to shine a small LED flashlight on the flowers while its drying. Mold is our greatest problem as growers, it can destroy a beautiful grow right up until the end process. Then I hang it in a dark closet, provide circulation and ventilation. Light and heat, anything above 80 degrees F, will start a break down in cannabinoids during the dry, it is ideal to stay away from both. I’m fortunate that a humidity level of 50- 55% and temperature of 65-70 degrees F is fairly consistent and easy to maintain. Anything below 60 degree F will prevent the adequate drying out of chlorophyll. Almost all my flower routinely take 5-7 days, some a little longer, to properly dry out. 15 September Trim - see pictures. First you’ll notice the buds have shrunk up to half their original size. This is just a fact that we growers have to deal with. Due to evaporation without uptake of water, it takes about 3 days for the chlorophyll to dry up, then slowly go through a chemical change. Along with the leaves, cannabinoids also begin a chemical change after 3 days called decarboxylation. A slow process where the THC level increases while curing. You want the leaf to be dry so they can be hand trimmed easily, but you do not want that bud so dry that it starts to fall apart in your hand. Try to handle carefully by the main stem to avoid touching the bud all together. A lot of these cut leaves will be covered with trichomes, good for making oils, or other products, it’s an option worth looking into keeping it. After trimming, I do separate a few premium flowers for my first smoq. Then loosely fill wide mouth quart mason jars with about 1 oz/28 gr of product per jar. I seal the lids for a few hours to determine what relative humidity they are at, see hygrometer pic, before making a decision to put in a 62% humidity control pack of my choice or to wait, then place in secure in a cool dark place with stable humidity and temperature. It is very important to then observe/burp or exchange the air as needed, up to several times a day, until 62% rh is achieved. Once your close to to your mark, put in your desired RH level control terpene shield. If you have a problem getting there: 1) it has dried out too much, no real solution, try to put several large cut stems left over from harvest into the jars with the buds to try and increase humidty, 2) it has not dried out enough, in this case no problem, just remove and dry out a little more. This is also a personal choice, some people like it drier in the 50% plus range. Whatever you do, research and preserve. At that time burping is no longer required. Cannabis will reach its peak potency potential at about 40 or so days into the cure. The finished product should be a perfect grind when cured correctly without clogging up your grinder, this could take a month. Now that I’ve said that, I’m sure someone has grown something that they have not been able to grind. It can remain in this state for an easy 6 months with little change, locking in all the terpenes and potencies. All you need to do is occasionally check the product to ensure there are no molds. If your grow/harvest/cure techniques are good this should not be an issue. It would not be uncommon to find many cannabis strains will last, with small degradable change, for up to one year after being stored this way. Using an airtight glass container, controlled relative humidity, maintained low temperature, and kept in darkness will equal maximum shelf life. Always avoid direct sunlight and temperatures above 80 degrees F. The reasons I’ve ultimately chosen Deep Water Culture as a grow medium. Each has their own pros and cons indeed. I found the most efficient, less maintenance and ideal solution for my situation was DWC. Burdens to overcome depend on size up set-up; initial equipment cost, size of containers, ph monitors, air pumps, type of water to use-reverse osmosis, RO cost/set-up/maintenance, ways to transfer/change water and nutrients, what nutrients to use and schedules, takes several grows to learn and understand, a 1 year learning curv, easy to nutrient burn. The Benefits of growing in water; no dirt, no bugs, no diseases, rare nutrient deficiencies/toxicities, steady and rapid growth that enables the plant to reach its genetic potential. After harvest, there is about a 1 hour equipment cleanup, sterilization and turn around process before replanting. Cannabis will perform in so many different ways and mediums, no one way is the best and the best way is the one you are using, right. Chose what works for you in the long run. There will always be an initial cost in set-up. My advice if one were in need to cut corners, I would not recommend cheap lights. This single factor is the most critical, afford for the best. The notion that organic and water has a different taste, flavor and potency effect is absolutely debatable. The more we learn the better we grow and experience is always the best teacher. This is what works for me and my methods of growing in general from beginning to end. A BIG “Thank You” to everyone who stopped by to take a look. My next diary will start at the beginning of October 2023 with a Forbidden Runtz Auto. There will be minor differences during the grow. I enjoy Auto strains simply by what can be achieved in a short time. No matter the strain they will unveil one thing in common, the demand for attention. Many times over it is the anecdotal gardener that surmount plant scientist. Last should I mention, do not forget to stop and enjoy the fruits of your labour...
Processing
Likes
57
Share
2/1 - 2/4: I ended up feeding the BJ's and GG's once more, and just plain water for the Zenzations. Moved the to Zenzations into the dark on the night of 2/4 and will harvest them tomorrow (Friday). I'll flush the others tomorrow and probably harvest them next weekend. 2/5: Both Zenzations are having their last bit of beauty sleep before they get trimmed up, cut, washed, and hung to dry. 2/6: Harvested both Zenzations....damn they smell wonderful and have amazing frost! 2/8: Watered the BJ's and GG's today with LiquidSoil. Will flush them really well in a couple more days and probably harvest this weekend...time's up bitches, better put on your lipstick and get ready for the big party!
Likes
11
Share
HARVEST TIME AT DAY 55 - 06/08/21 I wanted to get these ladies cut before we go through a heat spell. they were all ready but the gelato could have used a few extra days to make some more amber trikes... oh well cut them all and hung them at 72F @ 55%RH - hopefully I can keep the temps from fluctuating too much! I did a bit of trimming before the 48 hour dark period but none today see y'all in a week or so... if i can keep the temps good then it should be more like 10 days... we'll see! THCdaddy
Likes
72
Share
@BodyByVio
Follow
The plant is drinking over 3 gallons of water every day. I’ve lowered the PPM’s to 600. Everything seems to be ok now. I will try to change the reservoir water every 5 days from now on. She started to smell amazing! Very lemony 🍋 P.S. Lowerd the TDS to 550 PPM on day 46. Also just realized that I stressed my plan with to much light. I moved the light at 13” and dimmed to 95% ... I will continue to dim it 2% every day...
Likes
2
Share
@Ryno1990
Follow
Strawberry banana ending week 5 of flower looking great finishing up as week 6 will be her flush week to get ready to harvest at the end of week 6 or begining of week 7
Likes
23
Share
Ooooh boy, what an eventful beginning to week 14! I took this beast out of the tent for a reservoir change and noticed that she had a few branches hanging below the canopy in the middle of the plant that had a lot of heat damage. 😩 So that haircut she needed turned into a bit of an amputation... I've never dealt with heat damage before, so I don't know what it does to the quality of the bud, but what I DID know was that if I didn't change something, it certainly wasn't going to get any better. I removed 90% of the heat damaged branches, leaving only the branches that had mild damage to the leaves only. Looking at her, she doesn't look like she's missing much of anything, but what she gained was some more space to breathe and to feel the breeze. 😊 If anyone has dealt with heat damage in the past, I'd love to know what you did about it. Did you keep the buds? Ditch em? Are they safe to smoke? Do you think I did the right thing? Every grow throws me so much more to learn about and so many more opportunities for hands on experience dealing with things that I've only ever read about. It's the freaking tits! ✌️💜🌱
Likes
11
Share
@BudBeezy
Follow
Welcome to week 22 of my grow diary. It rained at the beginning of the week. On Monday and Tuesday I only left the plant outside for half a day and when it rained I put it in the garage so that the buds wouldn't get wet. Unfortunately, in this weather there is a high risk that the flowers will start to mould. Most of the trichomes are now milky. See you next week ✌️
Likes
11
Share
@gsimd
Follow
I'm going away for 30 days about a week into this grow. I'm going to automate weeks 1 through 5 by using the Blumat watering system along with the automated fan from AC Infinity. Hopefully, these will keep things going while I'm gone. I've never used the Blumat products before and I'm excited to see their potential. If I succeed, I'll return to happy 5-week old plants. If not, I'll have to start a new grow...which is what I was going to do anyway. I have nothing to lose but a couple of seeds. Let's get this automated grow started. Day 1 - I placed the seeds directly in a fist-sized clump of Coast of Maine Seed Starter soil that was then placed in a 3-gallon pot full of Coast of Maine Stonington Blend. This will ensure the seedling doesn't get exposed to the nutrient-rich soil too soon. I set the light 2 feet above the top of the pots so they have room to grow into the 18" to 12" range. I also set the light strength to 60% during germination. The temperature in the tent remained 75 degrees and humidity was 70%. I also covered the soil over the germinating seeds with mason jars to act as humidity domes. Day 4 - Both pots sprouted this morning. I immediately removed the mason jar humidity domes. I also increased the light to 70% strength and installed the Blumat watering system to help me keep things growing while I'm gone.
Processing
Likes
3
Share
Hello everyone, Been busy this week working around the house so not much I can say. Heres a little video of there growing... See you guys next week
Likes
11
Share
@NONSENSE
Follow
Very nice genetic. I'll do same Jack H from Fastbuds for sure again. Plant was very strong and ready for training. I still did not smoked it, will replay later about the taste and power.
Likes
2
Share
@Gromie
Follow
Had to add a trellis net, DP all the way on the left was getting way too heavy.
Likes
9
Share
Smelling sweet creamy vanilla undertones of gas this the same girl that almost died before she fully sprouted
Likes
11
Share
The week went really well and we are starting strong into week 3. The King's Juice Auto #1 is giving me some worries because she's a little bit small. Also, I saw an aphid on her. Never underestimate green light spectrum guys! Speaking of light... I raised the light intensity up to 30% (80W) and will keep doing it like this until I end up with a DLI of 40-45. With 19 hours of light that would be roughly 60-65% of light output. Interesting. From the side view, I think #2 is my favorite but overall it's still #3. Still unsure what kind of training I should do or if at all. Alright, I trained them and tried some different strategies. I topped #3 because she was by far the tallest one anyway, I "lollipopped" #1, so that she hopefully pushes more power into the upper part and I just tucked the fan leaves of #2 under the branches. At least as far as I could. #2 definitely has some lovely growing! She also has the first white hair coming out. Will try to get a photo of that later, hopefully with my new wifi microscope. Should be delivered tomorrow. Wasn't delivered but how she develops, I don't need the microscope. First set of white hairs is clearly visible! I'm exited to see how they continue to develop.
Likes
17
Share
@Dunk_Junk
Follow
Wow she shot up this week! grew 31cm! Also she looks like she has just entered flowering! I wonder how long this haze takes to flower. Her leaves are quite broad and indica like. 😔
Likes
176
Share
So, with the harvest complete and the dry finished, the rest is now going into jars for the final cure and storage. Overall I enjoyed this grow, it needed minimal interventions and had a smaller work load compared to the other grows. The amount of dried flowers is 752g (1.11gpw) so a decent haul, I threw a lot of B grade buds in the hash bag due to the large number of low level flowering sites (I need to rethink my canopy management) and also with the lack of stretch after flipping made the internodal spacing a bit too tight. Managed to extract 215g of grade a hash from her as well which I have pressed into a slab (pictures). I learned many things along the way, namely root health and the importance of keeping organic additions as low as possible. I also decided to try out clones for my next run, just to get a little more canopy and growth consistency - those of which are in an aeroponics tub at the moment waiting to root (picture). Thanks for those of you who followed along most of the way, good luck with all your grows!