Nice! So I fixed the issue with the discoloration I believe. Did not change the nutrients at all, only the PH. So what I learned originally from someone was to keep the PH between 5.5 and 6.5, so naturally I just kept it as close to 6 as possible as this is the middle. Doing some research on the deficiency I learned that Calcium gets absorbed best at 6.2 - 6.4 PH. So I have started to create a wave pattern up and down with the PH from 6.3 to 5.7 and back up again. Any issues with this? This IS what i'm so posed to be doing right?? The plants seem very healthy but the flowers seem to be growing a little slower then I would like. Nutirents is around 1350 and I'm using the same line and ingredients as previous very nice harvests? Maybe i just need to give the ladies anoerher week or 2 to put on some weight??

Thought I over did the rhino skin had dots on the leave bit I thing it's calcium or magnesium related so calmag xtra every nutrient feed now.

-Buds are getting bigger by the day -i am now fertilizing almost every day (they seem to like it) -i rubbed on the leafs and the terps are already crazy Happy for any comment :)

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

All love so far girls are beginning to fatten and scent it getting a bit louder without touch...#happy growing

It was my first grow and I really screwed it up a lot, but it resisted all my beginner mistakes, pests, stress, being without irrigation, irrigation without measuring PH, revegetation, etc. I love her, really, in love with this strain. It is a genetics with a very relaxing effect, recommended for those who cannot sleep at night. shoutout for trimix, very good prices for begginers> https://www.trimix-pro.com/

Hello. This is the end of week 12 and the beginning of week 13 of veg. Did a harvest of my grow room because I had found a 3 small pocket of mites, so I thought I was being smart and put my clones in here before they get the mites.... Didn't notice the 3 clones that had mites on them.... now they have been in here 5 days, and I've see the mites and wonder if I've infected the tent... so I bought some Persimilis, predatory mites, and I will get them in a couple of days to release in here. The plants look good and are doing well except for the mites...... OK. Be Great. Chuck..

I added a dehumidifier towards the end of this week to reduce the RH, but the thing i didn't realise was there were some red and yellow led's on the dehumidifier, one displaying RH and another for the power. I didn't cover up either through the dark periods and i just hope this past few days with them on doesn't affect my final yield 😣 Looking at the trichomes am i correct to start flushing now? let me know what y'all think!!

This grow went extremely easy, I believe I held off on harvest till week 13 She dried for 7 days around 55-60 RH and 72-75° F could have been better but not the worst Good moisture level still inside the buds been burping the jars and reloading them letting the RH slowly decrease inside the buds This stuff gave me 1 gram of rosin off a 3.5 gram press at 205°f Great returns overall and awesome smell!

🌸🍊✨🍭🌸🍊✨🍭🌸🍊✨🍭🌸 Back at it with Kannabia — huge thanks for the NEW EXCLUSIVE Upcoming Kannabia's seed Launch 🙏🍨🍊 Grateful for the trust and for everyone following along, I’ll run her clean and showcase what she can do. Dessert-party goals: berry–citrus sherbet terps, creamy finish, tight stacks, easy trim, zero drama. Veg 24/0, clean manifold + LST, flip on a happy, even canopy. Coco’s fresh, seed goes in now. 🚀 🌸🍊✨🍭🌸🍊✨🍭🌸🍊✨🍭🌸 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 10.08.25 GW1 Sowed seed, soaked starter pot with #1 12.08.25 GW1 Seed popped hip hip hurray 28.08.25 VW2 Stopped using GreenBuzzBloom, took it out of the schedule. 01.09.25 VW3 TriPartMicro 10→30ml, TriPart bloom 10→30ml 12.09.25 VW4 Applied nemadodes against thrips and fungus gnats. 20.09.25 VW6 topped and trained for first time, decided against a full manifold as I lost a few weeks already. 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 19.09.25 VW5 – Fed 5l of #1 → 2l runoff 20.09.25 VW6 no water no feed 21.09.25 VW6 – Fed 5l of #1 → 2l runoff 22.09.25 VW6 – Fed 5l of #1 → 2l runoff 23.09.25 VW6 – Fed 5l of #1 → 2l runoff 24.09.25 VW6 no water no feed 25.09.25 VW6 no water no feed 26.09.25 VW6 – Fed 5l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10ml = 0.33ml/L 🍶 TriPart Grow: 0ml = 0.00ml/L 💧 TriPart Bloom: 10ml = 0.33ml/L 💧 Cal-Mag: 60ml = 2.00ml/L 🍶 Home-made FFJ/FPJ (new batch): 30ml = 1.00ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: 120ml per 30L 🔬 4.00ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍊🍧🌬️🍬🍊🍧🌬️🍬🍊🍧🌬️🍬 Mystery seed (Kannabia Seeds) — NEW EXCLUSIVE 🍊🍧🌬️🍬🍊🍧🌬️🍬🍊🍧🌬️🍬 Species: Hybrid (GF / swift-flowering line) Genetics: TBA (breeder sheet pending) THC: TBA Effect: Euphoric, relaxed, creative (target profile) Flavor: Berry–citrus sherbet, sweet candy, creamy finish Flowering (indoors): ~6–7 weeks target (GF) Resistance: High (aim: no drama) Indoor yield: TBA Outdoor yield: TBA Structure: TBA Notes: Brand-new exclusive from Kannabia’s GF line — I’ll update specs when the breeder card drops. Goal is rich sherbet terps (berry–citrus + cream), low leaf-to-calyx, easy trim. Stage harvest stays on the table if tops finish early.

The white residue is from Epsom salt foliar spray... Hydroponic buds (Banana Daddy) are getting noticeably denser than soil (Pluto Runtz)

Plants started to take off and over crowd them selfs

-Strain: Auto Gelato - Fast Buds -Tent: 5x5 Gorilla Grow Tent -Lights: Budget LED Grow Lights 2 x 250 Watt LED Full Spec/Red Spec mixed boards -Light Cycle: 18/6 -Soil: Fox Farm -Air Circulation: AC Infinity Cloudline T6 Inline Duct Fan WECLOME BACK GROWMIES! Week 12 here with our AUTO GELATO by Fast Buds! February, 09, 2020 (DAY 78) - YOO GROWMIES! Welcome to week 12 of our AUTO GELATO! week 6 of flower to be exact! ISNT SHE FROSTY! holy moly look at this thing, can almost go skiing lol! nothing but frost, she is starting to thicken up on the buds, i havent defoliated too much on this one because there is just too much frost all over those leaves. February 12, 2020 (DAY 81) - WHAT UPPPPP!!!! here we are folks another update. i didnt even know there were purples in the gelato auto to be honest, but the purples are getting so VIBRANT!!!!! think she is getting flushed starting this weekend. this will be the last feed then its onto that FLAWLESS FINISH by ADVANCED NUTRIENTS. hopefully im making the right choice......maybe another week wouldnt hurt....

next time i wont Veg under fluorescent lights, needs more power from the start for bigger stem and root system, i cant complain by the end result lol

girl looks great :)

Stretch and fan leaf growth are out of control please send help.

giving a little root stimulator It's a shame there is not enough soil! But the plants will deal with it. Stems are growing beautiful and thick. Temps were a little high. All are growing very fast. 👽

They growing great!!!

I didn t expected nothing from this plant, because of the slow and stunt start, but after the 3rd week it start to get "bigger" i m gonna try it again while i have another seed!💪 Anyway the result wasn t much, but amazing! Thanks for who followed the process, happy grow to everyone!👽

Been keeping a close eye of everything this past week. I was fighting a little with humidity levels as they were staying around 70%. Picked up the Spider Farms Dehumidifier and been running for about 24 hours and got things staying at 60%. Still a little worried for later in flowering as I know Target is 40% so I’ll just continue to work on adjusting levels as needed. I trimmed up the plants a little to increase airflow and also pull out the light controller and ran it outside the tent. The 1st couple days of flowering I ran into an issue as my temperature probe went out and caused my AI controller to not be operable so had to do things manually for the first few days. Ended up splicing some wiring and got things working (ghetto but worked lol) until my new cord arrived. Switched over to Advanced Nutrients and picked up their Starter Box, excited to see how things go as I’ve heard nothing but great things. Started with a lower dosage to get things going. Hoping to see some real growth this coming week! I also started germinating some seeds for my next grow so should be starting a new dairy when those sprout.