Still maintaining, no defoliation up to this point. There are still some deformed fingers on leaves from the stress but they are doing well!

Dark purple buds and frozen cola Finish in 67 days She needs normal light and feeding

01/01/2022 Potting up this weekend I hope 🙏🏻 then on last week of veg feed with coast of Maine Stonington plant food 5-2-4? I think l gotta check that.

First grow so don't really know what to expect but would say it's going pretty well. Weak smell when I take her out to water + feed, but otherwise don't notice it at all. She's really shot up since I started using nutes and switched to flowering, as well as giving up on a few of the lower leaves to focus on flowering. Now looking forward to watching the buds fattening up.

Day #24 I gave her some water although she wasn’t asking for it and did not absolutely need it . I will try and wait until she’s positively thirsty before I water her again. My tent humidity has been dropping as the pots dry out but when I check the moisture levels it shows “normal” also as my pots dry out the ph of the “medium” has risen to 6.8-7.1 . Deeeeeeeep at the bottom of the pot it is 5.5. I’m curious about the fluctuations of “soil medium” . Thought to check the accuracy of my ph pen today before watering & discovered it is out of calibration 2 weeks after initially setting it up . I think I’ll look for another PH pen that I can rely on however I’m glad I had the foresight to acquire ph solutions to be able check the accuracy of the calibration of my pen. I don’t want to feel the need to recalibrate before each use nor the desire to check the accuracy each time which is why I sprung for a more expensive pen this time rather than a “ super value “ ph . Back to the drawing board to find a better product . I am still happy with the performance , accuracy & reporting of my smart hygrometer. I am very glad I sent back the original one and replaced it with a competitor brand . I’m wondering should I be getting ready to give her a top dressed feeding in one week . Orrrrr will I wait until she starts showing hunger signs . I premixed more than the recommended amount of plant food when I transplanted her from her starter pot day #9. I’ll think on it a little more. Day 26 Update: She has EXCELLENT structure without any LST, Topping, or SuperCropping. Ponytailing has definitely brought out great growth. I’m a little sad. I believe that I’ve misused the total flower time of the 3 autos finishing in this tent. They have all been in flower since week 2 & 3 of their life . They are currently in weeks 7 & 8 of their life. I was thinking an 8 week flower but these look as if they can go 12-15 weeks. Sooo put simply, these autos may remain in my 5x5 the entirety of my 3 month vegging of “Cellie” Cereal Milk by RQS. The best shots will come once the tent gets harvested & she gets scrogged down . I’ve plucked 2 fan leaves finally although I really don’t want to defoliate any yet . Her lateral growth shoots are healthy and tenacious. I’m super happy with the number of arms & equality of height in the arms . I may eventually be interested in topping this naturally bushy plant . I really want a dramatic filling of this tent so I’m encouraging an over abundance of multiple branches. Branches that I will eventually tie down . Day#28 Update: she finished the week well & is becoming voluptuous . Given her majority indication indica leaning pheno is taking up this Gaia Green like a champ & I was questioning just how tall I think she’ll grow before growing/being trained to grow as wide as the tent . She may be a squat but wide bush 😂 . It’s too soon to tell, the lights are still between 40%-50% & watering is only sparingly as needed the last watering age received was day # 24. Give us a like. Week 5 has began !

(wednesday, start week 8) plants both start flowering, the water in the Dwc has only 400 ppm. this plant drinks a lot instead of feeding later on this week: changed water to 650ppm (friday) soil plant looks like its over or underwatered. i used 1/3 perlite and water once a week 1 liter. the pot weighs normal.. maybe i should keep watering everyday half a liter ? the video and pictures of these problems are added to this week, my PH meter was broke causing me to give the wrong Ph for a while.. i now use the liquid ph test kit from GHE, she starts to look better now. ill be happy to finish this i dont like all the leaves on this strain

Clip is from my YouTube channel. Didn’t have many pics of this week, was only filming clips for my grow channel.

The plants are now growing slower in height and start to develop real flower clusters at all tops. Both Barbarian (=AK-47 x Barbara Bud) plants are bushy with lots of budding sites, but plant#2 is now 15 cm taller than plant #1, which is a little more bushy than #2. Both plants are healthy and still enjoy the normal recommended feeding schedule from Advanced Nutrients.

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues

First week of flip 12/12. Pretty uneventful.

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

Not a lot has changed in the 1 week period but they are still alive 😄 so for my 1st im chuffed that I might be chuffing on my own little ladies thanks all

Eccoci qui... Tutto va per il meglio, questa settimana ho eseguito Lollipopping e Defoliation per far si che le cime principali sprigionino al meglio il loro vigore. Siamo verso la fine del progetto ora bisogna solo aspettare la fine... Grazie a tutti per il supporto🔥🌲❤️

Been away for a while just got chance to get back up. Will get some pics later Just started week 9 been on water a couple weeks plenty of nice colours coming through just waiting for a few more ambers on a couple of the plants

D29/V25 - 29/04/23 - Benting D30/V26 - 30/04/23 - EC 0.9 pH 6.5 D31/V27 - 01/05/23 - LST and Benting D32/V28 - 02/05/23 - Some other LST D33/V29 - 03/05/23 - Added water and nutes - EC=0,9 pH=6,5 D34/V30 - 04/05/23 - LST D35/V31 - 05/05/23 - Nothing

Easy grow not a huge yielder but there were circumstances to deal with here so very happy Both plants finished up in the 200 gram range so good grow Get it enjoy it

Hello Diary. It has completed its sixth week of flowering, a total of 9 weeks since Purple Punch sprouted. As you can see in the photos, the plants look beautiful, the flowers are large and hard, full of trichomes. I believe the yield will be better than I had hoped. The smell is very intense. I would also say that Purple Punch is quite resistant, along with them, as you know on "Farm", there is also one plant Watermelon Auto that has suffered a lot due to over-feeding, which cannot be said for Purple Punch. The treatment they receive is the same. Watering is every three days, I regulate or lower the p.H of water to values ​​between 6.1 and 6.5. And I do that with every preparation of water for irrigation. I stopped adding any additives the previous week so they get clean water. Let’s take a look at the review of the week. 26/03/2021 - Day 59. Watering. p.H. water I regulated to 6.4 Temp / Humidity on the farm - 25 degrees and 32% humidity. 29/03/2021 - Day 62. Watering. p.H - 6.3 Temp / Humidity on the farm - 25 degrees and 36% humidity. 30/03/2021 - Day 63. Photography. This time I didn't photograph them on a black background, I didn't want to stress them too much, I'll take detailed photos for the end anyway. That’s it for this week, without much excitement, I’m patiently waiting for the harvest. See you soon.

June 28 - They are doing great, We switched to the recommended amount of nutrients for flowering, Also 2 air stones I ordered have come in so now those are on 24/7 with the nutrient water in a 5 gallon bucket. June 29 - Still just growing away, I am still feeding roughly 3L per plant of nutrient water every 24-36hr depending on how dry they feel. June 30 - Totally forgot to take pictures/videos today. I gave them there daily watering and they are still just growing away. They are in flower now I believe! July 1 - Awesome to see this amount of progression. Tons of hairs and a decently even canopy. There is a small smell coming from in the room! July 2 - Again I forgot to take pictures, But as always they are still just growing away. so far so good! July 3 - Tons of growth and they are starting to become uneven. I don't have a ton of time so I think I will leave them for another week before doing some LST or HST. Tons of colas forming, lots of hairs and they are starting to have a heavier smell! So far so good! July 4 - Same thing as yesterday, still growing away, Ive turned the lights up to 100% now and I have removed the SF-1000 as I needed it for another project! (be sure to check out my other diary's which I will be uploading today!