Everything is about to change for these girlies as I have a new light on arrival to cover the whole tent area. TSW2000 courtesy of my mars hydro sponsors! The lights clearly make a huge difference in growths among others I’ve seen on the market! I’m glad I’m a loyal Martian 😎 👾 👽 I’ll continue as I have until then!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Small defoliation which allowed the plant to develop even better! :)

Last couple weeks for the Green Gelato pair. Getting a couple amber trichs in the video. I accidentally snapped a branch and decided to fully remove it from one, and will add to the total weight at the end. The Royal Gorilla is a strange one. Still far behind at this age, could go 100 days potentially lol. Drinking 2l a day too.

Hey everyone ☺️. After 60 hours, the lady's case was already open :-). Today the seed was placed in soil :-). I only use the soil for cultivation because I have it left and it has to go slowly :-). When repotting, it comes in Canna Coco 👍. I watered the soil with some Canna Rizotonic before the seeds got 1 cm under the soil :-). After that, the pot was placed under a hood in which I sprayed clay every day so that the humidity is between 80-90%. I do this for the first few days until the head looks out of the earth. From this point on, I open the hood at the upper opening bit by bit every few days so that you can slowly get used to 65% humidity before the hood comes down. It is also only poured when the roots are right, until then the earth is sprayed. Which training I will use I will decide spontaneously when the time comes :-). Until then, I wish you all a lot of fun with the update. Let it grow and stay healthy 🙏🏻🍀 You can buy this Strain at : https://www.exoticseed.eu/ Type: Quick Sherbet ☝️🏼 Genetics: 75% Indica / 25% Sativa Sunset Sherbet X Black Lemon 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

D78/F34 - 17/06/23 - I changed light schedule hoping she's going better. (6 only red ligh and 7 red-white) D79/F35 - 18/06/23 - New lights schedule is running D80/F36 - 19/06/23 - Added water and integrators EC 1.0 and pH 6.4 D81/F37 - 20/06/23 - Nothing to report D82/F38 - 21/06/23 - Added water and nutes EC 1.0 and pH 5.7 D83/F39 - 22/06/23 - Temp is too high for both water and environment. I see signals of suffering on the flowers (foxtailing) D84/F40 - 23/06/23 - I'm trying to keep the Tremp under control but isn't easy. To lowering water temp (that now is about 26 °C) I'm adding some ice to the water

Snapped the main branch a little but its been healing ok. Besides that shes been getting bigger filling out her new pot. Also took the smaller lowest branch for my first clone attempt. Probably gonna experiment with a couple more cuttings maybe even an auto clone for laughs. Been raising the light an inch at a time as i noticed signs of light stress. All in all good week happy growing friends

Consider 14 weeks the flowering process itself at when i report i cut it also forced me to do the taste to something too fresh - ? So Consider this a final thoughts post as i wanted to show i slashed them,all at once as i was noticed that were on their limits on time range for a balace between not over ripe the g13 and not let mature enough santa bilbo chamos , it can be very easy to reveal what where each one as they were fuck very stable between them, that uniformity com from very stable bank indeed so fuck i eager to report & fly on some old school shit itself , and shit, this is fuck a sativa and indica differences so clear and by their own simple yet remarcable smell punch from dope lemon demon & sweet og hash ou that are refining from what stated last week & outperforming my own personal previous growof them personal SUCESS & SOPA DE MACACO & BIG GAS LEAKS N BIG DICK ENERGY 👌 . STILL A LOT TO IMPROVE HOMIES & I WILL DERIVE TO OTHER GROW TRY / FAIL / REPEAT & REPORT AF AS I CAN BE FOND OF THIS TIPE OF JOURNAL as on my time, were useful when searching from some previous insight on some grow experiment , or smoke reference as well, every shit can help even and sweet bless of autotranslate as well !

3/4/2023 Week 3- Day 1 of Veg (Day 31 overall) Water Change out Day 36 Gallons in CalMag = .5Mil/Gal = 18Mil FloraMicro = 4.2Mil/Gal = 151Mil FloraGrow = 3.8Mil/Gal = 137Mil FloraBloom = 3.0Mil/Gal = 108Mil PH DOWN = 1.72Mil/Gal = 62Mil PPM = 546 PH = 5.88 This Grow has definitely been an interesting grow I have been playing with Over or Under since the beginning and it all started with me drowning the plants by adding too much water. I will have to make sure I watch that on all my future grows. I prayerful that this week will get me fully back on track, in my previous grows using my chart, I haven't had any issues during this week, so again prayerful that this is the week I am back on point. 3/5/2023 Week 3- Day 2 of Veg (Day 32 overall) ROOT ROT!!! I guess from when I drowned it I caused a lurking issue that really showed it's head today. The roots were looking not slightly bleached but looking black. I cut out what looked dead and I had to run to the local Hydro shop to pick up some items to see if I can fix it and strengthen the plants. I picked up Mammoth Silica, ORCA, and ROOT Drip. I completely drained the system and started it over today as well. 38 Gallons In Mammoth Silica = .5Mil/Gal = 19Mil CalMag= .5Mil/Gal = 19Mil Root Drip = 1Mil/Gal = 38Mil FloraMicro = 4.2Mil/Gal = 160Mil FloraGro = 3.8Mil/Gal = 144Mil FloraBloom = 3.0Mil/Gal = 114Mil Orca = .5Mil/Gal = 19Mil PH Down 60 Mil = PH 5.83 I also had to run by Staples I realized the paper I was using wasn't the right brightness and Lbs for the Photon App. What I needed to have 22Lbs 98 Bright. I recently saw a comparison of the different weight papers against a several hundred dollar Apage PPFD detector and with the right paper it was almost exact readings. With that my PPFD 355. 3/6/2023 Week 3- Day 3 of Veg (Day 33 overall) Still alive!! #2 and #3 are still alive and it looks like no further damage to any of the leaves. #2 needed 1 node topped. I will keep monitoring day to day. 3/7/2023 Week 3- Day 3 of Veg (Day 34 overall) Well Both appear to be doing all right. I cut off the offensive leaves from #3 nothing new on shown on the leaves. I actually needed to top 1 node on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. 3/8/2023 Week 3- Day 4 of Veg (Day 35 overall) Well Both appear to be doing all right. I actually needed to top 1 node on #3 and 2 on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. I think the additives are truly making a difference I think I will be adding them to all my grows from here on out. 3/9/2023 Week 3- Day 5 of Veg (Day 36 overall) Both still appear to be on the mend Still some dark brown on a small part of the roots and I don't know if those are just dead but it doesn't look like it is spreading and I see a bunch of new roots forming. Nothing new on the leaves at all. So I think the trio that I added is helping. The plants also seem to be in raised happy position going towards the light. I still plan to change the water on Saturday and go from there. 3/10/2023 Week 3- Day 6 of Veg (Day 37 overall) Moved the light up to 41 1/2" so 3' 4 1/2" away from the top of the Plants. PPFD= 363 Power on my Light =62.5 Water Temp is holding steady=70.3 PPM= 534 PH= 5.92 Tent Temp= 72.5 Humidity= 50-60% I have 2 humidifiers running on INK Bird controllers monitoring it 24/7. I will be changing out the water tomorrow even though I could let it go an extra week but I am still concerned that the Root Rot is clearing up and I don't want to risk it coming back. I want fresh Nutes/ water in the tanks. I topped 2 nodes on #3 I topped 3 Nodes on #2 I also cleaned out some of the bottom third portion that isn't getting much light and not much growth at all. #2: 8 1/2" tall, 18" Wide #3: 7 1/2" Tall, 15" Wide

All nutes finished up on this girl been flushing since Wednesday so will leave her to dry out for a few days and check back in she’s mostly ready

Welcome to week 7 of flower for this lovely project. Things are moving along and hopefully we will be looking to start flushing soon so we can harvest these beautiful flowers around day 70. I'm very pleased so far with the way things are going for this run looks like I'll be pulling in some big numbers when it's all said and done! Huge shoutouts to @MarsHydroLED and Hidden Vault Genetics for all their work on outstanding gear that make growing a breeze! Huge shout outs to all my followers and people who stop into the diary alike , keep inspiring to grow! -The Projexx Day#43F Pictures N/A. Ladies are grooving along. Still putting on mass and trichomes daily! Day#44F Some of the plants are starting to throw some colour around now. Won't be long tell we're looking to flush I'm sure. Day#45F Some of the ladies are starting to slow down now while other push on gaining mass daily. Day#46F Pictures N/A. Lowered temps in room, increased water to some of the plants while decreasing some for others. Day#47F Pictures N/A. Ladies seem to be enjoying the temp decrease. Most plants are still gaining mass. Day#48F Pictures N/A. Creamy Cereal #1 starting to fade. I will be looking at the trichomes of all the plants in the coming days! Day#49F Macmelonz and Banana Smoothie #1 are still going strong putting on mass daily these ladies will be closer to 80 day finish I willing to be. Recap: Things are going good , with some plants showing signs of slowing down on mass its time to start checking trichomes to see if we can begin the flush period. I will be looking at the trichomes in the next couple of days to see where things are at on an overall level. The more time passes the more excited I am for the race to the finish line!

I'm extremely happy with how she's turning out, I want to give her another week, ideally 2.

An diesem Grow will ich beobachten, was schlussendlich die bessere Methode ist (TOPPING , VS FIMMING) Alle 4 Pflanzen sind gut in die 3 Woche gekommen. 2 Pflanzen sind ein wenig kleiner geraten als die anderen beiden, deshalb habe ich die zwei kleineren Pflanzen in zwei 11 L Töpfe gepflanzt wo sie bis zum Ende bleiben. SONNTAG: Heute wurden die beiden größeren Ladys gefimmt, die zwei kleineren wurden getoppt. Eine von den größeren Ladys habe ein bisschen mehr gewellt. Die habe ich einwenig entlaubt da ich nach der zweiwöchigen Pause mit LST weiter machen will. Ich bin voller Hoffnung das alle meine Babys das Training heile überstehen, drückt die Daumen.😁 MONTAG:

Best flower 🔝 Strong flower. I love qualitty of HSO. everyone recommend This strain. 💚 Thank for watch. ✌️🏼🔝🔝🔝

✌️🎃 Thank you for checking my cultivation. 🍔 Fatten time.

Entramos en la 9 semana y seguimos con heladas en el exterior , las mínimas con luces apagadas son de 15º y las máximas con luces encendidas

5 week Blooming

Day 84-91 (Day 3F-10F) (Day 6F) I’m giving a final foliar spray of Velokelp tonight before I start to see buds develop. Forgot to water today as I didn’t have any RO and bbb#1 was slumped and droopy. I decided to just water everything with tap water. I’ve been doing quite a bit of research on using city tap water with organics and it shouldn’t disturb the microbiology very much at all. And it will actually help smokability and ash color because of the extra CaCO3 in it. The higher 7.8 pH will also lockout heavy metals like aluminum as well. (Day 7F) Plants look just fine and the pH fluctuation didn’t make any difference at all. I’m going to discontinue the use of RO water for the rest of my run and all subsequent runs. (Day 8F) I’m defoliating small amounts of leaves and sucker branches but this thing is out of control. Every 12-18 hours I see noticeable growth. I want to do a heavy strip around day 21. Starting to see budlets and pistil clumps form! These plants don’t seem like huge stretchers but I’m still anticipating quite a jump in the next few weeks. (Day 10F) Everything is looking just perfect. I’m surprised how fast these 10 gallon pots are drying out now. They go from soaked to light and airy within a few days. Hopefully I can make it the next 2 weeks without seeing any N or Mg deficiencies.

✌️🎃 Thank you for checking my cultivation. 💚🧟‍♀️ My little monster.

Top any thing to even out canopy at this point