The last week of vegetative state. Some of those are pretty dense, they look like salad. Maybe adding a bit of blue to this 80 CRI LED is a good idea to get a bit more elongation. Work a lot on LST tonight. I'm trying to make some clone with a technique I've seen long time ago. I put the cube directly on the plant. I remove the skin surface of the branch before putting the rockwool cube around . All cube are wrap in plastic to avoid excessive drying. No hormones. I will wait one week before cutting those clone out of the plant( thats my dead line before flowering). They all receive 200ml of PH 6.5 water this morninig and 200 more this afternoon. Next watering in the morning tomorrow, Working on ESP32 wifi based co2 meter for controling co2 level in the next grow. =============== 2020-05-26 =============== Everybody receive 300ml of ajusted 6.5 water. Adjusting LST and adding some defoliation. Watering clone/cube with 5.5 ajusted water with blunt top a seringue. ========= 2020-05-27 ========= Trying to water 3X day the clone/cube with 5.5 ajusted water with blunt top a seringue Everybody have received 125ml in the morning. Worked on the low cost wifi Surge protector 6 space smartbar. 15AMP@120v https://mygeeni.com/products/geeni-gn-sw003-199-surge-smart-protector-white/ Found a way to get rig of the cheap stock firmware. Flash it with a alternative firmware(tasmota) using wifi/without any opening/soldering. Those are pettry nice , timer capable, you can remotly control and monitor them After setup you can acces the bar using the small web interface or via a MQTT server and home automation software. I've posted a image of the result for those 2 examples. So im thinking to turn this into a tutotial to help grower to acces flexible technology and software at resonable price. You can comment to signify your interest in this! =================== 05-29 ================== Everybody back on water until monday/switch to flowering. Added some tutor for the next stage. Moved the cam for top view I cleanup/defoliate the bottom of each plant.

I've finally got the drip system up and running, perfect time too because they are definitely drinking more. They are getting fed 4 times a day at 1 minute increments which comes out to about 100 ml per feeding. The plants have really started to take off, roots are coming out of the bottom of the cubes. I just topped all of them so they'll start branching out more. I'm currently running a 600w MH and am starting to deal with heat. 2 weeks ago I ordered a ChilLED Growcraft 600w LED light, I can't wait for it to show up so the heat will drop and I can get back on track with the proper VPD. I also just recently ordered Mammoth P microbes and some silica. Hop you all are enjoying the grow so far.

Hello everyone, These girls are still flowering!!! Been giving them water thinking they would finish soon. Let's see what happens this week See you guys next week 🤘🤘🤙🤙👊👊👊

Hello everyone, These girls are still flowering!!! Been giving them water thinking they would finish soon. Let's see what happens this week See you guys next week 🤘🤘🤙🤙👊👊👊

Hello everyone, These girls are still flowering!!! Been giving them water thinking they would finish soon. Let's see what happens this week See you guys next week 🤘🤘🤙🤙👊👊👊

Week 2 Day 8

End of Week 2 05/01/2020 They are growing well. Sweet Tooth #2 slowly beginning with LST. Continued... Nutrients: 2ml fishmix and 2 ml bio heaven per 1l. Now 400ml/plant per day and they get a shower a day ;-) Lightpower: 20/4 Now you get full spectrum about 330watt (2xGC4 + 1xBAR). Bloom lights for the corners, vertically, I will assemble next week. Climate control: In the box it's a tropical 27-28 degrees during the day. The relative humidity is approx. 68-70% I water in the morning and use a humidifier, I also add a bowl of water with Co2 tabs.

Esta fue una de mi primer cosecha con éxito, esperaba una mayor producción, y mejores efectos y sabor, pero para ser la primera ves esta muy bien 👏🏻 aún me quedan un par de semillas, la próxima ves espero crecerla mejor.

Esta fue una de mi primer cosecha con éxito, esperaba una mayor producción, y mejores efectos y sabor, pero para ser la primera ves esta muy bien 👏🏻 aún me quedan un par de semillas, la próxima ves espero crecerla mejor.

Esta fue una de mi primer cosecha con éxito, esperaba una mayor producción, y mejores efectos y sabor, pero para ser la primera ves esta muy bien 👏🏻 aún me quedan un par de semillas, la próxima ves espero crecerla mejor.

End of week 8 of flower She is starting to yellow up through flushing Hopefully be harvesting a week from today

5/25: It rained again today for most of the day, but I managed to get back out there and take some photos after it let up. I also shot a short video early in the a.m while it was sprinkling and the lights were on... I heard that this strain flowers really fast, but I really don't think she can finish before June 21 (the summer solstice). The other two seedlings (FFT#6 and FFT#7) are in the same boat. The 5 clones outdoors might be able to finish before they get the signal to reveg. I may end up bringing as many of them as I can fit into my closet to finish and starting another batch of beans to grow outdoors this summer... 5/26 - 5/31: I did some training on her early in the week between rain showers, and foliar fed with Microlife maximum bloom formula. She's more than 36" across now... She was looking a little N deficient, so I assume the dry amendments have petered out. I top-fed her with another couple tablespoons of cavern culture and on the 31st, they were dry enough to feed them. I gave them big bloom, tiger bloom, grow big, beastie bloomz, silica, endoboost, signal, humic acid, liquid kelp/fish emulsion, and liquid molasses. It just feels so strange that I'll be harvesting outdoor photos in June!?! That's it for week 8-

Esta fue una de mi primer cosecha con éxito, esperaba una mayor producción, y mejores efectos y sabor, pero para ser la primera ves esta muy bien 👏🏻 aún me quedan un par de semillas, la próxima ves espero crecerla mejor.

Esta fue una de mi primer cosecha con éxito, esperaba una mayor producción, y mejores efectos y sabor, pero para ser la primera ves esta muy bien 👏🏻 aún me quedan un par de semillas, la próxima ves espero crecerla mejor.

5/25: It rained again today for most of the day, but I managed to get back out there and take some photos after it let up. I also shot a short video early in the a.m while it was sprinkling and the lights were on... I heard that this strain flowers really fast, but I really don't think she can finish before June 21 (the summer solstice). The other two seedlings (FFT#5 and FFT#6) are in the same boat. The 5 clones outdoors might be able to finish before they get the signal to reveg. I may end up bringing as many of them as I can fit into my closet to finish and starting another batch of beans to grow outdoors this summer... 5/26 - 5/31: I did some training on her early in the week between rain showers, and foliar fed with Microlife maximum bloom formula. She was looking a little N deficient, so I assume the dry amendments have petered out. I top-fed her with another couple tablespoons of cavern culture and on the 31st, they were dry enough to feed them. I gave them big bloom, tiger bloom, grow big, beastie bloomz, silica, endoboost, signal, humic acid, liquid kelp/fish emulsion, and liquid molasses. It just feels so strange that I'll be harvesting outdoor photos in June!?! That's it for week 8-

I topped her this week and she became very bushy within two days. I also changed her into a 10 gallon grow bag and she is loving it. I have increased nutrients this week as I noticed a slight bit of leaf curl due to too much nitrogen so washed roots down a bit a diluted nutes slightly and she came around pretty quickly! Growing quickly

I topped her this week and she became very bushy within two days. I also changed her into a 10 gallon grow bag and she is loving it! Growing quickly she seems to love all the nutrients she can get !