Had no time for them through the last week but they are still alive and growing massive heads 🥦🥦🥦

Eccoci qui... Per problemi di lavoro ho tardato un pò la pubblicazione delle foto... Il ciclo si presenta molto bene siamo quasi nella fase finale ma comunque bisogna prestare molte attenzioni, sono molto entusiasta di questo cultivo. Grazie a tutti per il supporto, NON VEDO L'ORA DI RACCOGLIERE 🔥🌲❤️

Hello everyone, This week I added some calmag because i spotted deficiency on my indicas( Critical kush), Not a big deal but since i only make one bucket for all the plants instead of 2 seperate ones, my indica's had a little bit to less. Indicas like to have more nutrients then sativa's. Did some LST again, removed some leafs that shadow my new branches(nodes) and yes the plant that i don't want to keep is still here lol. Trying to ask people if they want a plant for free because its just sad to throw it away. If it doesn't get a new home in the comming weeks, i have to throw it away. The way i did LST is slightly different most of the times growers like to get rid of alot of leafs, only to have the node leafs intact, i have done this a lot of times as well but this time since it is just a fun outside grow, i kept most of the leafs, just to see which LTS way is better. Yes keeping the leafs cost some energry, these leafs will grow unnecessary but in the other hand they will catch up alot of sunlight which is also needed. I also kept 4 main branches. Most people grow 2 branches and create side branches on them which is more common to do or just let the plant grow normaly, LST her and when she gets like 6-9 main branches, to top her. I already have the feeling that the two other options are better to do but hey we are not done yet. Sometimes i really wanted to cut off all the lower main branches and had to say to myself that if i would do that, it would be just another normal grow. or just get rid off al the nodes and just only grow those 4 main branches, but 4 branches would had been a little to less yield later on. But in return all thoose side branches will take alot of energy/nutrients too which can result into smaller and less compacter buds. In the other hand 4 main branches would not be a bad idea for outside grow in my country, we have bad weather here and not that much of sunlight the plant will have less energy needed to fully complete the colas and will get bigger instead of having many branches hmmmm.... I Anyway, I would never do these experiments with inside grows with alot of plants, it would be painfull and cost alot if it doesn't get good results. So i would advice to anyone only experiment if you don't care about the results. We will see :) I hope you enjoyed watching this week.

Scrog installed and the ladies are growing closer to it everyday. One of the pink kush are growing very well and i Hope it have the qualities in flower that im Looking for. Very pleased so far 🙂

14/05 elle démarre bien, peut-être un peu basse de la feuille.😁

Hey guys, The things I did in this week. Shamans: - 6th week of flowering - PH 6.3-6.4 - EC 1.7 As you can see I did a mayor defoliation on the Shamans, this was necessary because this week and in the comming weeks there was/will be many rainy days. Therefore the risk of bud rot increases when having alot of leaves and not a propher airflow. I switched spots between the two shamans and turned them 180 degrees so I won't get undeveloped buds on the other sides of the plants. Done this many times before but forgot to mention. Lollipopped them and got rid of some weaker branches. Critical Kushes: - 2th week of flowering - PH 6.3-6.4 - EC 1.3-1.5 - Lollipopping - Minor defoliation All the plants had been sprayed with Canna Cure.

Harvest: Everything dried up to 347 grams + 96 grams of super high quality trim. Overall I am not too pleased with the smoke of the product. Although the bud size, bag appeal, smell and taste are pretty much all there, the shitty burn is a deal breaker for me and the majority of this weed is quite frankly useless. Another downside is while smoking I’ve found 4 seeds in an ounce from almost every strain. Light leaks? At least I learned a ton, including how to get super good burn for my next crop. I’m hoping that curing for a month or so will improve the burn but I wouldn’t really count on it. I have seen weed dried for 4 days with no cure and no flush smoke clean and not go out once. I have been told that the key to white ashes/clean burn is proper mineral content in the soil and there is tons of scientific studies on cigar ash going back 100 years. Plants grown in a medium with high levels of decomposing organic matter, phosphorus, magnesium, chlorine and heavy metal ratio tend to produce black/grey ash. Whereas plants grown in a medium with a higher ratio of trace minerals like calcium carbonate and potassium in the form of wood ash, rock dusts, oyster shell flour and lower levels of decomposing organic matter will produce a dense, uniform white ash that rarely goes out. But this is still all theory until I test it to confirm for myself a few times. My last few outdoor harvests did not improve with curing at all so I’m hoping this will be the missing link. Plain peat moss and coco clearly lack essential minerals that help burn. If said theory is correct I should find a synthetic nutrient line with more trace minerals. Makes me wonder if growing if rockwool/basalt rock could improve burn in a hydro setup. I think I did a fairly decent job for my first grow. I went wrong in a million different places but I still stuck it out and got some decent herb. Things went wrong early when I got black spot mold, nitrogen/magnesium deficiencies and powdery mildew. I corrected most of it but things didn’t get really bad until mid veg when I intentionally skipped a few feedings and defoliated quite heavily stunting the plants. I also didn’t even top or start LST until the 6-9th node which was really stupid and hurt my yield. My temperatures were all over the place from the learning curve. I was severely overwatering without realizing it. 100% peat moss is a shitty medium. I also fed way too late in flower (not what caused shitty burn). I also used synthetic nutrients in soil. Zkittlez bonsai Yield: 1.9g Smell: 7/10 - sweet, candy, berry, gassy, piney hints Bag appeal: 7/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent, needs curing High: 6/10 - indica dom Comment: looks nice, smells nice, tastes nice, burns like shit. 43.5/70 = 62% 👎🗑️ Black Garlic #1 Yield: 53.6 Smell: 8/10 - gassy, piney, earthy, skunky Bag appeal: 7/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 8/10 - thick, uniform white ash Fire holding: 7.510 - stays lit for 45+ sec Smoke: 7.5/10 - taste is good until the end High: 7/10 - sativa dom Comment: looks nice, smells nice, tastes nice, burns great but quite leafy. 52.5/70 = 75% 👍🔥 Black Garlic #2 Yield: 42.3 Smell: 7/10 - woody, earthy, tea Bag appeal: 6.5/10 - slightly leafy/stemy Crystal coverage: 7/10 - impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent, needs curing High: 8/10 - sativa dom Comment: looks nice, smells nice, tastes nice, burns like shit. 44.5/70 = 63% 👎🗑️ Zkittlez Yield: 39.4 Smell: 7/10 - sweet, candy, berry, gassy, piney hints Bag appeal: 6.5/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 8/10 - thick, uniform white ashes Fire holding: 8/10 - stays lit for seconds Smoke: 7.5/10 - taste is decent, needs curing High: 7/10 - indica dom Comment: looks nice, smells nice, tastes nice, burns great but smalls didn’t fill out. 51.5/70 = 73% 👍🔥 Blackberry Breath #1 Yield: 57.5 Smell: 9/10 - sweet, grape, berry, gassy, earthy, hashy Bag appeal: 8.5/10 - dense, sparkly buds Crystal coverage: 9/10 - super impressed Ash: 5/10 - flaky, mostly grey/blackish Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 5/10 - tastes like chalky shit High: 6/10 - indica dom Comment: looks amazing, smells amazing, tastes like shit, burns like shit. 46.5/70 = 66% 👎🗑️ Blackberry Breath #2 Yield: 76.1g Smell: 6/10 - musky, tea, berry, herbal Bag appeal: 8/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 5/10 - flaky, mostly grey/black Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 5/10 - taste is shit High: 6/10 - indica dom Comment: looks nice, smells shitty, tastes shitty, burns like shit. 41.5/70 = 59% 👎🗑️ Slurricane #4 Yield: 34.5g Smell: 8.5/10 - gassy, deep piney, fuel, earthy, Bag appeal: 8.510 - slightly leafy/stemy Crystal coverage: 7.510 - impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent High: 6/10 - indica dom Comment: looks amazing, smells amazing, tastes nice, burns like shit. 46.5/70 = 66% 👎🗑️ Badazz OG Cheese Yield: 43.5g Smell: 6.5/10 - musty, woody, cheesy, piney hints Bag appeal: 6/10 - slightly leafy/stemy Crystal coverage: 6/10 - very impressed Ash: 5/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent High: 6/10 - sativa dom Comment: looks like shit, smells decent, tastes decent, burns like shit. 39.5/70 = 56% 👎🗑️

12/12 + 28 jours Mon 1er Schwazzing !!! Photos et vidéos avant et après la defoliation 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 70% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 4x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 80% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan Sponsorisé par Mars Hydro

Hi! This is my first attempt at growing. I've had house plants for years and have cruised the reddit forums. Fingers crossed my green thumb stays consistent. I ended up germinating two ways with these Auto Shark seeds bred by Pyramid Seeds bought from Seedsman. One using the paper towel method and the other using a jiffy pod in a to-go container. To my surprise the impromptu jiffy pod sprouted in two days, whereas the PT method was a dud. The attached photos were taken today (day 6) since sprouting and transferring directly into a 3 gal fabric pot. I fed her two days ago and the soil is still running moist. I'm using a combo of Happy frog with extra perlite with organic earthworm castings. The flowering time for this seed claims six weeks so I'm curious to seed how this goes. I won an Emerald Harvest nutrient kit so I was planning to give her a third of the recommended dosage from their manual on the third watering. (Only watered once so far.) Humidity has jumped between 50 -80% over the course of the first week. I'm still getting used to my the spacebucket I've been constructing over the past few weeks. Which materials are as follows: -Growstar UFO LED 150W -LEDMO 5630 LED Strip, Daylight -120mm USB Fan (Outtake) -120mm High Speed Muffin Fan (Intake)(Had to buy fan controller for it cuz it was so loud/strong) -NAVADEAL Silver Reflective Mylar Film -(5) 5 gallon home depot buckets I bought a soil ph reader but I think its busted. I've bought a few gallons of grocery store water until I can get a ph reader and am just crossing my fingers the plant will be okay.

As of day 25 things are going well. As I point out in the video, I had a mishap while tieing down the left stem of the mainline. It snapped most of the way through. I left it alone for a few days and then carefully trained her back down. She seems fine, maybe a little bit stunted but not bad. The wounded area is thickening up nicely. She has a very faint smell, but is is the piney aroma of northern lights. Update: Mid-week I discovered that I was underwatering, causing slow growth, and possibly nutrient deficiencies. This may be the cause of the brown tips and edges on the largest leaves. Hopefully I have it fixed from here on out. At least I know to be aware of it. I'm new to fabric pots and they dry out way faster than plastic or even ceramic.

Flower Week 6

She started out stretching vertically faster than any strain I’ve grown before, and after laying her out for LST I thought she’d continue that stretch... she did to a certain degree, but more than half the canopy did not make it to the top. Next time I think I’ll top her instead, but regardless she has put out some picture perfect, sticky, pungent buds. A must have strain.

Week 6! Day 44: 2L (PH6.3) + half-dose 4-1.5-4 + 1ml/L CalMag Today. I learned that with half strength Bloom Feed and a dose of CalMag Pro, the PH of the solution ends up at exactly 6.3 - this means that most of my watering of last grow was too acidic because I often still added PH- Nonetheless, while checking up on the NLA I noticed her symptoms progressing and I did what any self respecting grower would do: remove the evidence. Coincidentally, I've removed most of the damaged leaves to make checking up on her easier and to more easily figure out whether she's improving or deteriorating. Additional thoughts: While inspecting the pictures again, I noticed that perhaps some of the damage might be a pointer towards the phosphorus toxicity theory, caused by the premature PK13-14 feed, and the additional feed of last week. That said, perhaps it's a convenience that the Pokon bloom feed does not contain that much phosphorus relatively - and since it's an organic nutrient it will not immediately raise phosphorus levels even higher. Hence, this week will mostly be focused on monitoring her symptoms, while the buds are steadily thickening up. Day 46: Moist, no water. Her symptoms are progressing, I noticed that some of the leaves have a tighter gradient from green at the stem, to yellow about half way the leaf. What this means? I have no idea, I'd like to think it's a response to the fresh supply of Nitrogen from the bloom feed. However, it's just as likely that this tighter gradient went unnoticed until now. She's got some pretty rough nute burn, so I think the best course of action is to stop feeding her entirely for now. I'm quite certain that, with the PK13-14 and the organic bloom feed, she'll have enough nutrients for the coming period. Buds are thickening up nicely though. Her terpenes are starting to develop and I can see more and more trichomes appearing. Day 48: 2L (6.3PH) Her symptoms progressed even further, I'm not worried though. I removed more leaves from the lower, shaded area.

Great week. Really starting to take off in growth. Onto full strength nutrients and going full power on the lights now :p Going to start my LST soon possibly this week or early next week. Will add more pictures and edit as the week goes :)

I've been a bit confused about the age of my clones but I reached out to suppliers and got more details. Clones were cut on September 20, I transplanted on October 25 when I received. I'm thinking I should flip to flower end of November. Lots of bud sites after lst and bushy.. a bit short in my eyes but I know will stretch once in florer

Firstly we've place the seeds in water for 72 hours. Then place in Jiffy pods, then placed in a mini hothouse under 2x 28watt halogen bulbs until day 14. Then they'll be placed in large 16-20 litre pot, then placed in the greenhouse to live out their life. Day 2. Gelato Auto have been planted in the jiffy pod. Day 3. Auto Ultimate and Gorilla Glue Auto have been planted in the Jiffy pods. Day 4. Halogen lights too hot, so now they are in the bathroom under one of the ceiling heat light. It's perfect, the humidity ranges around 78 - 83% and the temperature ranges between 18.2 to 21.8 degrees over the 24 hr period Day 6. The Gelato Auto has sprouted along with 6/7 Auto Ultimate. Leaving one more to come plus the Auto Gorilla Glue. Auto Gorilla glue and Auto Gelato were free seeds with the Auto Ultimate. So they'll becoming along for the ride. Day 7. All of the Auto Ultimate have sprouted, leaving just the Gorilla Glue Auto to come. It's has a tap root, it just hasn't escaped from the seed yet Day 9. 5 Auto Ultimate have been planted into 16 litre buckets and placed under 200watt HPS bulb 18/6. The rest will be planted on day 11. Day 10. Gorilla Glue is gone. When you see a seed case that won't fully open with a very small tap root. It's either delicately remove the case and membrane and hope it'll do something. If you break it, waste of time. If you don't, waste of nutrients and soil on a maybe so opted to say good bye. It's a free seed so no loss. Plant the Auto Gelato and the two Auto Ultimate tomorrow morning. Day 11. 2 Auto Ultimate and the Gelato Auto have been planted outside in the hot house. The other 5 will join in week three of growth. It's said to grow then under lights for the first three weeks. So we will the difference between starting outdoor and starting indoor. This is my comparison Grow. Day 12. Hot house has built-in misting system to help with it humidity levels. I do a feed once a week with fish fertilizer. Soil mixed with dynamic lifter & slow release fertilizer pellets. Mist will go off at 9am, 2 pm and 930pm. More often or less weather permitting. Hot house open during the day and closed in the afternoon and throughout the night. All is doing well in the hothouse. The 5 Auto Ultimate indoors are doing great as well. So far so good. Day 14. Germination period has ended. We only lost the Gorilla Glue Auto. When the 5 indoor ones reach three weeks they will join the others outside, to complete. MH light now set at 400watt

📆 Week 10, 23-29 June 2024 23-29 June - Observed and let the plant grow. 📑 Trichomes and resins have developed rapidly and the smell has became intense. All appears well and on schedule for this girl, another 2 weeks of flowering/flush and she will be matured. 🍶 24, 27 June nutrient solution changed 🍽️ 24, 27 June feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient solution EC 1.8 at 75 degrees F 🔆 Light power at 50%, DLI 40 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this week. Thanks for the look, read and stopping by.