Likes
48
Share
@Hashy
Follow
Day 98 and its the end of the grow. 1st I'm going say thanks to @fastbuds for the seeds, very much appreciated. This week I flushed until my EC was close to my waters EC which took 4 days. On day 97 I gave all 4 the chop. So they been drying for 24hr so far, i haven't done any trimming yet just left them with plenty of leaves on, hopefully they should take a week to dry, I'll prob do some trimming during that period. The only plant that could have done with some more time in tent was the lemon pie, maybe she needed another 5 days or so to finish swelling up. As far as the grow went it wasn't bad, hit some problems, mainly temps outside being so damn cold near the beginning that I was struggling getting temps up. Also I cut out using hydroguard to early and the roots started to suffer. I'll put harvests of all 4 plants when they have been dried and cured for a least a week most likely 2. Hopefully by then I'll have got my jobs needed doing on the house and can start all over again, not sure what seeds I'm going to get yet, if anyone has any autoflower recommendations shout them out. Max 24.2 deg Avg 21.4 deg Min 17.1 deg Max 55% Avg 47% Min 37%
Likes
120
Share
Went to daily water this week and gave her Royal Rush. I will once a week now till almost flush. Tracking the moisture curve with Ecowitt in coco is working just fine. Can see the cycle getting little by little shorter. Exciting! The timelapse is most of the week? I think. Idk its this week though. I may have knocked it over and moved the plant. But it is what it is. Just playin around anyways. 😁 Back to plant, I was going to top her. But clearly I did not. I may bend her tomorrow, well see. She is eating little, she stacks at 325 ppm but not much. Oh and some ca dots arrived, but its old. Should be flower any time! 😁😻🤘.
Processing
Likes
7
Share
@Adam420
Follow
Finally showing her pink pistils in all areas. Week 2 in full effect. Grew a couple inches and looks to have grown her last shoots on her tops. Love this plant
Processing
Likes
2
Share
Hola familia, siento la ausencia estos últimos 8 días, pero estoy de vuelta, estás misty gorilla auto de Zambezaseeds, están fenómeno, ya empiezan a desprender aromas, y eso es agradable, espero que engorden más estas flores por lo demás va bien, entonces la temperatura la mantenemos por debajo de 26 la humedad por debajo del 40% , sigo alimentando las con Agrobeta, por supuesto, os voy adelantando que va a ver muchos cambios cara al futuro y para bien, os iré diciendo poco a poco. Un saludo fumetillas y buenos humos.
Likes
18
Share
Likes
9
Share
Likes
7
Share
@Salokin
Follow
Yesterday she was cut, run off ppms had been at zero for at least 4 days. For what this plant went through in terms of heat and humidity, I believe the outcome of roughly a kg wet is not too bad. Bud have a certain density to them but far away from what I prefer. However the presents of an abundance of Reepes is undeniable. ATM she smells very sweet with a hint of Creme and a bit of pine. She must be quite mold resistant, as the other plant in the tent with her was quite mold riddled and the Afghan didn’t catch anything in that tiny growspace.
Likes
9
Share
@papexa
Follow
all was ok in this stage, using an automatic temperature regulator made by myself
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
6
Share
This one was In-Z-Air by PerfectTreeSeeds, grown with GreenPlanetNutrients only! Check the other weeks to see the ones with AptusPlantTech! Great zkittles terpz, awesome structure, beautiful colours!
Processing
Likes
66
Share
What a week, So I did a run off test end of last week and they was really high, but I would like to address the DNA Mills cork as I am using this in just one pot (A) to try it out I used 3/4 (B) to my normal coco in another pot 50:50 (C) in another at a 1/4 (D) then when just my normal coco mix ( E) and I havent seen much difference other then the retention of water... UNTILL NOW. So evaluating all my reading I have from run off this is how it WAS sitting running water with an EC 0.7 Ms/cm A - 2.4 Ms/cm B - 2.3 Ms/cm C - 2.0 Ms/cm D - 1.9 Ms/cm E - 1.5 Ms/cm So my conclusion is that I dont like the cork maybe I'm using it wrong somehow I dont know but in my experience, it seems to be grabbing hold of all the salts and not letting go, so this week I ran litres and litres of water through them to bring them down I can only get A down to 1.4 Ms/cm and am struggling to get it any further down does anyone have any suggestions. As for the deficiency I was supposed to I produce the PK booster beginning of this week and couldn't with the run off being so high, well that's what I'm hoping anyways 😂. Plant A doesn't seem to be swelling like the rest (front left in pictures) I'm hoping this is down to genetics if anyone else has any thought I'd love to hear them. Thanks for dropping in and reading, Happy Growing! 👊👍
Likes
4
Share
Got the guy separated and hopefully the other three are female so I can still flower two of them. Will be doing small pheno hunts with this strain in the future so ill be needing the seeds.
Likes
12
Share
@GrowGuy97
Follow
Sorry for the lack of updating recently I have a new job & don’t have much time for anything but I just wanted to show how amazing these ladies are doing! Both Strains smell unbelievable & by far some of the frostiest plants I have grown, have taken to fox farm nutrients very & they have not really gave me any issues the entire grow! Will post some more updates around harvest time thanks for following friends!🙏🏼🙏🏼 Happy growing🌱🌱
Likes
34
Share
Stopped feeding this week other than one watering with molasses. Needing to be watered every 3 days. Other wateringsu using ph'ed filtered water set on my air bubbler for a few hours before watering. Bud height is tapering off but this plants buds are getting very plump and dense. They are much larger than I expected for the number of tops i have. The canopy depth is also very good and should amount to a great yield. Very happy with the frostiness and odor. She is going to be very potent. Looking like it will be on the easier aide to trim as well. No real signs of fading yet but most of the hairs are orange and not seeing many new white ones. Trichomes still look like they are developing but getting very close.
Processing
Likes
25
Share
@EveryGrow
Follow
Hey guys and girls :) Week 4 little update. These girls could be boys and also, I am pretty sure these are not automatic :) They take a long time to develop and grow. You can also see they developed some insufficiency, the leaves don't look god. Do you guys know what is this and can it be solved with natural solutions? I will not add any nutrients. I mean will not add anything they sale as nutes. Any "gandma's" remedy guys? Feel free to advise! Thanks for watching and will update next week!
Likes
12
Share
@K8420
Follow
Noticed some Mg deficiency on plant 1. Just started creeping in. Haven't seen any signs on plant 2 but I fed them both some epsom salts just in case. Other than that, the girls are doing well. Growing very bushy though, will do some experimenting with the light intensity to try to get them to stretch a bit.
Likes
22
Share
@Njaak
Follow
Switched to flowering this week (Nov. 1) and of course drained, cleaned and refilled the reservoir buckets with the flowering nutrient solution. Cleaning this week indicated more growth on the interior surfaces than normal so I also did a full H2O2 (3%) clean, with a good rinse afterwards. Also ran the air stone in a cleaning cycle for a few minutes. You can see that the discoloration from last week is gone, thankfully. Keeping the pH in check though I did let it slip with a few days in between readings there. Thankfully no substantial effect. I'm not sure I love the overall geometry of the plant... but it's healthy and has a decent number of colas forming so that's all that counts. Compared to the chilled and recirculated water system I used last time around, this is MUCH easier. My reservoir temps are a bit higher than I'd like but the Hydroguard is doing it's job and no issues so far. Fingers crossed it stays this way. Thanks for reading growmieverse.
Likes
5
Share
@Godsgrace
Follow
💫The week went great. After the first stress, growth seemed to slow down, but it worked out, the plant began to expand. I water it every 3 days. I continue to bend the stem along the axis of the pot. I bend the branch that will pass through the fastest. 💚I started giving supplements late. Only on the 33rd day I gave him fish and everything else. 🍀 Week showed good growth, but it could have been better, let's see what happens with the additives. I continue to twist the stem in a circle (I don't know where to twist it). And I also cut off the leaves a little bit, about once a week, as they block the light (a friend says not to overdo it with defoliation, let's see what happens).🍀
Likes
1
Share
•Terza settimana• Eccoci arrivati nella terza settimana signori, durante i primi due giorni 1 pianta su 4 ha subito il processo del “topping” (come da foto) Abbiamo rimosso la crescita dell’apicale centrale permettendo lo sviluppo della pianta più in grandezza che in altezza, con una speranza di resa migliore. Mantenendo sempre accurati i valori principali per la crescita (irrigazione, temperatura e umidità) le piante crescono in ottima salute. (PH ancora alto, ci accorgeremo solo tra una settimana. È essenziale mantenerlo sempre a 6.5 fin dal giorno uno.)