The Grow Awards 2026 🏆
Likes
Comments
Share
A-Day 60, B&C Day 56 A is fattening up! She never did stretch, but then again I had her tied and splayed pretty far out. She has been thirsty, I have been feeding a dose close to 1000 ppm every other feed which has been every other day for her. During the lower feeds, ppm has been around 400. Her tricomes are mostly clear, with some cloudy starting to show. She still has a couple of weeks to go. B- is going to be a producer! She has so many tips and they are all fattening and developing at about the same rate, she is going to be a beast! Did a defoliation on her, she is appreciating the extra light penetration 😎💨 C- Has stretched up and out! If she stacks as tight as the other two, she will probably be the one with the most weight. Her branches are the tallest and reaching up at least 4-6 inches past both her sisters. I tied her down lightly to allow light to get through, we’ll see how she goes.
Likes
21
Share
@Hashy
Follow
I got back near the start of this week and had a mess to clean up. All my fault as I forgot to turn the waste pump timer on at the wall. The grow has done OK really considering its been left to timers to control it. I'm going to invest in some that I can control remotely as there was one feed I could have done without this time. The AK47 has come on quite a lot this week. A few issues that I'm not worried about. This is looking like she is going to be a week or two longer then most the other strains in the grow. But is looking promising. Day 57 Saturday 29/10/22 ****Away**** Feed=autofeed 2.5hrs Est Volume= 17L, Ec= , PH= Est Left= 10.5L, Used= 6.5L = 1L each Est total used=19.5L Est total each=3.25L Est total Runoff= 1.2L, Ec= , PH= Est total run each= 0.2L Day 58 Sunday 30/10/22 Actual volume left= 6L ec1.66 ph 6.7 Used 24L =4.5L more then expected. Actual runoff= 4.2L Ec2.45 ph 5.4 Runoff 3L more then expected. Each got 4L =0.75L more then expected Each Runoff =0.5L runoff Big mess as i forgot to turn waste pump on at the wall for the timer to work. Clean up. Big defoliation on all. Day 59 Monday 31/10/22 Day 60 Tuesday 1/11/22 Feed=autofeed water 3.5hrs Volume= 10L, Ec=0.25, PH=6.8 Left= 1L, Used= 9L = 1.5L each Runoff= 0.5L, Ec=3.33, PH=5.9 #1 H=60CM, D=42CM, DLI=33.9, PPFD=471 Day 61 Wednesday 2/11/22 Day 62 Thursday 3/11/22 Day 63 Friday 4/11/22 Feed=autofeed 3hrs Volume= 12L, Ec=1.34, PH=6.5 Left= 3L, Used= 9L = 1.5L each Runoff= 1.1L, Ec=2.93, PH=5.9 #1 H=60CM, D=42CM, DLI=33.7, PPFD=468 Viparspectra xs2000 65% power 7 days £0.30 /Kwh = £6.55 for the week. Thanks for stopping by. Take it easy.
Likes
3
Share
The Buds are getting Frosty and heavy. The Fruity smell turned into Dank-Cali Flower with way deeper notes to it. light hits the plant with around 750 PPFD.
Likes
12
Share
Esta por empezar el engorde final. Ya las flores estan casi formadas. La altura está al límite total. Uno o dos centímetros más y estaría en problemas de verdad. El engorde de muchas flores ya es notorio, pero creo que el uso de un bioestimulante que no es de primera línea, ha reducido el potencial de las plantas. De todos modos hasta no tener el resultado final no puedo afirmar nada. La solución de esta semana fue cargada con más pk booster para ver cómo funciona la linea de greenhouse en esta etapa. Suelo usar pk 13/15 de canna. Pero esta vez puse el que tenía. Seguiré actualizando. Día 31. Se nota mucho el engorde. Las hojas muestran pequeños signos de sobre fertilización, pero nada grave que no haya visto antes. Me suele pasar en esta semana en todos los cultivos en hidroponia. Pero las veces que ko me pasó, no tuve el engorde deseado. Por eso manejo mediciones de PPM superiores 1000. Se empieza a ver cuáles van a ser los cogollos más grandes, pero sigo con incertidumbre sobre cuanto más van a engordar. Estoy bastante conforme al momento. Hoy tuve contacto con plantas macho, pero me cambié toda la ropa antes de acercarme al indoor y le lavé. Además no sé si sumará, pero me rocío en alcohol cada vez que entro a casa, así que espero no tener problemas. Ya voy a ir preparando los esquejes para la próxima siembra. Quizá no logre sacar 10 de las madres que tengo. Pero quizá ponga menos y los haga crecer más tiempo y con bastante LST. Pero será en otro protecto. Por ahora espero que siga el engorde. Día 33. Ya el engorde es un hecho. Por el momento estoy bastante satisfecho. La solución se concentró demasiado así que tuve que agregar agua. Pero más allá de algunos signos de sobre fertilización mínimos y pasajeros en las hojas, la plantas se muestran saludables y firmes. Todavía sigo buscando la posibilidad de agregar overdrive la semana que viene. Todo está por verse. Ya puedo asegurar que va a haber una séptima semana de floración, sino debería empezar el lavado en 2 días, cosa que a la vista, sería muy apresurado. Así que seguiré esperando a ver las flores con los pistilos más secos. Entre tanto los tricomas ya están formados, pero recién van a empezar la maduración en unos días. No saco foto porque el celular no hace buen foco con la lupa, pero ya intentaré mas adelante. Día 35. Cierra la semana con una buena idea de lo que van a ser los cogollos. Según el calendario de la planta, debería empezar el lavado esta semana, ya que sería la última. Pero por la madurez de los tricomas, todavía le faltan entre 10 días y 2 semanas más. Así que se viene otra semana de sobrecarga de PK y voy a aumentar la dosis para aprovechar a medir el nivel de tolerancia de la planta a altos niveles producto. Al ser hidroponia y trabajar con el ambiente bastante controlado, confío en que voy a poder aplicar correctivos a tiempo, si empiezo a notar defasajes bruscos.
Likes
149
Share
Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. I put some pictures on the construction here in week one. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable theme in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 8 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. Today I have put my seeds in my moisture dome and hope the seeds have germinated within a few days. I am very excited to see how the new growroom will work and how this Blue cheese Auto from Royal queen seeds will turn out. Blue Cheese automatic cannabis seeds are a cross of Blueberry Automatic and Cheese Automatic that has been perfected over five years of breeding and careful selection. The result is a feminized, autoflowering strain with superior yield, flavor, and effects to either of its distinguished parent strains. THC: 16% CBD: Low Yield Indoor : 325 - 375 gr/m2 Yield Outdoor: 60 - 110 gr/plant Height Indoor: 40 - 70 cm Height Outdoor: 60 - 110 cm Flowering: 7 - 8 weeks Harvest month: 9-10 weeks after planting Genetic Background: Blueberry x Cheese x Ruderalis Type: Sa 35% In 40% Ru 25% Effect: Cerebral and uplifting Climate: Mild ................................................................................................................................................................................................................................................................................ 2017-11-10. Week 12 day 3. Starting to see amber trichomes and will start flushing her today. Expecting to harvest two of the 3 girls in one week. Added pics.
Likes
Comments
Share
Likes
29
Share
@EXZELENS
Follow
1st of November, HARVEST, D91 So, after the 24 hours of darkness, she is now beautiful and ready. After chopping her, I hung her for some hours – I had some stuff to do – and after that I did wet trimming since I find it more convenient and I don´t like to trim dry buds. I guess the best way for me would be to leave it drying for some days, do the trimming, then leave it drying some more, but, I sincerely don´t have patience lol. When I was in the last stock to trim (which was the main btw) the top bud looked strange to me so I opened it and it was starting to rot.. I got really sad but what can I do except for trying to save it, right? So I took all the rotten parts out of the top bud and tore it to pieces to watch it closely and keep it from getting any more mold. D94 Today I weighed the half part of the top bud that was already dry and it remained without any mold: 3.6 grams. D97 Everything is dry and now curing, the total weight is 68.6, 65 of the whole plant and 3.6 of what I saved from the rotten bud. I´m really happy with the results, the buds aren´t much dense but they look beautiful. D111 Today is the 14th day of curing. D120 Today I´ll be doing the smoke report, it´s been curing for 3 weeks and the smells is quite good already, I know it can be better but the taste is good already so I´ll be doing it today. More info on growing in the previous weeks and a summary of growing and also the smoke report are on the top at the strain review. Thank you very much for reading my diary!
Likes
32
Share
@BB_US
Follow
This week I transplanted my ladies to their 3 gallon oxypot. They both look very healthy with a big root mass and strong stalk. Topping in 4 days or until they are settled in proper.
Processing
Likes
22
Share
@Njaak
Follow
For this grow I kept my setup a lot simpler than last year. Going with Jack 47 because, well, reviews are awesome and we've had success with Sweet Seeds germinating well. From the pics and videos you can see I've got a simple bucket for the plant with no air stone, pump, or other shit in the plant bucket. All that is in the reservoir. Should make it easier to clean, flush, etc. I'll be able to just pop the lid off (with plant in the net) and put it on a clean bucket with pH balanced water while I clean the rest of the system, then hook it right back up. I also over-designed so I could add a second grow bucket if I want. Don't have space for that at the moment but non-loadbearing walls are easy to move, right? Using General Hydroponics for nutrients and Hydroguard for good measure. Knock wood I'm not jinxing things by posting before I have seedlings.
Likes
4
Share
Harvest - Let me start off by saying how impressed I am with this plant and the flower produced, not only was it consistent with the description but it seems to be consistent across other diaries that i've seen - really top notch job i'd say. Grow: Growing went without hassle, this plant started off it's life from seed being vegged under my hlg quantum board for the first 5 weeks of its life - after that I left it inside under 5-6 hours of direct sunlight to flower, bud chunked out nicely and i am impressed by the yeild considering the amount of light. Smoke: I love this bud, It is truly pleasant to smoke - so smooth you could smoke it constantly without fear of harshness. The creamy and sweet flavor are a real treat. I will definitely be growing this again
Likes
253
Share
@Hologram
Follow
Sticky beast is waiting for some good sunrays so she can break out of my garden!!😎👏👏👏 Garden is smelling real sweet too, thanks to her 😵👌 I love her structure, i have topped her, but LST was not that necessary.. only defoliation, a lil bit.. i love that bc i hate LST, (im not that good in it..😳) She turned out great, she grew open and wide.. just by herself. 😇👍(maybe also becouse i let her dance in the wind 😎 and move her around a lot) Lots of bad weather this week(cold and wet, she is in greenhouse a lot).. but luckily her buds are still healthy👌 And dont forget: FOR ALL MY GROWBRETHREN/SISTREN IS A DISCOUNT CODE: ZAMMIGD2023 happy growing for all ✊
Likes
26
Share
🌱✨ Here’s the wrap-up for Week 9 of the growing season! 🎉🍀🌿 Our girls have officially taken their final shape 💎✂️ and are all set to begin the exciting flowering stage 🌸🔥. They’re looking amazing 🌟 and thriving just as planned 💚📈. With every stem and leaf perfectly positioned 🌿🔄, we’re gearing up for a breathtaking bloom 🌸✨. Stay tuned, friends—there’s so much more to come, and we can’t wait to share the exciting updates with you! 🚀👀📔 The best is yet to bloom! 🌞👊💚✨
Likes
11
Share
@Rumham
Follow
The grow started off pretty slow due to user error, but in the end through trials and trepidations we overcame and ended up with a pretty decent harvest. I personally can only get better and will continue to use what iv learned and documented in my upcoming grows. Dried in about 9 days at 47-55% RH and 63-67° F. Edit. Didnt weigh it wet so after getting a little over five ounces dry I'm just using a 3:1 ratio to figure in the wet weight. Granted that doesn't account for all the popcorn buds, fan leaves, and stems. All the left over unmatured buds and larf will be turned into edibles and salves. Happy growing!!!
Likes
10
Share
End of week 8 and mid way through week 9. Already put nutrients in and already finished first flush. Will be flushing from now on, trying to get 6.5 everytime. Room is 24 degrees at 55 percent Rh sometime 45 or 65. Smell starting Ng coming from no where, good bud smell coming from them.
Processing
Likes
33
Share
✋Wk 7: Will the size difference begin to fall in line with the predictions, and rearranging the wind. 👉 This week is Day 48 thru Day 54 total. (Feb 16 thru 22). Today (day 54ttl) the 1 gallon plant is at day 21 flower and the 3 gallon is at day 9 flower. 👉 This week has shown some interesting things. The 1 gallon plant is still ahead in the physical timeline, and has also started to demonstrate how the smaller pot is limiting its size. The 1 gallon has been ahead of the 3 gallon plant in size and stature, until this week. The 1 gallon has stopped stretching and is beginning to develop its flowers. I was worried it would continue to get bigger and may become an issue vertically as well as horizontally. The 3 gallon plant has grown a few inches and isn’t really stretching up yet, but it is growing overall in size. It’s a big dome of leaves right now. Its main cola is same height as a couple of the secondary branches. I doubt the main cola will remain the same but this plant hasn’t been typical from its germination so only time will tell. 👉 The other interesting thing has actually been trending this way for a couple of weeks…the run-off for both plants has been lower than the inflow and no low EC fertigation has been needed. The 1 gallons roots are undoubtedly densely packed in the pot. It takes several minutes to apply the nutrient solution. The volume needed has also increased. The 3 gallon still readily accepts the solution, but it takes more every day and the run off takes longer to start running out of the bottom. The saturation level of both pots has increased, and the 3 gallon especially. The EC for both has stayed below the inflow EC. This is unusual because part of the volume of water in the pot when saturated isn’t absorbed by the plant, it evaporates on all sides of the pot and the top of the media. This would leave the dried nutrients wich would rinse off at each fertigation adding to the TDS. The reduction of EC in the run-off means the nutrients are being utilized by the plant. I have dropped the inflow EC of the 3 gallon a little because I was worried about burn. I have kept the EC of the 1 gallon plant at the low end of the recommended EC range of the General Hydroponics drain to waste nutrient schedule chart for the Flora series of nutrients. I use the entire line of these nutrients. For the one gallon I had been giving it only the “simple program”, and the 3 gallon the “expert” (entire line). This week when I noted that the stretch has pretty much ended for the 1 gallon, and decided that I will go ahead and give it the expert mixture as well but given at the low end of the EC range still. Ive included the Fertigation log for the week. It shows the tent temps, the outdoor temps and HVAC setting. Also, I note when a fresh batch is made and what week on the schedule it is. Each pot has the recorded time of fertigation, volume, pH, and EC of the solution given and the corresponding run-off. I mix the solutions at full strength and use a solution with just silica and Cali-magic to reduce the EC to the desired EC. I mix that in at fertigation time. I also adjust the pH if necessary at this time. 👉 The structure of the 1 gallon is very stout main trunk, and each branch is very sturdy. The bigger fan leaf production has given way to smaller leaves. The structure of the 3 gallon also has a very stout main trunk and each branch is very sturdy. The 3 gallon has some very large fan leaves and it has lots of vegetation. Its very dense and hard to peer inside. For both plants I have begun to selectively remove branches that would not be producing anything but larf. The 1 gallon only needed the lowest main branches trimmed. I also removed some of its smaller shaded secondary branches and leaves inside the canopy. The trimming on the 3 gallon is similar, however its much harder to get inside. I just do a little at a time at each fertigation. Im not sure if the first set of branches on the 3 gallon will be tall enough to keep but I want to wait till the plant starts stretching to see what they will do. Ive left as many leaves as possible in the 3 gallon…a lot of really nice fat food factories. This plant may go very large, or it may stay somewhat stunted as it did during the early veg phase. 👉 I positioned the plants I closer to the back wall. I bought a oscillating tower fan and was hoping it would be a good addition to the tent. Alas, it had too strong of a wind current (on the lowest speed) and the 1 gallon was showing signs of wind stress after 2 days. So I removed the fan and re-positioned the smaller fans I had clipped up top of the tent. Both fans are now hanging lower on adjustable ropes and point toward the plants. They are working well like this and the air flow is good. I may modify the oscillating fan and install a variable resistor to the fan motor to reduce the flow. I have added the branch support to the legs of the stand the 1 gallon is on. These posts will be used to support the weight of buds or position them as needed. I will add the support posts to the 3 gallon plant after it has gone thru its stretch, maybe another 2 weeks for that.