******************************************** Week 12 Mid flower (week 6 flower) ******************************************** Light cycle=12/12 Light Power=160w 67% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 50% Rh step=0% Speed max=10 Speed min=3 Extractor controller settings (during lights off). High temp= 21c Temp step=0c High Rh= 55% Rh step=0% Speed max=10 Speed min=3 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -22.5c Radiator off=+23.0c Top fan on= Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-18.5c Radiator off=+19.0c Top fan on VPD aim=1.0-1.5 DLI aim=40-45 EC aim=1.0-1.8 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 10-19-30 Method= Automatic Feed=Flower nutes Neutralise=0.1ml/L Plagron bloom=5ml/L Plagron Power buds=1ml/L Green Sensation=1ml/L Easy Ph Up=0.053ml/L (1ml=23 drops, each drop is 0.043ml) Ec=1.75 PH=6.3/6.2 Runs=18 Run times=4mins (0.3L each) Gap times=16 mins Total runtime=72mins(5.5L each) Total flowrate= 152ml/min(76ml/min each) Auto start time=10.00am Auto stop time=15.44pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅22/12/24 Sunday (Day 78)(flower day 38) 📋 💧 Automatic mid bloom nutes Ph up=0.64ml, 15 drops Ec=1.75 PH=6.3/6.2 Volume=12L Volume left=1L Volume used=11L(152ml/min) Volume each=5.5L(76ml/min) Runoff. Total runoff=0.7L Ec=4.0 PH=/6.1 💧 📅23/12/24 Monday (Day 79)(flower day 39) 📋 📅24/12/24 Tuesday (Day 80)(flower day 40) 📋 Christmas Eve. 📅25/12/24 Wednesday (Day 81)(flower day 41) 📋Christmas Day. Have a merry Christmas. 📅26/12/24 Thursday (Day 82)(flower day 42) 📋 Boxing Day. 💧 Automatic mid bloom nutes Ph up=0.69ml, 16 drops Ec=1.8 PH=6.3/6.2 Volume=13L Volume left=2L Volume used=11L(152ml/min) Volume each=5.5L(76ml/min) Runoff. Total runoff=1.0L Ec=4.4 PH=/6.2 💧 Leaf tips are getting burnt and runoff Ec is climbing so just water next time, should have really just been water this cycle. 📅27/12/24 Friday (Day 83)(flower day 43) 📋 📅28/12/24 Saturday (Day 84)(flower day 44) 📋H=81cm D=32cm Dli=40.3 ppfd=932 ******************************************** Weekly roundup. 📋 She has done fine this week, showing a bit of nute burn but plodding along at a decent speed. This zoap is further along in development then the other strain. The weather is still fairly cold so used 34.17Kw £8.64 on the radiator. Back soon. Take it easy. ********************************************

Week 17 Nothing really moved this week. It’s something like between low tide and high tide: not my favorite moment … waiting for blossoms and flowers 🙄🙏. Good point is that every plants are healthy ( except a parasite problem on Psicodelicia) and well prepared for flowering. For now it’s bad weather outside: 20 degrees max, with lot of wind and rain (cf video). The green house is the best option despite of less exposure. Morning soon I moved the plants outside to sprayed them with potassium soap (natural insecticide). I cleaned the grow space inside the greenhouse (didn’t touch spiderwebs…good insecticide too). I removed the automatic watering and get a few liters of rain water during this days. Watering 1L every 3 days -Calmag + Cannazym + Alga mic + Root booster -Flora Series: preflowering quantities. Daylight 14h30: 6h50/21h20 Psicodelicia is still a pretty plant but I saw some bad leaves covered by white spots… behind I notice some little light yellow grubs: it’s certainly a thrips attack. I treated the plant with potassium soap and wait before the Neem oil. The numbers of blooming sites are well identified and growth is totally fixed.

Hi Fellow Growers They are going good. The heat its stressing them. the are not drinking so much water and yellowing a bit.... Not so Nitrogen Green but i thinkthey are doing fine. Maybe some Co2 whould help them. Give me some Ideias how can a use the heat and make it become beneficial Chears BrotherHood

La semana pasada corte apicales y esta semana una buena defoliación dejando namás que las copas y poco más. A finales de semana las resitué y puse a todas en su sitio . Dos que habia descartado y las tenia en maceta de 1 L las trasplanté a una maceta de mayor tamaño y saqué al exterior.

Well, the drought stress in week 11 really fucked my plants up, but Twiggy recovered, while Zoey was hurt pretty bad. If I did nothing, I'm betting harvest would've been 25% more, and Zoey's buds wouldn't look so crappy, but overall, I was so happy with this grow! I was under a time crunch, so only did minimal veg for 4 weeks, topping once. Daily watering with 1.8EC mix that was pretty consistent. Kept pH between 5.5 and 5.8. Kept tight control on humidity and temperature up to mid flower, then kept air circulation on to keep room humidity around 55% Things I'd do differently: 1. Veg longer - I'd love to try a mainline 2. Canopy control - wish I had spent the time on a SCROG screen, or at least a couple of rings. 3. More light sooner into flower. Waited about 4 weeks into flower before maxing out the light. Probably could've bulked them up significantly if I started earlier 4. Drought stressing - For Fucks Sake, keep a close eye on your plants, and the minute they start to wilt, get the water back on 'em!!! 5. Measure your run-off more frequently for salt build-up. Didn't have any problems, but it's a good best practice. 6. Set up proper closed-loop environment to allow for CO2 enrichment. 7. Set up a clone environment before you get to flower. Oops. Things I was happy with: 1. VPD control system (heat, humidity) during veg and early flower worked flawlessly. Never any nute burn, and super healthy plants. 2. Sterilized soil and grow-room before starting - never had a single bug or any mold/mildew issues. Used a MERV 13 filter on the air intake, exhaust through carbon to crawlspace. 3. Coco/perlite mix - super drainage, low build-up, very healthy roots. 4. Power meter - neat way to measure what's really going into the grow, so when your wife complains about power usage, you can show her the real numbers. 5. Photone app on Android S20 - Knew where my PPFD was for optimal growth control. 6. REX-C100 PID controller for toaster oven - super tight temperature control comes in handy for decarbing as well as toasting oak for moonshine.

A Special Project from Germany and Welcome to Veg Week 3 of GoodTimesGenetix Blue Cream Haze I'm excited to share my grow journey with you from my GoodTimeGenetix Seeds .Im the First Person outside my Friends Company who got hands on this Strain . He Managed over a long time to Cross these Strains: -Blue Dream (Blueberry x Super Silver Haze - Female) -Ice Cream Haze (Gelato x Wedding Cake x Crockets Haze - Male) They Done a lot of Tests for a Nearly Perfect Stabilisation of this Genetic and Feminized them aswell . This one is Professionell Created In Germany , Growed in Germany and presented To the World on Grow Diaries. Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: GoodTimesGenetix • 💧 Humidity Range: 60 • ⏳ Flowering Time: 8-9 Weeks • Strain Info: 23%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.1 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Well I'm 7 weeks behind, been busy with work, family, maintenance on house and been busy with plants. But anways, I had to harvest a plant 6 days ago as there were to many nanners that showed up over night. Had some nanners on a couple other plants that I was able to keep up on plucking. The temperature is a lot cooler than I would like but that's because I'm maxed out on my breaker and I've been trying to keep my garage at a constant 60 degrees with a wood stove to help heat the grow room. Other than that, the buds smell super dank, they look bomb as shit and harvest is right around the corner! I did mess up on mixing nutrients this whole entire grow as I might have ended up with some sort of nutrient lock-out. I never got the nets put up and so far I only had to stake 1 plant. Harvest is looking like it might be this weekend! Any suggestions or thoughts for the next grow as I did start 10 more seeds 12/08/23...? As Always, Happy Growing!

💥☄️⚡️🌪️

Loving this ladies canopy. It makes me smile every time I see it 😍 Great development so far. Hoping for a quick flower period for this one!

NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 4x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix

She is getting nice and fat.

FBA2507 Light mix finito✔️BANG To the guy behind this strain : THANK YOU it's a one-way to the past when I was harvesting peaches in my grandpa's garden👨🏻‍🌾 Once again the quality of the buds 😳!!! In coco she s huge🚀 Same feeding + Green Sensation RoOoOaAaaADDD I've ever been down👻 Take care 💚

day 44 - The growth process continues unabated. I am waiting for the desired size. 8 days after flowering it didn't grow as much as I thought it would, so we went back to the growing season. 👽 day 49 - I decided not to cut the leaves anymore after much defoliation. It easily tolerates strong stress easy to grow.

Semanas finales 🚀

This was quite the grow y'all. The blumat soaker hose was a great addition... once I figured out why it kept getting stopped up. I can't wait to get another living soil grow going cause that was a lot of fun!

Looking nearly ready smells amazing had a heave bud snap yesterday well 2 saved one one came of more than likely will harvest next week as this is the last week 👍😎💪

The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Day 1 we had thunderstorms, rain, and drizzle early morning and intermittently throughout the day. Temperatures were lower 80's. Day 2 we had thunderstorms and rain in the morning, then rain and drizzle intermittently throughout the day. High temperature for the day was 71° Day 3 we had lots of sunshine and high temperature around 84°. Day 4 we had partly cloudy skies and a high temp of 72°. I watered from the hose about 2 gallons per pot. Day 5 we had lots of sunshine and clear skies. High temp was 89°. I watered about 2 gallons per pot from the hose. Day 6 Day 7 we had rain the previous night and today lots of sunshine. High temperature was 86°. The rain took care of the watering today. This week was a success. These girls are adding height and enjoying the warmer weather. It's been somewhat dryer, but we're still getting rain every few days. They don't seem to mind it. Now that they've been moved to their permanent spot, they should take off growing.

They are happily growing had some problems with powdery mildew but got kinda rid of that atleast thats what I hope Date: 4.9.2024

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.