Likes
Comments
Share
She is growing back out nicely and in a week or so I am starting on revealing her rootsystem First start has begun….🙏❤️
Likes
30
Share
Start of week 4, had a small problem I turned the mixing pipe on last Monday and forgot to turn it off so they didn’t drink for 3 days. All seem ok now.
Processing
Likes
29
Share
12/15: Lowered the lights a little bit and installed a new fan to increase airflow. Starcandy is the garden star..she's be the best producer and smells wonderful...can't quite put my finger on it yet..a little less fuel nose than the last ones....more of a sweet smell. Skunk is stating to bud up pretty quickly now, but has no malodorous emanations as of yet. Starcandy x Gelato is still very much in the lead and frosting up very nicely. Starcandy x Strawberry Cheesecake smells killer....just wish she was bigger. Pineapple Express is starting to fatten. She has very thick pistils and smells just like she's supposed to now. Strawberry Pie doesn't seem like she's gonna stretch much... 12/16: Fed today. SP is frosting up already ..still no stank from the Skunk..
Likes
14
Share
@Posterboy
Follow
First week of flower. One of these will end up herming out with nanners over a month later. Can you guess which one? Feeding is all organic. Once I'm in flower I switched to dry amendments and compost teas and cut out the big bloom. I will also add silica next week as a one time boost.
Likes
37
Share
@MG2009
Follow
10/05/2018 I'am thinking about 2 weeks out ?🙏 Cooler weather coming soon, buds starting to swell up i believe. #2,and #4 are the only ones to get any mold. All others are clear of any sign of mold. Number 1 seems to have more of the ghost 👻 train haze smells a!most identical to it but a little something different.Brrrr it's 41° out , now it's 39° Ps I think #1 will go 70 -78 days 10-11weeks? Potted plants will be at 63-72 days but just a guess the trich's will tell me when.👍
Likes
60
Share
@m0use
Follow
This week has gone well, had a bunch of stuff typed out and closed my browser by mistake and now this is #2 attempt to post this week. Easy week for the plants, they have being growing well and I am impressed by the size of them. I added in some potassium silicate to introduce some Si into this grow. I decided to top them as they where starting to grow their 4th node, snipped that tip off and we're golden. They are kinda smelly if you rub them and that's fun too, Some of the hot peppers have also popped up and started growing. I still don't have anything on the Naga Morich pepper that I am hoping for. I have a feeling that as the seeds I got from these peppers where from a dehydrated pepper, they might be duds nuked from the dry heat of the dehydrator. I do have 4 vials of hot pepper seeds where the label has fallen off, I found the labels but no idea what one goes on what bottle. One out of the four bottles is Naga Morich, Having some none dehydrated seeds in my possession is one step closer to getting more of this hottie. I also found a fly out of no where, Its little wing is damaged and it more or less hops and glides unsuccessfully vs fly's but I took some videos of it. I also seen a few fungus gnats, little fuckers where not in my apartment before I am convinced their eggs survive in the stuff I buy then come out of it. Kinda annoying. PLUS I borrowed a light meter from my hydro shop, I was expecting it to be a LUX meter and that I would have to do a bunch of conversions but it was not, it was a legit Quantum Par Sensor, detecting in PPF "Photosynthetic Photon Flux" or umols/s, with these readings I can calculate my PPFD "PPF+Density" I have mapped out my tents floor into a colour coded grid of dots and mapped out the PPF at varying heights and dims. However I did not do it right and need to redo this. But once this is done I will have a functioning PPFD map with relation to my tent. This will help me tone in DLI and get it aorund a solid 35-40. Will be gearing up for a transplant next week. I try and post on Fridays but don't always get around to it. I take the pics on that date though and then try and remember what I was going to write about that week. PS Gorilla Tent Accessory's suck shit. The SCROG nets pic has the gorilla 2x4 SCROG net "black" and the Secret Jardin 2x4 SCROG net "white" beside it. massive difference in quality and size. I should have known when they state on the label its for 2x2 or 2x4, that's not even possible. Also tried out the nutrient line that's part of the gorilla tent company, Lotus, I ran it one year and it was just trash, did not work, had issues since first week and they would not correct. Buddy reached out to me and said same thing happened to him and he disliked the brand. Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.com/grower/MedicGrowLED
Likes
2
Share
@User8
Follow
Showing the plants in pre flower
Likes
4
Share
Switch to flowering stage Day #38 12/12 with red LED light from tonight on. ScrOG net Is on. Pots are still wet, no need to water. I defoliated a little bit, then I'll let the alone for a while. I need to find a environment for the clones. It stresses me a bit but I don't want to kill those 4 little clones, not voluntarily. Day #40 I still tend to water too much but I'm slowly learning. Watered until saturated with Biogrow and Atami B Cuzz a +b (for coco, whatever),a swell I added a bit of magnesium nutrient by Cifo, a garden store brand. Trying to understand how to ScrOG. I built a small growbox with leftovers from my garage. Not a penny was spendt in this operation. Clones are still alive. Starting a new diary. Last night reading blogs I discovered 💡🌟🔆 Photone App 💡🌟🔆, a free grow light meter https://growlightmeter.com/download/ They also have a web guide to establish how much light your canopy needs in the moment https://growlightmeter.com/calculator/ . In pre flower it figured out I need 1100 umol of red LED light (calculation DLI). I adjusted my light height accordingly, It was too close. Very, very useful. Those guys in switzerland deserves a huge kudo. Day #42 Growth Is fast. I snapped a branch trying to ScrOG so I repaired It with wire, as I done with tomato before. Watered with some broth and my own nutrient I use in my garden. I defoliated a Bloom that was facing down. Humidity at 60%, I'm struggling with It a bit. Dehumidifier in the room Is now set at higher setting. Happy growing. Any advice is apreciated.
Likes
29
Share
The plants had been a little root-bound before transplanting them into the bigger pots, this showed in a yellowing of the leaves and a slowed growth. During week 5, now in the bigger pots, the plants are recovering quickly. The start to grow in a nice healthy green color and quickly get bigger in size. Since the light-mix has nutrients in it for appr. 2 weeks, I only add a little BIO NOVA Roots and BN-Zym to my 'FLEXITANK' reservoir. After adding the nutrients I measure the ph-value and see its 6,6. That is too high for cannabis-plant on soil, they cannot take up all nutrients at that ph-level. Therefore I use ph-min from BIO NOVA to decrease the value of the 100 liter nutrient solution in my reservoir to ph=6,0. At this ph-level the plants can take up all nutrients they need for a healthy growth. My two SANlight EVO4-120 LED-fixtures are hanging 75 cm above the plants and are tilted inwards by 11 degrees, following the recommendations of the lights manufacturer. The fixtures are dimmed to 60% of power (=1 green light ON on the dimmer) at this stage, so they plants get a nice stretch and grow into bigger plants fast.
Processing
Likes
9
Share
Everything going great. Just switched to bloom nutes and gonna ride out the rest of the time. No issues from what I see, all the plants thriving and smelling potent!
Likes
11
Share
Week 10 November 11 - Looking good need to up the calmag as the leaves are looking weird again like in early veg -Will be defoliating at 21 days of flower so bout the end of this week -flowers and bud site are looking good and flowers are forming well - had one clone survive outta four but it’s all good at least one survived -Will good a good top and bottom watering later this week
Likes
11
Share
@artems
Follow
Marker didn't take well to the mainlining process; as a result, one cola was almost entirely consumed by mold. However, overall, things are looking good. I ended up with a small, resilient plant with a nice aroma of pineapple and Skittles, with hints of gas towards the end. 🍍🌿 Towards drying and curing now! 🌬️🎊
Likes
3
Share
@nicoaze
Follow
Good plant! Was attacked by flies (Sciaridae), thrips, tetranychus and a monster cat but always remained strong! The attacks had just slowed down the growth (this little one has 2 month of growth). Even in microgrow, the blooming is really impressive: as fast as an indica but for as long as a sativa. The genetics is not perfect: some parts of the same flower were too mature and some new parts swere still emerging... it's a research strain! The smell is really good and relatively light comparing to others strains. After few volacano : the weed taste like "tropical soda" or passion fruit mixed with cream. The effect is much stronger than I expected for a THC-CBD hybrid, is more indica than the pure indica: the afghan side + the CBD relaxation make a real sleeping medecine. => The taste and effect are really different from every other strain, try it!
Likes
8
Share
8th week! The plant has a slight guava scent, very interesting! Nice growth rate and no problems so far.
Likes
24
Share
@MrPott
Follow
Really surprised with how everyone turned out! Everyone is starting to flower but Kayla definitely got the lead in terms of pistils and bud sites. These ladies still need to be LST every other day. Looking forward to an early harvest!
Likes
34
Share
Day 114 harvest has gone exceedingly well unfortunately the vids of the harvest wont post but i will keep trying thanks for following the grow and i hope to see all of you in the next grow Update a finally got the vids !!! well holy crap its a good harvest again for just 1 plant 9 oz baby
Processing
Likes
175
Share
i decided to give my girls their first cut. i used the so called Fuck I Missed technique in which there is the possibilty to grow up to even 8 new main stems. i'm currently stil thinking if i should do this multiple times or use topping. next week i will post the results from the cuts and hopefully they are all done correctly. the plants are getting a great smell even though it is still weak.
Likes
111
Share
@DevilsBud
Follow
Week 2 of veg Hyper glue Start of new week everything going as planned i will be bumping up the nutrients and by end of the week will be transplanting to 8 L fabric pots. Posting pic of progress Tru the week see you next week 23/9/21 transplant complete mix some Easy Boost Organic Nutrition with my Plagron batmix work great last time also made video Happy growings Growmies thanks for popping by 🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT100X100X180 Marshydro Ts 1000 LED lamp Some handy info about the marshydro TS-1000 Increase Yield&Crop Quality in Led Grow Newest SMD Led technology provides the highest Par/Lumen output, makes you get 30% higher yield compare old led lights, can get up to 2.5g/watt yied. High Efficiency Energy Saving Plant Light Only 150 watts true output with so you don't have to check your light bill every month 😎 342 pcs LEDs, more scientifically and energy-efficient! Perfect for 3'x3' (100x100cm) veg stage and 2'x2' (60x60cm) bloom stage, higher intensity in a Mars Hydro grow tent. Sunlike Full Spectrum Led Indoor Growing Infinite close to natural sunlight, suit for all plants whole satge indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. High Reflective&Noise Free Fanless Led Grow System Quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants for maximum headroom