The Grow Awards 2026 🏆
Likes
Comments
Share
Been another smooth week. A few of the plants are starting to show signs that they are moving towards the finish line. Seeing some swelling, pistils starting to brown, and some beautiful purples coming out in some of the buds. Been debating on giving them a dose of dry koolbloom, but I will probably just keep them running on the maxibloom until flush since they look pretty happy. This blackcherry punch is just impressive. I love her purple buds, decent size colas, and dank skunky aroma. She has swelled up a lot the past week. I'm thinking she might be the first to ripen. Will probably move her to the front of the room sometime this coming week so I can start watching her trichomes.
Likes
4
Share
Mainlining is progressing nicely. The main stem was topped at the 3rd node, and each main branch was topped again at the 3rd node to build a clean and symmetrical manifold. I always wait until the branches have 5 nodes before topping, to make sure the plant is strong enough to handle the stress. This week I performed a selective defoliation and some light LST, only to guide the branches and keep everything level. I’m still deciding between 8 or 12 main colas, depending on how the plant continues to respond. In the video you can clearly see the before and after of defoliation and training 🌱💪
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
7
Share
So after consideration of the density of the buds and my night humidity levels— decided to chop a week early. Buds are super dense. Concern for mold. Very leafy lady- with massive fans She’s 10% amber but still some white pistols on the lowers. Very easy to grow. Stayed on the shorter side with minimal stretch—which is appreciated. I love how the Plagron Green Sensation is nitrogen free! I used it from weeks 3-6. Super helpful as the leaves were getting a little curl— even with minimal nutes. Will have harvest report soon. As terps can change after dry/cure. Happy with the results of the Runtz and Plagron! 🏻💚
Likes
3
Share
@camo420
Follow
NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 4x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix
Likes
2
Share
@Dsant
Follow
D33 - 19/02 Haven’t changed the reservoir this week yet. A few burnt tips on Northern Lights #2, will probably go a little lighter on nutes next feed - she’s definitely more sensitive to them than the other ones. Overall great looking girls and nice growth. The #2’s are higher than the #1’s, nodes developing nicely and the scrog is definitely helping with lateral growth as well. — D35 Mixed a new reservoir with roughly 19L, at around 70% strength. pH 6.0 and EC 1.1 Humidity has risen a bit, so I installed the dehumidifier again. Apparently the tip burning has stopped, or at least slowed, which is good. #1’s are at around 25cm height, while #2’s are around 40cm height. — D36 Did another defoliation session as the girls really needed it. Cleaned a lot of the big fan leaves, airflow and light penetration is way better now. A few hours after and they’re super happy again.
Likes
11
Share
This is the last week. These girls getting chopped they are all sooo fat so dense sk heavy it's insane. Going to be a large harvest I bet! Has a way loud gas sweet smell and are just so sticky they almost stick to ur fingers!!! These girls have been fading Out all nice on their own just let the soil do its thing. Will chop these girls and give them a quick trim all the big leafs and let it sit and hang for 14 days in the cold. Got around 15% amber so it's time woop woop.
Likes
2
Share
@SUMAN
Follow
5th Week Of Veg She Is A Beautiful Plant, My Back Up Plant Started To Flower Has Anyone Else Experienced This?...🤔
Likes
Comments
Share
Plant smell okay this week, no big jump or sights but growing nicely, I got two type of phenos out the four seeds and I like that but I knw I gotta veg longer it I want mare form this plant
Likes
16
Share
Aug 17: Auto Overdose is a nice plant but it’s not an auto. I started this one late and only topped it once thinking it was an auto. Other growers have noticed it isn’t an auto too, so I forced it in the dark garage. Flowering has to be started by the end of July here or it won’t finish in the fall. The flowers are forming quickly and I suspect this is actually Overdose Fast. So far so good, and good genetics for a Fast plant. Aug 18: no UV light today unfortunately but it was decently sunny. Scrog net certainly seems like a good idea. This plant is asymmetrical because I broke one of the two main stems a couple weeks after topping. This changed the shape of the plant so it’s become one-sided as if I was growing it up against a wall. Lots of nice lower branches came up so she looks pretty good now.
Likes
25
Share
So these girls are now under their fc3000 and plodding along without issues allthough I have done absolutely no training at all with these girls they are doing just fine. Now entering week 8 I'll be putting them into a more spacious space over this coming week and take a good look at these girls see if anything needs a tidy up and post some better lower images 💚
Likes
14
Share
@TeaTime
Follow
One of those pot I’m already doing the flush. Tomorrow I’m going to do the flush with cold water and leave for 2 day in the dark before to cut. After normal flush, 3 day before I did the flush with cold and ice. And I going to leave for 72 hours in the dark.remember that it’s one of 3 pot of speed + , another pots I’m leaving for one more week .
Processing
Likes
49
Share
Everything seems to be going really well for her at this point its just simple maintenance till she's done doing her thing , I can say that shes a good little plant and that I cant wait to run one of these again in 18-6 lighting to see the difference Ill get . Thanks for everyones continued support ! -Happy Growing!
Likes
6
Share
@Thedibber
Follow
Last week or so for these girls. Incredible amount of frost on them and they smell ripe 👌
Likes
9
Share
@YD_59
Follow
one of the plants is flowering and the buds on it look nice so far but like said last week, it also has some seeds/pollen sacs, so I'm hoping there'll still be some buds on it by harvest, the other two haven't started flowering much yet, I've only taken videos because I don't have a light and I couldn't see what I was taking a photo of
Likes
10
Share
@ZombieNug
Follow
Week 4 of flower…gettin cheesy in here. Brought the nutrient strength from aggressive to medium as I started to see some tip burn. Amazing to see so many colas forming! Loving my first grow, such an addicting hobby!
Processing
Likes
1
Share
@MG2009
Follow
08/18/2019 Hope for some decent growth in next couple of weeks.🙏
Likes
23
Share
Skipped a week in my journal due to travels. Had my neighbor water my plants. Having some minor early deficiencies with my photoperiod plants (particularly the chem brulee)... so I decided to go ahead and give everything a solid feeding of Foop Bloom 1, 2 and Sweetener. This is their first ever bottled feeding. Have been running on supersoil and a prayer. Also top dressed everything and mulched with rice straw to help with the soil drying out a bit too quickly. Leaves have been yellowing on all three. Mostly relegated to the interior of the plants. Chem Brulee is looking a bit too yellow overall, as well. French Macaron is a 66in. Chem Brulee is 56in. Pineapple Meatball is 45in. I have a sneaking suspicion that my neighbor didn't water them quite enough while I was gone. Will probably continue with the Foop feedings... probably at least once per week. Don't want to overdo it. Also top dressed with my flowering top dress mix and mulched all plants with a thin layer of rice straw. 8/4 Sprayed with Neem Oil and Castile Soap 8/5 Sprayed with Gravenstein Apple FFJ and OHN 8/6 Sprayed with Neem Oil and Castile Soap (this will likely be the last time I spray with Neem Oil, as I don't want residual oils as buds start swelling. Also fed 1/4 strength FOOP to ensure we head off any deficiencies.