I installed a Water ring

Veg Week 5 – Growth and Care Period: May 10th to May 17th In the fifth week, I let the King Juice continue to grow and spread out across the area. The plant is getting denser and wider — a real bushy marvel! The cover crop is also spreading under and alongside the King Juice, creating a lively green carpet. For aesthetics and ecological balance in the grow box, I left one plant standing in the right corner — just for the eye and the environment, following the motto "It can't hurt." Additionally, I diluted EM1 microorganisms with water and watered with a total of 4 liters to boost the microbial life in the substrate and further stimulate soil activity. It’s simply a joy to look into the box and watch the plants grow bigger and bigger. Towards the end of the week, I thinned out and defoliated the King Juice, so it now looks a bit wild and ragged — but that’s part of the care to allow more light and air inside the plant. Unfortunately, I had to remove the ivy that was standing in the left corner because it didn’t fit well into the environment and didn’t harmonize optimally with the other plants. Lets Grow 😋

03.01.2026 – BT62 Es ist soweit: Die erste Pflanze wird geköpft. Gleichzeitig war sie auch die schwierigste von allen drei, dennoch bin ich mit dem Ergebnis zufrieden. Das Ganze wird nun mit der DryRocket getrocknet. Größere Sonnensegel wurden entfernt, zudem wurde darauf geachtet, dass sich möglichst wenige Buds oder Blätter berühren. Ich bin auf jeden Fall sehr gespannt, was das Teil kann und ob es für mich zukünftig eine Alternative zum Trocknen darstellt. Ich halte euch natürlich auf dem Laufenden. Des Weiteren möchte ich mich bei Shogun, DrainMaster und DryRocket für die Möglichkeit bedanken, ihre Produkte testen zu dürfen – das ist natürlich nicht selbstverständlich! Hier die Links zu den folgenden Brands: https://drain-master.de/ https://www.shogunfertilisers.com/de/ https://dryrocket.com/en/ ***UPDATE ZU DRYROCKET*** Ich habe die DryRocket am 03.01. gestartet. Zu Beginn lag die relative Luftfeuchtigkeit bei ca. 57–59 %, das Growzelt war vollständig geschlossen, inklusive aller Öffnungen. Anfangs habe ich versucht, das Zelt zusätzlich mit Tape abzudichten, allerdings hat sich dieses relativ schnell wieder gelöst. Am 05.01. habe ich das komplette Zelt mit Frischhaltefolie umwickelt. Dadurch konnte sich die RLF stabil bei 60–62,9 % einpendeln. Ab Tag 4 bzw. gegen Ende der Trocknung ist die Luftfeuchtigkeit dann kontinuierlich gefallen. Die Temperatur lag über den gesamten Zeitraum größtenteils konstant zwischen 19,5 und 21,5 °C. Lediglich für ein paar Stunden gab es einen Peak von 23,9 °C, ansonsten keine größeren Schwankungen. Die Buds waren überwiegend klein bis mittelgroß, optisch sehr sauber und das Terpenprofil ist nach wie vor sehr gut erhalten. Das Nassgewicht lag insgesamt bei ca. 335g. Nach Abschluss der Trocknung kamen die Buds für 2 Tage in ein luftdichtes Glas. Dort lag die RLF bei 52–54 %, was fürs Curen eher knapp, aber noch im Rahmen ist. Mittlerweile wurde alles in Grove Bags umgefüllt, dort hat sich die RLF bei ca. 55 % eingependelt. Die DryRocket funktioniert, man muss jedoch wirklich darauf achten, dass das Zelt so dicht wie möglich ist. Bei mir hat es ab Tag 3 deutlich geholfen, das komplette Zelt mit Frischhaltefolie zu umwickeln. Ich möchte klar sagen, dass ich für das Testen der DryRocket nicht bezahlt werde und mir die Rakete auch nicht geschenkt wurde. Grundsätzlich halte ich die Rakete für eine sehr gute und durchdachte Idee. Das Produkt ist Made in Germany, kommt aus meiner Region und in dieser Form gab es meines Wissens nach bisher nichts Vergleichbares. Der Ablauf ist extrem einfach: Pflanze ernten, aufhängen, Rakete starten – mehr muss man nicht tun. Aufgrund meiner Rückmeldung zur etwas zu niedrigen RLF wurde von DryRocket offen und lösungsorientiert reagiert. Es wurde nicht versucht, den Fehler auf den Kunden zu schieben. Stattdessen wird aktuell an Optimierungen für kleinere Mengen unter 500 g gearbeitet. Für die Zukunft würde ich mir wünschen, dass man das RocketFuel (Silica Gel) regenerieren oder zur Regeneration einschicken kann. Außerdem fände ich eine erweiterte App mit mehr Parametern und Einstellmöglichkeiten sehr sinnvoll. Der aktuelle Preis liegt bei 299 € inkl. Rocket Fuel. Ob einem das den Preis wert ist, muss jeder für sich selbst entscheiden. Produktion und Support sitzen in Deutschland was ein klarer Pluspunkt für mich ist. Ein weiterer Test folgt ! Wer mehr Informationen möchte, kann hier gerne reinschauen. In diesem Thread hat DryRocket viele Fragen zu ihrem Produkt beantwortet: https://forum.cannabisanbauen.net/t/nur-ein-entfeuchter-dryrocket-innovativ-oder-ueberfluessig-lasst-uns-das-klaeren-ama-mit-dryrocket/74222

Giorno 35 Tutto perfetto 👌 Ec a 1,74 piante in salute qualche insetto innocuo qua e là. Ci vediamo settimana prossima 🖐️

Burnt the tops of a few colas cut them off now just hope for the best this heat is a killa to control the environment need new lights I think it’s about time I switch it up to led

Rainbow Candy

This has been a dream to grow the only reason I marked it as neutral and not easy because of it being such a flowery bub.So you just had to keep an eye on the humidity apart from that she stood up to everything even when I was starving her from Calmag 😂🤷 Can't wait to be back with the smoke report

Cuttings are growing very fast, we added 2 more lights for a total of 800 W led grow light. On day 11 since have been put in the box we decided to switch to flow as we tought cuttings has reached the right dimension to fullfil the box. Still using only pH 6.5 water with no nutrients

Day 60F The PM on the cheese has gotten significantly worse in the last few days. I think it may have something to do with the constant humidity spikes every time I water. I haven’t been running my humidifier at all in flower so maybe it’s having trouble keeping the RH up during lights on. Just another reason to follow a daily watering schedule. The cheese and slurricane look fucking disgusting and I’m starting to doubt that a peroxide wash can totally fix it. It worked well for my outdoor crop so it should be fine but this time there is probably 3x the amount. I’ll make sure to really soak the buds and rinse them off good. Bbb#1 is flopping over like crazy from the weight. Too late to stake it up now so hopefully it holds until next week. Starting to foxtail a bit but nothing too bad. It is now 100% done and ready for chop. Bbb#2 is just getting frostier and frostier by the day. The purple fade is really coming along nicely too. Might reveg. It is now 100% done and ready for harvest. Black garlic #1 is finally filling out! I can’t believe it. Never heard of a plant packing weight on like that in week 8. The breeder did mention that it packs on weight later but I’m stunned. Taking her to 9.5 weeks. Black garlic #2 is looking very average. Average color, average size buds, average frost, average smell, probably an average yield. And it’s starting to get a bit of PM. Overall not happy. Will be taking her to 9.5 weeks. Zkittlez #1 has pleasantly surprised me. It was a bushy runt in veg but came through. It’s the third frostiest in the tent, super dense, stacked tight, smells great and looks great. It’s already got a nice amount of amber so it’s 100% ready for chop. Slurricane #4 looks insanely frosty even under all that PM. If I can’t wash it off it’s going in the trash. I want to chop this asap but have to cut everything at once unfortunately. It’s 100% ready for harvest. Badazz OG cheese is looking like a decent yielder but doesn’t have much else going for it. I think it still has some filling out to do. I can’t even smell the final profile change yet. The leaves are rotting off very quickly. Taking her 9.5 weeks. I don’t mind harvesting a bit later rather than early. From my outdoor experience, when a plant is picked early it smells like hay and wet grass clippings until it’s been curing for 3 weeks. When I harvest late or at 30-50% amber trichomes it smells like same scent profile it had when growing. Just my experience. I’ve read that the tobacco industry adds calcium and potassium carbonate to their crops to help promote fire holding capacity and to increase the whiteness of ash. Turns out some of the organic amendments I bought last week contain exactly that. I’m going to give each plant a light top dress to see if the tobacco industry is onto something.

10/23: I fed today with One, sweet & sticky, signal, beastie bloomz, silica, and a little Ca/Mg 10/27: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, kangaroots, and humic acid. Lowered the lights to no more than a foot from any cola..most are 7-9" away.

They are moving quickly these days! I’m using FF nutrients, then just water, then a mixture of molasses, recharge, and epsom salt, and then water again. Not sure if I’m overdoing it but they seem happy.

Gelato what a fucking beautiful plant she is becoming :)! Shit literally looks like some mephisto genetics frosty as fuck. Shit wish I had another tent I'll run the rest of my gelato seeds this shit is prob going be my fan favorite :) but fast buds still has plenty more for me to grow. Tbh every fast buds I grown I haven't been disappointed:). Looking to harvest this one in next 4 weeks or so so excited:)! Easily 4 zips calling it now ! :)

Just beautiful amd great smelling flowers. Received last nutrients this week. I start flushing next week.

Eine Schönheit die sicher ihresgleichen sucht.

So overall, very good strain. Can't wait for drying and curing of this one. Definately gona do again. Thanks sensi seeds for the strain and the win. I'll update on the smoke Happy growing👊

I had fun with this barneys gorilla zkittlez, although it seems like it was ready around 7 weeks, its as if the plant has been in the early stages of self seeding when I've harvested on day 54~ of flower.. Can't think any other reason why this would've happened Anyway overall the bud is 95% amazing, just a slight sadness at the miniscule seeds forming close to the stems in the centre of some buds that takes away from the taste a little

To bardzo proste, ale trudne bo nielegalne.. JP 100%

Will try to log weekly 😅

May 10th Just patiently waiting Switched nutrients back to straight Dense Buds @ 1200 PPM May 12th Switched nutrients back to what is posted on in the diary. The two days of straight Dense Buds really tightened up the Buds. I t is getting very close to flushing 👍😎 Most Buds look ready but there are a couple spots were they can go longer I see that my humidity has climbed up to 50% so I will be running the dehumidifier for the rest of the grow, aiming at 40% RH May 13th Switched the nutrients to start flushing today. I used 15 litres of water and 40m/l of Florakleen = 0.38 m/l PPM > 100 and PH of 6.1

*********************************************************************************************************** START OF WEEK The Hawaiian Lion (right) and Tricho Jordan (left) are the two plants that dominate the face-on tent photos, and for good reason. Each of those plants is twice the mass of either Chimera. The HL is superior in bud sites, resin, and terp intensity, but the Tricho and the good Chimera #3 are both not too far off in resin production and aroma profiles. The weird runt is frosting up too, so we're looking at getting something unique and quality from each. That is, if I don't muck this up. I fed last night, and as part of that process, I mix my nutrients in a four gallon batch at a double(ish) strength. I then add that to my reservoir, which is shut off at that time. This allows me to work in the res, to both get the ppms right and the ph within range. I just use plain water to level off the ppms and then I adjust for ph. What I didn't do last night is TURN back on the flow of water from the reservoir. However, you wouldn't have guessed it from how the plants woke up today (see first image). I normally check the bases of each plant daily, and in doing so today, I noticed that one felt slight dry. All tanks were empty, but all plant bases were somewhere between wet to moist. This is how I spot check, and it's worked in the past. This isn't the first time these tanks have had a catastrophic issue leading to an unexpected no flow sitch. There's a filter that sits between the reservoir tank and the primary feed line. That has unexpectedly clogged on me in the past, but with no deleterious effect to the grow. That was caught within a day as well by testing the plant bases. I don't blame autopot for either event. Obviously, last night I was a baked potato and just forgot a step. The clog is because I use yucca in my mix, which is an organic material that over time in the reservoir leads to build up. I'm afraid to introduce hydrogen peroxide into the set-up, so I'm just maintaining my reservoir by cleaning it fully every other week for now. I don't want to kill off the bacteria in the environment. I'm also using some fungus, too, so I'd rather promote coexistence of a microbiome than serialize it, especially considering the plants seem to be on pace. **************************************************************************************************************************************************************** END OF WEEK Shit! I've got a herm. I've found four nanner clusters this week, all on the lower third-ish of the Hawaiian Lion. Someone, thankfully, spotted it in the purple flower pics. Turns out, while super fun to look at, those sweet violet flowers turned into harbingers of mother fucking doooooommm. I've never seen this before. I guess I've been fortunate, but I've also never had a camera this capable before either. I had no idea how small these pee pee's were. I guess I was expecting girth, but shame on me for not knowing. I rapidly learned as much as I could over the last two days, and I've come to the conclusion that I may or may not be screwed. The consensus on my situation ranges from either burn my tent down to thank ja for the blessings of feminized seeds. We're riding this baby out. I think I have fifteen to twenty days left and I think these little nanners might have been in action for ten days, hopefully less. I don't know what kind of damage will be done in that time, but honestly, I'm not too worried. While disappointing, my use case is a personal supply of bubble hash and flower rosin. If it's seedy, I'll wash most of it. I don't know what caused it, but I'm thinking a light leak or genetics. The environment is dialed and that plant hasn't shown one sign of anything less than vigor throughout. The spots that developed the purple flowers (lower bottom half to bottom quarter) are all in the vicinity of where I found the herms (four locations) and these locations are close to the edge of the tent along the zipper. I'm vigilant about keeping my tent and grow space in order, but a light leak can't be ruled out. I'll have to test that after the harvest. The herm flowers are minuscule and I'm surprised I found them. The camera was a great tool in this case. I sprayed the areas that I removed the nanners and then dried it, but for what it's worth, I think the damage was already done. That water bit felt more like ritual, but I'm still feeling optimistic that I'm not totally hosed.