The Grow Awards 2026 🏆
Likes
Comments
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We're getting close! These buds are getting absolutely caked under the MarsHydro..you can tell these plants are going to be killer...I haven't pulled the glass out to inspect this week but last week we were only about 20% cloudy, probably 2 more weeks if I had to guess..flushing these seems to be tricky, we've been using water only for approximately 12 days and their color refuses to fade, some are still a little glossy..I think we're going to start watering these every other day with a gallon each until they're finished, harvesting anything that dark has never been good. We have a few plants lined up to flower the day these come down (White Widow likely) ..every Banger clone taken in week 2-3 of flower are growing and of good size now, we'd like to put a few outside this summer ... Not too much else to report, its been an awesome week, thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
59
Share
Gente,sono arrivato alla 6 settimana di fioritura,per fortuna sto riuscendo a debellare sto cazzo di ragnetto rosso...e tutti i fiorellini maschi che stavano spuntando...al momento sembra che non stiano più facendo sviluppare,ne nannars ne fiori completi di Maschio......il che è buonissimo 😋...spero riuscire a portare a termine bene la mia terapia, altrimenti mi ritroverò (ma di molto nellaCACCONA...MERDA!!!)..MA no! sono positivo e quasi sicuro che sarà buonissima 😋
Processing
Likes
31
Share
@NorCal311
Follow
11/11/19 - All is good in the hood. I love comming back from a couple of days away to see how they look. I did dome defoliation last nigh. Took off some lower branches and leaves. Mostly spindly branches. They are loving the feedings. 11/12/19 - I figured out something tonight with my lighting. I think I have it too low since the plants that right under the light are getting a little bleached and are a lighter green then the plants that are not directly under the light. So I moved it up as far as it could go w/o modification. Let's see what happens. 11/13/19 - From the responses to my question that I received from the pros today, I moved the light back down to 24". 11/14/19 - Did a BUNCH of defoliation tonight. With the SOG it was hard to get under everything. I opened the tent all the way and crawled inside to see so many little stragglers. I hope they do not get shocked too much. I also posted a new vid tonight. I need to do some better lighting next time I will try my headlamp. 😀
Likes
27
Share
Day 35 to 37 is showing rapid hydroponic growth. The roots are getting very dense at the bottom of the container. There is much less tendency for the roots to grow up into the available space. This makes it more difficult to crack loose and raise the root mass from the bottom of the container.
Likes
17
Share
All week I have been doing root flushing
Likes
Comments
Share
@yNo77
Follow
Week 9 is still going, the next days i upload some pics of the Strawberry Cough too. And more close ups I Stopped with biobizz scheme now and give only water, maybe it was the last time watering dunno now. Strawberry Cough is strong really Sativa pheno and pretty foxtaily this week :D She was the last in germination and pretty slow early on
Likes
6
Share
@colla69
Follow
Started 3 days ago from clone. Started LST today, also removed lower branches to encourage growth.
Likes
20
Share
It is getting real bushy in there and i have some thirsty plants. Tent is getting pretty packed and the stretch is on. I might have to water almost everyday, I suspect them to be on the edge of rootbound. Should have went with 14 liter pots or might even 18. Smell is amazing and they are starting to get sticky when i pick fan leaves. Defoliation is coming at the end of next week tho. But it is really bushy i have been picking tons of leaves so far. Tempted to strip them sooner than 21 days into flower but we will see.
Likes
1
Share
Medicine is expensive and, luckily, I am now able to grow my own where I live. I started growing in this 2x4 Gorilla Lite tent and "piece-meal'ed" my setup together. I started with one Mars Hydro TS1000 and was fortunate enough to get a second one before I started flowering. I used a 6-inch AC Infinity fan for exhaust and a 4 inch AC Infinity intake fan. Using a Gorilla carbon filter and it works great.. I added an Exhale CO2 bag at this time not really realizing that it wouldn't do much good for a few weeks still... It's impossible to find oscillating clip on fans where I live so I had to make do with some non-oscillating fans. Grew in 100% Purple Cow Indicanja soil and did not give ANY nutrients during the vegetative stage (they did just fine). I probably under-watered versus over-watered for quite some time as folks at the friendly local grow store kept telling me that I'd inevitably overwater at some point as a first time grower so I waited a long time in between watering fairly often...
Likes
58
Share
Hi everyone ☺️. Today the New Aeroponic Diary begins, as before with the wonderful variety Gelato from Zamnesia . This time I planned to leave the full 8 cuttings instead of 3 as in the last run. For test purposes I would like to give a very short vegi time this time. To be precise, I would like to switch them to flowering a few days after rooting. Since the growth is extremely extreme on Aero, I think that a few days will be enough to get 8 little trees 😋. Of course everything is documented and uploaded. Today the cuttings were cut, brushed with clone gel and placed in the aero system 😃. Of course, the entire system was cleaned very time-consuming with disinfectant after the last run, and all seals, pumps, etc. were checked for their function, so that the new run could start today 👌👍. As with the last Aero grow, the Canna Aqua range 😊 serves as nutrients. I wish you lots of fun when you start the diary, stay healthy 🙏🏻 and let it grow 🍀👌 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧
Processing
Likes
54
Share
Easy to grow, heavy - heavy dense flowers. didn't weight wet but so far has the most mass. 22 Cola's, some as big around as a baseball and about 9" long.
Likes
5
Share
Zweite Woche im Oktober, das Wetter wird immer unbeständiger, die trychome sehen gut aus - Zeit für die Ernte. Ich habe erstmal einige Fächerblätter ohne Harzbesatz entfernt und den Rest zum trocknen aufgehängt. Aufgrund von Platzmangel teils in Umzugskartons und teils im Netz. Nach einer Weile habe ich die Blüten dann vom Stengel getrennt, Manikürt und ins Glas verfrachtet. Aufgrund der Menge war ich bei der Maniküre nicht all zu penibel und habe auch einiges zur späteren Weiberverarbeitung im Eisfach gelagert.
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
45
Share
Topped the ladies on day 22. Breakpadbreath is geting shoots like crazy, zake ist more bushy but looking great, pinkruntz x Hollywood had a lil deficiancy and needs more nutriens than the other two but now we have Everything under Control again. Pink Runtz x Hollywood already smell Crazy! In the next few days i will put them in 4gal fabricpots.
Likes
21
Share
Recovered from the topping and defoliation well. Responding to bondage well. Began Biobizz nute feed at half strength. Just letting her do her thing and flower when she is ready.
Likes
5
Share
As December is near the growth is slower than would like but is still thriving with more stretching happening for the side branches and the mini side branches start to stretch as well one side branch I recently topped is recovering at a decent rate hoping for some start of preflowering signs within the week or 2
Likes
38
Share
@Suprmoux
Follow
On this beautiful monday I reveal to you the evolution of these wonderful Black bud 😇. I am waiting with excitement to prepare them for harvest, they are so close. I have tried as much as possible to present to you their details and colors which are as close as possible to the view I have here in front of me. I'll leave you with this update and come back for the serious stuff 🙌✌️👨‍🌾.