Likes
Comments
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 04/16/22 😻 Week 9 and almost ready for the chop!!! 🐱 ✂️🌱..most of the plants are finally starting to flush out, this will be week 3 of PH water only..1 of the 4 plants is still pretty dark so she's getting an extra gallon every watering. I'd say we still have a few weeks left but we'll inspect trichs again soon be sure. The MarsHydro is killing it! This is only our 2nd grow using this light, if you're hung up on 4x2 lighting, just buy one, they guarantee massive, resin coated buds with minimal effort.. I honestly wish I had discovered it before all our other LED purchases but live and learn ❤️🌱 ... Something interesting to note, the plant with the split main stem has made twice the amount of frost, this is at least the 4th time we've seen split stems lead to this type response..It got us thinking that maybe there's some merit to the nail trick from the 90's but idkl (please comment if you have any information on this) ...it could all be coincidence but it's compelling imo.. ..Not too much else to report, its been a great week! Thanks for dropping by and happy harvests everyone!!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
8
Share
GOOD WEEK 4 EVERYBODY 😎 !!!! Starting today Week 4, girls are pretty well since last week, the problem of development was because i had the Humidifier to closer this two girls and very high humidity. All the system controlled by --> GROLAB + modules: 3x irrigations a day 400ml total 4x day CO2 until 1000ppm, with light ON Nutrition: REMO Nutrients entire line Thank you all, have a Aswome WEEK. Regards, _GrF_
Likes
30
Share
@Ts1Ko
Follow
Look at her flowers 🤩 they are so attractive 😋🤤 can't wait for her to finish 😬 Other than that everything looks nice. No signs of any kind of dis balance ✌️
Likes
5
Share
Back two are gorilla zkittles day 73 not ready just yet I don’t think Cinderella looking like there nearly ready day 67 🤔
Likes
11
Share
@GrowSmith
Follow
Starting strong, need to and alternative way of watering as I was using a jug and some of the soil sunk which made the stem bend down a little. This was quickly corrected A few changes on 27th I removed the oil heater that was really to big for the size of the tent. By doing this alone I could bring the light closer which is the reason for the slow growth. I also bought a humidifier as I was manually spraying the tent and now I can keep the levels up all the time I could now either use a smaller fan heater in or outside blowing through intake vents (without drying the plant up now I have the humidifier) or…… I could put the oil heater on outside the heat and insulate it
Likes
41
Share
Gave more Sucranat frying leaves and light burn. Finishing up Forbidden Runtz soon as she is chucky. Hoping she'll put on more weight, if not oh well. Sour Stomper is catching up and feeding more now. She's starting to fill out a bit. She's still 6 days behind her sis but doing alright.
Processing
Likes
5
Share
@Yatele
Follow
I came back from holidays to realize that I overwatered my plant and mismanaged the aeration and ventilation of the box. The plants grew so much that the box got too full. I had to prune the top of the moby dick that was touching the lamp. Most plants started to loose some leaves from the bottom. Not a big deal, I was planning on defoliating anyway. Worse, because of the lack of airflow, the plants are super flimsy and i broke a few stems haha. On the video above you can see the repair i've attempted. I bought two more ventilator to improve airflow and attached and repositioned the stems thanks to the bamboo sticks.
Likes
8
Share
@Bryankush
Follow
Giorno 1 bene ragazzi dopo la prima settimana di fioritura: posso dire di essere veramente contento di come stiano crescendo e di come hanno reagito alle tecniche che ho usato su di loro, sono veramente mostruose!! Sicuramente le piante più grosse che abbia mai fatto, ora procediamo la fioritura giorno per giorno con calma e continuando a curarla e sperare in una fioritura bella ghiacciata😁, annaffiata con 2,5L di acqua Giorno 7 annaffiata con 2,5L di acqua
Likes
Comments
Share
@Budtoker
Follow
Bud's don't seem too big yet. Took a while to show pistils once I'd switched to 12/12 so hope they're just a little slow. Plant growing in soil is smallest but has fattest Buds.
Likes
2
Share
@Ninjabuds
Follow
It's a nice change of pace to have these warmer temperatures, even if it's not quite spring yet. Low 40s during the day is a lot more comfortable than what we've been dealing with lately. Hopefully, this is a sign that spring's around the corner. My Skunk Apple plant sounds like it's finally getting on track. After a rough start, it's good to hear things are looking decent. Hopefully, it'll keep looking better and better.
Likes
10
Share
@santope
Follow
Hello Week 16 Just begining of week 16 5ift week of flowering Feed them 2twice a week with BioBizz Buds forming really fast an smell its intensive..next week i set a filter up I have really hard to get huminidy becouse its hard raining outside from couple days but fans run on 200% See ya
Likes
21
Share
@m0use
Follow
***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Everything is looking good on this plant this week, it has a different growth pattern then the others in the tent, its way more bendy and lengthy. When I place the steel forks on the stems to keep them from growing up this strain will go all noodle like and bend more fluidly then all the other plants. its like spaghetti or some other pasta related wet noddle thing. Still giving them a 2:1 or 2.5:1 grow vs bloom nutrient. Its helping with some of the pink stems from last week. Feeding strength is up .2 point to reach 900ppm or aorund 1.8EC will leave it here fro the remainder of Veg. Prob will do for 2 more weeks then flip to flower as I just topped them and want to give them some time to recover. NPK ratio of 7-7-14 1:1 equal parts grow/bloom. Grow=8-4-15 Bloom=6-10-14 Boost=1-15-30 "not yet used it yet" Also took some clones from the plants as well, took two main cuttings from each plant, forgot to do the one so its not shown in the first video up the updated clone pics later in the week. If any of these impress me then the clones will go outside and grow there all year for a extra special harvest. Or I'll give them out to some friends and family maybe a little gorilla gardening project, but I will wait before getting ride of them all as I'm still kicking my self in the ass over the Blue Cindy loss. really liked that plant and wish its clones I gave out where still aorund. Lights doing well. The V1 spectrum is good on the medic grow mini sun-2's 240w. No issues so far, dimmed at 80% till flower is initiated then up to 100%, Will test out 13/11 I think as the schedule to give them some more photons for an extra hour vs 12/12 . Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ Facebook: https://www.facebook.com/medicgrowled Twitter: https://twitter.com/medicgrow Instagram: https://www.instagram.com/medicgrow420/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow
Likes
6
Share
@Hanibert
Follow
Pb#3 let leaves hang a little bit but looks a bit better now. Some of the Poppin Bottlez allready reaking of oranges.
Likes
52
Share
Week 6 Flower Up until flush, she was only given PK, sugars and sweeteners, and the microbes (listed above). Everything else has been stopped to ensure a proper flush. She started her flush on Day 40 as I want to get a nice fade on her after a long flush. My girls are in coco and perlite, in fabric pots sat on benches so they dry out within 2 days. Because of this I can flush a lot of water through them without overwatering. Infact, the amount of water I put through them doesn't make a difference to how quickly they dry. Good air movement around the pots also helps them dry, and stops any stagnant air within the lower half of the tent and within the plants, preventing any moulds. When flushing, I first feed just enough water to create a run off into the tray so I can read the ppm and pH value. Doing this lets you know how your plant has been performing; whether she's been way off in pH and locked out by having a high/low pH and high ppm, or if she's been doing just fine with a pH range within tolerance and around the same ppm value or less than you've been feeding. This girl was in perfect health, with a good pH and ppm. After that, I flush up to 30ltr and then take a second reading from the last bit of run off. The ppm is the main thing I look at this time, to see how low I've taken it from the flush. Personally, I find the girls fade much sooner, and more overall by doing a bigger flush as it takes almost all of the nutrients out of the coco within a few days. That leaves the plant with nothing but her own stored nutrients to feed on for the next 2+ weeks. A better flush means a better, cleaner smoke. She's stacked up and swelling by the day with huge buds. Not the frostiest strain I've ran, but still covered in trichomes and extremely strong scented. She smells of mixed berries and grapes 🍇 I can't wait to try! Thanks for following and happy growing! 🐺
Likes
10
Share
6/19/2024 this plant is short and stinky as fuck even as a cutting. Excited for this next run I'm doing. The last clones from this nursery, were the rs11 and purple octane and those were phenomenal. Let's see where this goes yall 6/25 been staring at her trying to envision how to go about training or topping. She's short and the lower branches are fairly prominent and reaching close to main stem. I will probably Top her after she starts growing regularly and gives me some more to work with.
Likes
11
Share
*03/01 - Week 8 (Week 4 flower) - Heavy Flower Fuel and Cal mag every other day - 18/6 light till harvest- Colas are getting heavy and terps coming in nicely - Lite defo*
Likes
1
Share
Start of week eight of flowering. Wish I had more time on training these. Trichs are crazy on them. Just got to busy and need to trellis earlier first week of flower. Terps are crazy and getting better definitely some good beans to get.
Likes
14
Share
Enjoyed this run. Ready to harvest in about 1 and a half weeks, I actually have seeds in a couple of the plants. It happens, this is my first indoor grow so, need to get my hand on some new genetics
Likes
16
Share
@70x70
Follow
I wasnt home much for 3 weeks starting this week so i dont have any idea about the exact conditions meanwhile but in the end it was more humid and hotter since i dimmed the light to 100%. Above/next to the lamp the maximum was 32C and at the leaves max 30C before adding airflow to the lamp. This brought it back down about 2C.
Likes
6
Share
Questa settimana ho notato un piccolo stress alle foglie della cima centrale (questo stress credo sia dovuto alle temperature elevate )