This week started off a little rocky but I’ve gotten it under control. I guess I didn’t feed her enough nutes over the first few weeks and she started showing a calcium deficiency. I just added Cal Mag and that brought back to life. You can tell from the pics that she was fading into a lime green shade. It could’ve also been a nitrogen deficiency as well that was going on. Other than that she’s growing fast and getting bigger every day. But I hope everyone has a wonderful Christmas and Happy New Year! Enjoy the holidays, be safe, and happy growing! ✌️🏾

Wasser, Sonne, das war‘s.

I've been feeding and pulled a few fan leaves. They are all different heights and getting really tall despite only being in two litre pots. The tallest pheno is already showing red buds.

took out 8 litres out of the system and added 8litres rainwater. also added extra airpump (each plant has now 2 airstones) plants seem to grow at normal speed now. another week before they go in flower.

7/5/25 plant is stretching. Not sure if its preflowering or just being outside in a bigger pot. Im just going to let her grow naturally and see how it turns out. I may end up with just one diary of each strain at the moment. But im also not sure whether im going to be doing indoor or outdoor based on personal circumstances.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ok..i'm an idiot 🐱🔫 ..they we're clearly overfed last week and without thinking i gave them our usual "full strength" bloom shot as we decided to flower her (no more space)..she's not too happy with us atm, her top leaves are curling very hard..We intend to give her PH water only until she comes around some...normally we wouldn't flower a plant in this condition, we'd wait for her to straighten out and then flip however, space is critical atm...we moved her to the 3x3 to flower with a couple tiny White OG plants...she's a big plant, we have some room for stretch but not a ton, this might interesting in another week or 2 lol...we setup a dedicated exhaust for this tent and temps have been great, lots of air movement...We'll upload in a few days if her condition changes, thank you as always for taking the time to read and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

F1 youngest of them all, will try to just leave it be without lst or topping or anything... Maybe.

I believe we are about to move into the flowering stage. I see a bit of the white hair. I've given them probably their last mixture of grow+CalMag nutrients this week. We'll see how they are looking in the coming weeks and I'll switch to the flowering nutrients next. They are well over 4ft and 3ft tall (excluding the pot) and they look like they will be huge! Looking forward to the next stage.

Week 4: Late Flowering Stage Welcome to the eighth weekly update of our cannabis cultivation journey in Germany! As we enter the fourth week of flowering, our strains—Pulp Friction, Cookies Haze, Eleven Roses, Poddy Mouth, Critical Lemon Kush, and OG Kush—are approaching their final stages of development with impressive bud growth and resin production. Key Developments: 1. Bud Maturation: - The buds have continued to swell and mature, becoming dense and resinous. - Trichomes are now fully developed, with milky-white heads and some turning amber, indicating the approaching harvest window. 2. Environmental Management: - Maintained stable environmental conditions with temperatures between 20-26 degrees Celsius and humidity levels around 40-50%. - Continued to ensure adequate ventilation to prevent mold and maintain airflow around the plants. 3. Nutrient and Watering Management: - Adjusted nutrient levels to support late-stage flowering and maximize resin production. - Monitored soil moisture carefully, maintaining optimal hydration levels for the plants’ roots. 4. Final Care and Maintenance: - Continued to support the plants’ structure with stakes and ties to prevent branches from bending under the weight of mature buds. - Removed any remaining yellowing or dead leaves to promote airflow and redirect energy towards bud development. Growing Medium and Setup: - The plants have thrived in a blend of living soil, coco coir, perlite, and clay pebbles, enriched with mycorrhizal fungi cultures for enhanced nutrient absorption. Next Steps: - Monitor trichome development closely to determine the ideal harvest time based on desired effects (clear, cloudy, or amber trichomes). - Prepare for harvest by gathering necessary tools and supplies, such as trimming scissors, drying racks, and storage containers. - Stay vigilant for any signs of pests or diseases as the plants near maturity. Stay tuned for next week’s final update, where we’ll discuss harvest preparations and the culmination of our cannabis cultivation journey. Feel free to ask any questions or share your experiences in the comments below!

H2O Algas Enzimas

New week for the imperium X She definitely a week behind the other's but still growing i will be leaving this one alone topping and LST wise it's already smaller then the rest so i let this one just grow how it is Made video today enjoy 🤘🏻 See you next week Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.

Removed bloom from nutes. Last feed on 31st. Plain water twice spaced over 2 days Can't wait to harvest this baby. 1 month is worth the dry n cure!

New week starts! ☀️12.10.2023 Pre-flowering state begins! There are white stigmas on the top of every plant. My garden is full of nice green bushes. But I'm still worring about they tall: maybe I'll use a SCROG net later, we'll see. Another deal is a roots coming from lower part of trunks. It's because of 80% humadity in the box bottom. I should mount one more ventilator to aerate it. ☀️14.10.2023 78cm tall plants are too large for my box. I considered to mount a SCROG net and another 100w LED lamp to bend them down and give more light. Pre-flowering goes on...

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Unfortunate Week... Honey cream had a couple of "budrot" spots forming due to droplets of water dripping into the flower and not drying (99%humidity nights)... Thankfully those buds were cut down and she doesn't seem to be producing any more "budrot".. Apart from that, the smell is amazing on her. Power Flower is going nicely too, but seems to not have too much smell...

Beautiful pumps

Day 84 Week 6 flowering 👍🍀

She's developing very healthy and strong, she's responding very well to tje training techniques and she looks fantastic right now, she's enjoying life! Hope you guys enjoy my work! ❤️💚💎

ok so its been about another 2-3 weeks flowering is going well ive added 2 top feeds of down to earth flower and rose mix 3 tbsp to each the auto and the veg 2tbs to mother clones and an a half feed few days back. cuts this round were signifcantly stronger, and longer. Well for the Gorilla Zkittlez, the Og is very slow in the vegative and i took 3, fairly larger clones, a bit too large for the propagation dome so they're cramped.I soaked the rapid rooting pods in a light compost tea to experiment ( ideas from youtube). Planted a total of 7 more seeds due to unsuccessful cloning and desire to explore variety, 'tis the spice of life, 1 x Auto colorado cookies 1 x og kush 3 x amherst sour diesel 3 x skywalker ghost (emerald seeds) new dairy coming from them after a solid week or 2 of steady growth