Cut the net down now as all stems hardened in place. Had a reshuffle and as the Dos Si Dos much taller i have moved lights to top and propped my other 3 up on boxes to level the height more. Really pleased with this plant so nice and short but spread with lots of tops, smells really nice cant wait to see how this fattens up. Had to do a little late trimming to open up bottom just removing little bits and leaves well under the lights. Done this mainly to help with the airflow and just to give plants little more space as i suffered a little rot on my first grow as was cramped and struggled with humidity however got good dehumidifier and plenty of airflow so fingers crossed it stays well away this time. Overall plant looks really strong and healthy cant wait to see how these last 4 to 5 week turn out.

Día 75 y último de vida para esta hermosa nena. Me encuentro disfrutando de la manicura y hermosa cosecha que estoy obteniendo con esta planta, mi casa está impregnada por una fragancia dulce con toques tangie. Ahora cortaré por ramas y colgaré en la carpa de cultivo donde se secará por aproximadamente 10 días con humedad y temperatura controlada. Esperaré a curar y probar bien todos esos terps para poder dar un buen informe de cosecha pero hasta ahora todo se ve muy bien! Buenos Humos 👽

stretch is going well! buds are starting to get fruity! Calyxes are already getting typical LA Confidential look

This week they did more stretching as you can see the one on the left is into and above the light! I can't believe this but I'll role with it! I slowly defoliate just a little here and there between watering and filling the humidifiers. They really like to eat! Also, something to note that is they love the humidity as well as the warmth. I had to clean the outside of their grow bags this week. To my surprise the roots are starting to come out the bag! I can't believe it but this is awesome! Now they'll die due to contact with the air, and in return get bigger to take in even more nutrients! As predicted they fell off because their little pieces are on the floor. Well I fed and watered them daily. Like normal whenever I fed them either nutrients or soil amendments I made sure to water the plants with plain pH balanced H2O the next day in order to flush them. Then I would do any soil amendments if needed. After that plain pH balanced H20 and then you could do another fertilizer nutrient for them. After that pH balanced H20 and then you return to the soil amendments if needed. That way every other day you're feeding soil then pH balanced H20 then nutrients then pH balanced H20. This will allow you to monitor pH imbalances, nutrient burn, or any subtle changes you need to make you can catch it before it happens hopefully!

All good here. Except for the fact that I might not be LSTing correctly, oh well this is my first grow so...😺👍

The Runtz beauties have made it through and are thriving. I switched to spring water to add a bit of ppm to the mix, while still getting a PH of 6.4-6.5. I mixed a spray bottle with 1 ml of Sensi Cal/Mag and .5 ml of Bonnie from Cronk nutrients. Used this mixture sparingly, misting the seedlings in the morning and night, trying not to overwater. Also used as a foliar spray just before lights out so as not to burn the plant. It been very cold and dry here, I had to add a 2nd humidifier to the tent to get the RH where I wanted it, hovering between 65 and 70% RH. The humidifiers I have are 1 gallon each and I have to refill daily! Temps has been hovering around 78 degrees and get to about 70 in lights out with the small heater I use during the winter months. Overall, they are progressing well, I’m hoping to get a few weeks of Veg time before they start to flower. 🇨🇦👊❤️

News from the new smoking review Let's go to the flowers. As hard as Carrara marble, Michelangelo as a grower would say that everything was already predictable in the seed, he only transformed the shape, making it divine. Just like his marble blocks within which he already envisaged his magnificent works. And indeed this is a work of art of cannabis genetics that we will never tire of idolizing. As we have said several times, the mums are super, the flowers have a lot of King's Tart mum in terms of hardness and weight, they seem to weigh 30 grams but there are 64-odd flowers that are really heavy and very hard as those who know like it... The new smoking review of Growdiaries isn't bad, I'm trying to understand how they're organizing it but I don't mind at all, they'll be correcting a little bit but the site seems to have improved. From the harvest week Tarte Tatin is a superior level genetics, I'm really not joking about this thing you can see with your own eyes what wonderful flowers it makes. The plant has arrived at the end, I harvested it at the beginning of the harvest window, the pistils were very ripe while the trichomes asked me to stay a few more days, but the plant next to it has got mold on the buds and I won't risk this masterpiece not even as a joke. Don't give up even 0.1g of this beauty. I must say that the American lineage is evident a lot. Already the mother King's Tart had descendants from the legendary LA Kush Cake who was mixed with the legendary Bubba SLush Greenhouse. Here we have taken a further step towards perfection by adding a marvel from a breeder I know from the masterpieces I see published on Instagram, Compound Genetics. In truth, all the conditions were there and I would have torn my face off doing harm with these genetics. The resin is in industrial quantities, look at the photos there is a real crowd of trichomes on the flowers. The foliage is romantic, the kind that makes you fall in love with the truly blue/purple that also reverberates on the flowers. The scent is a mix of all fruits and something sweet and it makes me go crazy like an unscented pussy that walks past you and winks at you. Actually maybe a little more. Alpha male jokes aside, the stuff here is exceptional and closes the circle having used EXCLUSIVELY and deliberately Green House Feeding, as I have said several times it's a bit like eating at home with your mother or grandmother, you grow up strong and healthy and you is ready for a great future. In my lungs. Maybe I'll offer a joint on New Year's Eve at the latest, I'll take the rest. Sorry for the thousand photos I couldn't stop taking and manage to achieve something. Is a genetic goal of GHSC https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/tarte-tatin/ My favorite feeding at the moment https://shop.greenhousefeeding.com/ Music of the week Radio Nula from Slovenia https://radionula.com/ Music of the week Music for Plants 432 hz https://www.youtube.com/watch?v=3EZqEvMoS3w "I can see the light" https://marshydro.eu/negozio/?lang=it

Not sure how long these have got before they need to be harvested?? What do you think ?

Hello everyone week 5 of flower has passed for this Cinderella Jack auto 👸🏼 For the feeding schedule i stopped feeding Power Roots and Pure Zym and started feeding Green Sensation 0,5/l Mars hydro SP-6500 power 75% have a great day and wish you all happy growing 😎👨‍🌾🏻

Introduction - Week 14|07 Summary - Ensign's log, stardate 9437.65, Great week of growing! Wow what a good week! Growth in the main tent has all around been incredible! Submitted my first submission to the Global Grow Cup! Filmed a video of the solo cup container (marked with the ticket/order number) that will be used for the competition. Also had to fill and prove the solo cup holds 2 cups of soil. Now I need to root a clone (for the first time), transplant her into this cup, and submit my 2nd entry before the 30th of this month. As far as my first attempt at cloning, have already begun the rooting process! Managed to take cuttings from 3 out of the 6 phenos in the main tent (the first cutting was also my first time topping). Soaked the cuttings for two days before planting them into Coco Coins. So far everything has gone surprisingly well! The clones are now rooting under the propagation dome with the vents fully closed. Will check for roots soon! At the end of the week, growth was just raging! Was planning on flipping to flower in a week, but decided to begin the first week of flower next week! Thus this is the last week of veg. Plan to flip to 12/12 next Monday! Onwards to next week! [START OF WEEK 14|07] ========================================================== Garlic Budder #1 - WEEK 14|07 - Full Veg Wk5 Garlic Budder #2 - WEEK 14|07 - Full Veg Wk2 Garlic Budder #3 - WEEK 07 - Full Veg Wk5 Garlic Budder #4 - WEEK 06 - Full Veg Wk4 06/03/24 → 06/09/24 This Week's Estimated Goals ---------------------------------------------------------------------------------------------- DLI: ~26 mol/m²/d PPFD: ~400 μmol/m²/s VPD: ~1.0 kPa This Week's Meter Readings & Averages [Lights On: 16:00 - 10:00] ---------------------------------------------------------------------------------------------- DLI: 24.56 mol/m²/d PPFD: 379 μmol/m²/s VPD: 0.91 kPa Soil %: [32.7, 37.6, 37.9, 34.1] ========================================================== Day 01 - Monday - 06/03/24 - Total Days: 098 ----------------------------------- Daily Averages [~23:00] - Temps: 80.7°F [27.1°C] - Humidity: 74.4% - VPD: 0.90 kPa - Soil %: [31, 34, 39, 35] ----------------------------------- - [09:57]: Quick morning check! --- #1 is looking a bit droopy, but almost lights off (at 10:00) so not concerned. --- Nice! Mainly wanted to check on #4 and she is looking great! She’s perked back up and looking good! - [23:08]: Evening check. --- Wow! It’s a jungle in here! --- #1 has gotten too big? Nah!? Keep on growing girl! --- #2 is growing and definitely getting bigger! Growth just looking really weird. --- #3 has continued to get larger and is looking quite uniform in growth! --- #4 is growing and looking perky again! --- Even the original #1 and #2 phenos (in the back) are looking good! --- Wow! #4 is really getting close to the light. - [23:14]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [23:27]: Checked the Ecowitt soil moisture sensor data: --- 30% - [CH01 EB1 - Garlic Budder #1] --- 34% - [CH02 EB2 - Garlic Budder #2] --- 39% - [CH03 GFP - Garlic Budder #3] --- 32% - [CH04 FPT - Garlic Budder #4] - [23:32]: Poured 4 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [23:38]: Checked the humidifiers. --- Refilled the 4X4’s humidifier with distilled water. --- Tomorrow, plan to defoliate and start cloning for the first time! --- Going to take multiple cuttings from both #1 and #4 for sure, but still deciding on the rest. --- Getting hyped! Day 02 - Tuesday - 06/04/24 - Total Days: 099 ----------------------------------- Daily Averages [~23:00] - Temps: 81.4°F [27.4°C] - Humidity: 74.3% - VPD: 0.93 kPa - Soil %: [29, 35, 38, 32] ----------------------------------- - [11:59]: Time to film the first entry for the Global Grow Cup! --- Going to be using BuildASoil 3.0 potting soil. --- Filming the video using a stand and my phone. --- This video is mainly to establish the container that the plant will be grown in. Also to prove that the container is a 16oz container and that it can hold 2 cups of soil. --- The ticket (order) number also had to be written on the cup. - [12:36]: Done! --- The video had to be done in one continuous shot with no edits (my original submission does not have the logo). --- There was also a photo that needed to be shot which shows the cup filled with 2 cups of soil (just like the video, the original image submission did not have the logo). --- I think I did everything correctly, but also sent an email for verification of submission and validation. --- Getting hyped! --- [*smokes a bowl] --- Going to defoliate today along with for the first-time, going to take cuttings for clones! --- After a bit of online research, decided to split the cloning process into two days. --- Today going to take cuttings and will soak them in a solution of aloe for 24hrs. Afterwards will change the water out and use straight distilled water. --- Then in a couple days, plan to transplant into coco plugs (Coco Coins) for rooting. --- For optimal results, also be using a rooting hormone (Clonex). --- Well.. Here goes nothing! - [17:01]: Evening check. --- Wow! #1 is looking huge! Her main top is stretching above the lower canopy which is continuing to bush out. --- #2 is growing along. Growth is gnarly and a bit droopy, but she’s getting taller! --- #3 is looking great! Still a bit small, but she is continuing to get larger. --- #4 looks like she needs a watering. --- Both plants in the back are also looking surprisingly great as well! - [17:05]: Checked down both fill tubes. --- Both reservoirs were completely dry! --- As far as today's defoliation, going to leave #2 and #3 alone and will focus my defoliation and cloning on the rest of the plants. --- This will be my first attempt at cloning, also going to try topping for the first time today. --- No pressure Ensign. What can possibly go wrong right? - [17:27]: Time to start the cloning and defoliation process! --- Filled a measuring cup with 3 cups of distilled water. ------ Added 3/4tsp of Horticultural Aloe ------ Added 1 more cup of distilled water --- Mixed the solution and poured an even amount into three separate solo cups. --- Made sure to mark two of the cups (#1 and #4). The unmarked one will be for any other clones from amongst the 6 phenos (if any at all). - [17:43]: Time to top and defoliate #1! --- Using a pair of brand new trimmers (AC Infinity), --- Gently cut the main stalk to even out the canopy. --- Then trimmed and cleaned most of the nodes leaving the top node or two. --- Also trimmed the leaf fingers a bit before placing the top cutting into the cup of aloe solution. --- Now for the rest of the cuttings! --- [~45 minutes later] - [18:32]: Managed to finish defoliating and cutting the rest of the clones. --- Took two more lower cuttings from #1 (3 clones total). --- Took 3 lower cuttings from #4 --- While defoliating, decided to try and clone the original #2 pheno as well. Took 4 small cuttings. --- Similar to the top cutting, trimmed and cleaned each lower node for each cutting before placing them into the cups. --- Before finishing up the 2nd cutting, I noticed the first cutting (the top cut that was also trimmed) was drooping. --- So I did not trim and the leaf fingers for the other cuttings. --- In total there were 10 cuttings taken for potential clones. --- My main focus was to take cuttings and to clean up all the lower growth from both #1 and #4. --- Defoliated and cleaned up the back original phenos as well (also trimmed back the cover crop). - [18:35]: Temporarily placed the cuttings onto the floor of the 4x4 tent. --- Took the trimmings (about 3 cups) and spread them onto the top mulch of #1 and #2. --- Time to set the environmental controls for the 3x3 veg tent. - [18:43]: Within the AC Infinity App, --- For the Veg Tent [3x3] controller, --- Adjusted the 'Vegetative [18/6]' Schedule for the grow light. ------ Set the Mode to ‘On Mode’ ------ Set the START/END times to 04:00PM/10:00AM ------ Set the MAX to 1 --- The IonBoard S33 is now utilizing around 60.8W (at intensity 1 out of 10). --- Adjusted the 'Vegetative [18/6]' Schedule for the exhaust fan. ------ Increased the Humidity’s HIGH trigger value from 81% to 87% --- Adjusted the 'Vegetative [18/6]' Schedule for the humidifier. ------ Decreased the VPD target value from 1.5kPa to 0.8kPa - [18:52]: Moved the cuttings into the 3x3 veg tent. --- It begins! I think. --- Going to let these cutting drink some aloe for a day before switching to straight distilled water. --- Hmm. Could be the white floor of the 3x3 veg tent, but have noticed the S33 has a whiter spectrum whereas the FC-6500 seems to be warmer in color. --- Anyways, - [18:58]: Poured 4 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [19:06]: Filled a pump sprayer with 5 cups of distilled water. --- Focused mainly on the straw mulch of #4. --- But also misted the straw mulch for the rest of the plants a bit. - [19:12]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. - [19:44]: Going to be using Clonex rooting gel before planting the cuttings into Coco Coins (pre-soaked with microbes and aloe). But before that begins, going to transfer the Clonex gel into a squeeze bottle. --- Gently peeled back the seal on the original Clonex bottle. Just enough make a tiny opening, --- Then slowly and carefully poured the gel into an empty squeeze bottle. --- Also removed the sticker from the original bottle and placed it onto the new one. - [19:54]: Perfect! --- Instead of applying the gel to the cutting, going to be applying the gel to the Coco Coin. --- This squeeze bottle will make applying the gel a lot easier. --- Will take PPFD readings tomorrow. --- Also will change out the aloe solution to distilled water. --- I really hope I didn’t screw things up before they could even begin. --- Don’t die on me ladies! --- Please. Day 03 - Wednesday - 06/05/24 - Total Days: 100 ----------------------------------- Daily Averages [~23:00] - Temps: 81.9°F [27.7°C] - Humidity: 75.5% - VPD: 0.90 kPa - Soil %: [29, 36, 38, 36] ----------------------------------- - [09:40]: Quick morning check! --- #1 is looking a bit droopy, but looking okay. Topping is a high stress technique so going to take some time to recover. Don’t plan on flipping the main 4x4 tent to flower for a good week or so which should be enough time. --- #4 looks great! The defoliation seems to have no effect on growth. Nice! - [09:41]: Also quickly checked on the 3x3 veg tent, --- Nice! The cuttings are looking great! --- No yellowing and they all seemed to have turned up towards the light. --- So far so good! - [22:53]: Evening check. --- #1 is continuing to dominate this grow! She has spread wide and looking incredible! --- #2 is looking gnarly, but getting there. --- #3 is getting larger! But still a runt. By far, her leaves are the darkest of the bunch, but she is still growing! --- #4 looks happy and growing along beautifully! Wow! - [22:55]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [22:59]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [23:05]: Checked on the 3x3 veg tent. --- Ooo yea! The cuttings are still green! Nice! - [23:07]: Took PPFD readings. --- The cuttings were around 121 μmol/m²/s which gives a DLI of 7.84 mol/m²/d --- Nice! These levels are on the lower range for seedlings (~100-300), perfect! I think. - [23:14]: Swapped the aloe water out to straight distilled water. --- Going to let these cuttings soak for one more day before planting. --- Please don’t die girls! - [23:15]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Ooo yea! --- Tomorrow is the big rooting day! Day 04 - Thursday - 06/06/24 - Total Days: 101 ----------------------------------- Daily Averages [~23:00] - Temps: 81.9°F [27.7°C] - Humidity: 75.2% - VPD: 0.91 kPa - Soil %: [32, 38, 38, 34] ----------------------------------- - [16:20]: Evening check. --- #1 is a bit droopy, but growth is looking green and healthy. --- #2 is looking bigger! She’s also looking sort of droopy. --- #3 is growing along nicely! Looking good girl! --- #4 is looking great! A bit droopy but plan to water today. - [16:23]: Checked down both fill tubes. --- EB1's reservoir still has some water. --- EB2's reservoir was completely dry! - [16:23]: Checked the Ecowitt soil moisture sensor data: --- 28% - [CH01 EB1 - Garlic Budder #1] --- 36% - [CH02 EB2 - Garlic Budder #2] --- 37% - [CH03 GFP - Garlic Budder #3] --- 30% - [CH04 FPT - Garlic Budder #4] - [16:30]: Using a pump sprayer, --- Misted the straw mulch of #4 with 6 cups of distilled water. --- Focused mainly on the straw mulch. --- Also misted the straw mulch of #3 (in the grassroots fabric pot) a bit. - [16:43]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. - [16:52]: Checked the Ecowitt soil moisture sensor data: --- 56% - [CH01 EB1 - Garlic Budder #1] --- 44% - [CH02 EB2 - Garlic Budder #2] --- 40% - [CH03 GFP - Garlic Budder #3] --- 45% - [CH04 FPT - Garlic Budder #4] - [17:01]: Took general PPFD readings. --- #1 was around 379 μmol/m²/s which gives a DLI of 24.56 mol/m²/d --- #2 was around 333 μmol/m²/s which gives a DLI of 21.58 mol/m²/d --- #3 was around 293 μmol/m²/s which gives a DLI of 18.99 mol/m²/d --- #4 was around 378 μmol/m²/s which gives a DLI of 24.49 mol/m²/d - [17:09]: Took the weekly height and light distance measurements. --- #1 was about 21" tall. --- #2 was about 13.5" tall. --- #3 was about 9.5" tall. --- #4 was about 19.25" tall. --- Hmm.. - [17:19]: Adjusted the right oscillating fan a bit. --- Re-angled the CloudRay S6 oscillating fan upwards. Been noticing that the air has been hitting the tops of the plants so easing off a bit (#1 is still getting hit, but she’s huge so not too worried). - [17:23]: Back to the measurements! --- #1 was about 9.5" away from the grow light. --- #2 was about 17" away from the grow light. --- #3 was about 17.5" away from the grow light. --- #4 was about 11.5" away from the grow light. - [17:46]: Checked on the 3x3 veg tent. --- Cuttings are still green! They do look a bit droopy but no signs of yellowing. --- Okay! - [17:55]: Time to begin the rooting process! --- For my first attempt at rooting, going to be using Coco Coins pre-soaked in saponins, microbes and aloe. --- To further help with rooting, going to also be using Clonex rooting gel. --- Filled a measuring cup with 4 cups of distilled water. ------ Added half of 1/64tsp of Quillaja Saponaria Extract [60] ------ Added 1/16tsp of Horticultural Aloe ------ Added 1/8tsp of Mycrobe Complete --- Mixed the solution thoroughly. --- Time for the Coco Coins! --- 10 cuttings means 10 Coco Coins. - [18:09]: Dropped 10 Coco Coins into the measuring cup. --- The coins immediately started to expand. --- A bit too much.. Oops! --- Poured the solution and Coco Coins into a pitcher. --- Added 2 cups of distilled water to the solution (now at 6 cups). --- Great! The coins are pretty much fully expanded, but going to wait a bit longer to fully saturate each coin. --- [~20-30 minutes later] - [18:42]: Great! --- Took the seedling and flood tray from the AC Infinity propagation dome and placed all 10 Coco Coins into the slots. --- Gave each Coco Coin a quick shake to remove excess solution. The coins were not dripping with solution but still pretty saturated. --- Arranged them into 3 groups with the cuttings in mind. --- Also tried to keep the pre-made holes intact. --- Time to inoculate the Coco Coins! - [18:54]: Using a squeeze bottle, --- While keeping the nozzle from making contact with the coco, gently filled each pre-made hole with Clonex rooting gel. Just enough gel to fully cover the hole of each coco coin. - [19:00]: Time to plant the cuttings! --- Gave each cup a misting of distilled water. Focused on wetting the top growth with water. --- Okay! --- To avoid mixing cuttings up. - [19:01]: Starting with the original #2 pheno cup, --- For each cutting, --- Using a pair of clean trimmers, made a final 45° cut about 1/2" from a bottom node. --- Then stripped away and scared the protective membrane below the node before planting. --- Made sure the node was about 1/2" below the surface of the coco. --- To help with planting, while inserting each cutting, gave the Coco Coin a gentle squeeze to loosen the coco. This also helped to ensure the coco and gel was in good contact with the cutting. --- Once the cutting was planted into the Coco Coin, made sure to place back in the same spot (made sure to keep the cuttings in their groupings). --- Once a cup was complete, made sure to keep the label with the group. --- Re-misted the top growth as needed to keep it wet. --- Also wiped the trimmers with isopropyl alcohol in between cuttings (plan to use 10% bleach solution for next time). --- Repeated this process until all 10 cuttings were cut, planted, and in the tray. --- The coco coins fit perfectly into the tray and don’t reach the bottom. Nice! --- The bottom air gap is important. --- Poured a bit of distilled water through one of the empty slots into the bottom of the tray. Just enough to fill the bottom of the tray, but not enough to reach any of the Coco Coins (~1/4cup). - [19:35]: Placed the propagation tray with cuttings into the 3x3 veg tent. --- Placed the first layer of the propagation dome on before giving the sides a misting of distilled water. --- Also sprayed the top of the propagation dome before covering the cuttings. --- Vents are all fully closed. - [19:40]: Placed the bar lights onto the top of the dome before configuring the controller. ------ Set the START/END times to 04:00PM/10:00AM ------ Set the bar light’s intensity to 2 (out of 10). --- Also made sure the propagation light controller’s time was in sync with the Controller 69 Pro. - [19:47]: Took PPFD readings. --- The cuttings were around 136 μmol/m²/s which gives a DLI of 8.81 mol/m²/d --- The PPFD levels are similar to the floor. --- Perfect! --- Going leave the IonBoard S33 on during this rooting process. --- Will check back tomorrow to cycle the air under the dome. - [19:56]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. - [20:17]: Quick night check! --- Ooo yea! Growth is raging and looking perky! --- Mainly checked on #1 and #4 which were looking incredible! --- Keep on growing ladies! Day 05 - Friday - 06/07/24 - Total Days: 102 ----------------------------------- Daily Averages [~23:00] - Temps: 82.7°F [28.2°C] - Humidity: 76.2% - VPD: 0.89 kPa - Soil %: [37, 40, 38, 35] ----------------------------------- - [10:03]: Decided to increase the ambient temp in the 3x3 veg tent. --- Within the AC Infinity App, --- For the Veg Tent [3x3] controller, --- Adjusted the 'Vegetative [18/6]' Schedule for the heater. ------ Increased the Temp target value from 78°F to 82°F --- Hopefully this will help to keep the veg tent at a more consistent temp. - [22:26]: Evening check. --- Ooo yea! The garden is looking incredible! --- #1 is looking perky and just bushing out! Wow! --- #2 is getting big! Growth is weird and leaf fingers are huge! Just going to let her grow. --- #4 is looking happy and growing along like a champ! Nodes are starting branch out and she is turning into a bush! - [10:28]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [22:33]: Poured 5 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. - [22:40]: Checked on the propagation dome (inside the 3x3). --- Ah yea! Looking great ladies! --- Lifted the top of the dome to let some fresh air in for a bit. --- Wow! --- Leaves still look nice and green! --- So far everything looks great! --- Just going to continue on! - [22:53]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. - [11:01]: Decided to adjust the humidifier for the 3x3. --- Within the AC Infinity App, --- For the Veg Tent [3x3] controller, --- Adjusted the 'Vegetative [18/6]' Schedule for the humidifier. ------ Increased the VPD target value from 0.8kPa to 1.5kPa --- The higher VPD level will essentially turn the humidifier off. --- I won’t be needing the humidifier for a good week so might as well save the water. Day 06 - Saturday - 06/08/24 - Total Days: 103 ----------------------------------- Daily Averages [~23:00] - Temps: 81.6°F [27.6°C] - Humidity: 74.9% - VPD: 0.91 kPa - Soil %: [35, 40, 37, 31] ----------------------------------- - [07:40]: Quick morning check! --- #1 and #4 are looking perky and happy! --- Also checked on the propagation dome, --- All cutting still look green! Hyped! - [20:02]: Evening check. --- Wow the garden is raging with growth! --- #1 has blown up! She has clearly recovered and growth is ramping up again! --- #2 is stretching upwards! --- #3 is now the smallest of the 4, but still getting larger! --- #4 is looking incredible! Wow! Growth looks perky and happy! - [20:05]: Checked down both fill tubes. --- Both reservoirs were completely dry! - [20:10]: Poured 6 cups of distilled water down EB1’s fill tube. --- Poured 2 cups of distilled water down EB2’s fill tube. - [20:16]: Checked the Ecowitt soil moisture sensor data: --- 35% - [CH01 EB1 - Garlic Budder #1] --- 40% - [CH02 EB2 - Garlic Budder #2] --- 36% - [CH03 GFP - Garlic Budder #3] --- 27% - [CH04 FPT - Garlic Budder #4] - [20:19]: Using a pump sprayer, --- Misted the straw mulch of #4 with 5 cups of distilled water. --- Focused mainly on the straw mulch. --- Also misted the mulch of #3 a bit (in the fabric pot). - [20:27]: Checked propagation dome (in the 3x3), --- To cycle the air under the dome, lifted the top off for a bit. --- Ooo yea! Everything is still green and looking great! --- Keep on rooting ladies! --- Oops! - [21:45]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. Day 07 - Sunday - 06/09/24 - Total Days: 104 ----------------------------------- Daily Averages [~23:00] - Temps: 81.5°F [27.5°C] - Humidity: 74.8% - VPD: 0.91 kPa - Soil %: [36, 40, 37, 36] ----------------------------------- - [08:18]: Quick morning check! --- Nice! The main tent is looking great! #1 and #4 are both raging with growth! --- Checked on the propagation dome (inside the 3x3) and the clones are still looking green! --- Wow! Everything is going almost too well! Just keep on growing! - [19:08]: Evening check. --- Garden is just exploding with growth! Seems everyone has fully recovered from the defoliation and topping! --- Wow #1 is bushed out and looking incredible! --- #2 is growing really starting to get large! Growth still is funky, but stoked none-the-less. --- #3 is starting to fill in the pot! Getting larger! --- Wow! #4 is getting taller and looks healthy and green! - [19:12]: Checked down both fill tubes. --- Both reservoirs were completely dry! --- Wow the canopy is really starting to get taller and closer to the light. May need to raise it up soon. --- Absolutely surprised how low the light levels have been throughout this entire cycle. Barely moved the light and have not increased the intensity past 2 (out of 10). Less is really more. --- Anyways! - [19:18]: Checked the Ecowitt soil moisture sensor data: --- 36% - [CH01 EB1 - Garlic Budder #1] --- 41% - [CH02 EB2 - Garlic Budder #2] --- 37% - [CH03 GFP - Garlic Budder #3] --- 34% - [CH04 FPT - Garlic Budder #4] - [19:19]: Poured 6 cups of distilled water down EB1’s fill tube. --- Poured 3 cups of distilled water down EB2’s fill tube. - [19:24]: Checked propagation dome (in the 3x3), --- To refresh the air, lifted the top off for a bit. --- Sweet! Still green! Wow! --- Using a spray bottle, misted the top growth with distilled water. - [20:35]: Checked the humidifiers. --- Refilled the humidifiers with distilled water. --- Wow what a week! --- Growth has been just insane in the 4x4 tent! All plants have fully recovered and have just exploded with growth. --- I think it’s time to flip to flower! --- Also, I’m absolutely baffled about how well the cloning process has been going. --- So far no issues! --- Not complaining, but just surprised. Keep on growing ladies! --- If all goes well, should have fully rooted clones soon ready for transplanting (into solo cups of course). --- Absolutely hyped for next week! --- Maximum warp Ensign, Engage! [END OF WEEK 14|07]

Not much to report this week from the garden. All the plants received a top dressing of about 300ml worm castings and 80ml Dr Forest Organic 284 Bloom just before the start of week eight, and will most likely be their last feeding. The plants have stuck to the usual watering schedule of 2.5l every two days. The huge Wedding Cheesecake growing in Coco Coir appears to me to be showing signs of cal/mag deficiency so yesterday I top dressed with Cal/Mag again from Dr Forest Organics. Keeping humidity under 45% has been a battle well and truly lost this week, and has varied wildly and constantly between around 41% and 57% but has been most often found to be around 47%. The battle rages on. I have been defoliating once a week, mainly just removing stuff covering bud sites, and trichome production on all four Bruce Banners has really taken off. After only a fairly light defoliation session, my hands were so sticky they were almost glued together and I rolled all I could remove from my hands into a sausage and smoked it mixed in with my other stuff, but that was only about 1/2 to 2/3rds of what was stuck to my hands, and I have to wash my hands in isopropyl alcohol and soap and fairly liquid 3 times before the best part of it was removed.

Day 21 of Flower 🌸 Girls looking real fire right now — stretch is finally done and the canopy has locked in. Big, chunky colas are stacking up and the tent smells absolutely crazy when I open the door (honest — forgot how sweet flower smell is after a few years off). Quick notes / vibes: Switched to 400W HPS + 300W LED (4k) for flower — you can see the HPS side blasting the fattest colas. The two plants that were smallest under the little LED pre-flip have blown right up under HPS and are now the tallest. Kush Crasher is showing beautiful dark colours from the cooler nights (~17°C). Some big fan leaves are almost black — gorgeous. I did some supercrop & last tucks earlier while there was still room; with the net full I’m mostly done training — one last clean tomorrow/the day after, then I’ll let them fatten out. Watering: still giving ~3 L per plant every 3–4 days — feeding organic BioBizz line + Top·Max, Green Sensation in the mix as needed. Environment: box is in a cold, damp garage so I have to switch the inline off at night to avoid freezing. Running a 150W cabinet heater and a small Peltier dehumidifier (not perfect but helps). Humidity still a fight (keep an eye on it) — big fan circulation 24/7 helps a lot. Plan next moves: 1. Final lollipop / net clean tomorrow — remove any junk under the canopy, open airflow. 2. Stop training after this last tidy; let buds fatten. 3. Keep watching trichomes from week 6 onward and stagger harvests as needed. 4. Push RH down as much as possible in late bloom Strains in this run : Wedding Cake (back-left), Kush Crasher (back-center), AK-47 (back-right), Double Krush (front-left), Wappa (front-center), Detroit Runtz (front-right) — 6 clones, planted 10/10. Running in 20 L Smart pots, BioBizz Light Mix, mycorrhiza, SCROG net @ ~25–30 cm. Feeling stoked — tent is filling out exactly how I wanted. Just gotta babysit humidity and let the buds get dense. Keep it green ✌️🔥🌿

Awesome! Went away for 10 days over Christmas and was not sure what to expect when I got back. Obviously re-potting them and letting them dry out has been effective. I've started adding a little Fish Mix to their water. I don't think they need it but I'll go really slow and try it out on my tomatoes to see what effect it has on them. I'm cautious about drowning them in nutrients as I have no experience with this and don't want to slow the grow down any more than I already have.

Plants were watered on day 4 of week 9, as follows: Lucy: 1 gallon water, pH: 6.27, Height: 22 in. Herbert: 1.25 gallons water, pH: 5.77, Height: 24.5 in. ***Both fed nutrients - 5 ml/.5 gal BioVega (3% N, 1% Phosphate, 5% Soluble Potash), 7 ml/.5 gal BioBoost (1% Phosphate), and 1 ml/.5 gal BioRhizotonic (0.6% Soluble Potash) Plants were watered on day 5 of week 9, as follows: Thin Mint Sr: 1 gallon water, pH: 6.76, Height: 20 in. Thin Mint Jr: 1 gallon water, pH: 6.50, Height: 19.5 in Notes: Thin Mint Jr has nutrient burn and so was NOT fed nutrients today. Thin Mint Sr was fed nutrients at 50% strength 2.5 ml/.5 gal BioVega (3% N, 1% Phosphate, 5% Soluble Potash), 4 ml/.5 gal BioBoost (1% Phosphate), and 0.5 ml/.5 gal BioRhizotonic (0.6% Soluble Potash) (both plants still in nutrient distress - in process of recovery but have some new growth that is greener so improvement is being observed; slowly but surely!) ***Plants ideally would have been transitioned to the flowering phase this week, but due to nutrient deficiencies and nutrient burn on Thin Mint Jr., we are holding off on this transition for 1 week to give the plants a chance to recover from stress.

Next week I will be looking to plant half them in the ground and keep half to flower in the tent once planted in the ground I'll be able to take good individual photos of the plants as I have alot of stains going on inside the tent and I look forward to making some more space again once I get some of the girls planted outdoors

1-11 At the end of the day i chopped her down, did a small wet trim removing some big leaves, and hang the buds to dry. 2-11 Temps: 19.3 to 20.5 degrees Humidity: 55% to 64% 3-11 Temps: 17.1 to 20.4 degrees Humidity: 54% to 66% 4-11 Temps: 18.1 to 19.6 degrees Humidity: 62% to 66% 5-11 Temps: 17.9 to 20.1 degrees Humidity: 56% to 64% 6-11 Temps: 17.6 to 19.4 degrees Humidity: 59% to 67% 7-11 Temps: 17.8 to 19.2 degrees Humidity: 60% to 66% 8-11 Temps: 17.4 to 19.9 degrees Humidity: 58% to 67% 9-11 Temps: 17.8 to 20.1 degrees Humidity: 62% to 64% 10-11 Temps: 18.2 to 20.5 degrees Humidity: 62% to 65% 11-11 Temps: 18.7 to 20.4 degrees Humidity: 57% to 65% 12-11 Temps: 18 to 20.1 degrees Humidity: 54% to 66% 13-11 Temps: 17.8 to 20.2 degrees Humidity: 61% to 67% Started trimming today. 14-11 Finished trimming. I was afraid of finding a lot of budrot, luckily it was only the one cola. The buds are very frosty, the bottom at the base of the branch looks a bit brownish on some buds, i inspected it with a microscope and didnt find any mold or weird things. There are a lot of amber trichomes tho. I think that's why it looks brown like that. It smells and smokes good, so i think its fine. If someone thinks otherwise, let me know! End results: Buds: 92 Grams Small Buds: 18 Grams Trim: 16.7 Grams Total weight of the buds: 110 Grams. I calculated that i used a total of 72.3 watts this grow, that makes it 1.52 grams per watt! Very happy with the end results, and its by far my personal record hahaha.

25/07/25: Another week in the books, and the ladies are progressing—slowly but surely. Bud development is moving along, though the cool and cloudy German "summer" isn't exactly speeding things up. Fingers crossed for a bit more sunshine in august to help ripen those buds and add some extra weight before harvest!🤞🏼☀️ Other than that, not much to report this week—no major changes or issues. Just letting nature do it's thing! 🌿

In questa settimana la crescita é stata veloce anche grazie ai fertilizzanti. LST ho dovuto sistemarlo ogni giorno perché continuavano a crescere nuove gemme e l’apicale tornava sempre su. Il tronco si é irrobustito tanto.