Day 100. ( 60 days of flower ). 4 Jack Herrer and 2 Diesel were Cut and Harvested. They we're hung dry for 10 Days at 45% HUMIDITY and 17 C DEGREES. They are getting Trimmed and will be put in Glass Jarres for the next 3 weeks getting the burps they need. Day 110. ( 70 days of flower ). 2 Gorilla Bomb were Cut and put to hang for 5-10 Days at 45% HUMIDITY and 17 C DEGREES. I will update with Pictures / Yield / Weight / Smoke Grade / Growing / etc. in the next couple weeks. Aiming for 2 Pounds in total for this grow. It was in a 8 Feet x 4 Feet Tent.

week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

First time trying a main-line. I left four growth points so I wouldn't have to top again. Makes sense to me, but I'm not sure if that's proper or not. Looks great today, though.

Sorry not many pics... Got away from me

Nice colorful yummi Buds... cant wait to dry them.. they almost ready💪 waiting for the one next to catch up.

Seventh week, day 46, keeping on cropping and LST, dominant colas in #1 have been fimmed and #3 has been topped. The stretch should start within a few days. Feeding schedule is going to change just after the stretch.

I’ve spent the last six days recalibrating my grow room. It feels more like a lab now because I am doing a lot of experiments with different variables and this week I have learned an awful lot. After pushing the environment to its absolute breaking point, I had to balance what my eyes were seeing against raw data to identify exactly where the Traffic Jam was occurring. I got so excited at the ability to control proteins in a plant with light spectrum I did the usual thing I do I drove them to their limits. Maximum photons (and beyond) in an environment where the plant just works like a suction funnel with a VPD of 1.6 kPa. What I forgot is that in my organic setup, the bottleneck is the speed the microbial life can create immobile nutrients. Under any normal conditions, the Biotabs 'just add water' method is more than capable of keeping up, but I had to be that guy and push them with 950 µmol of whites. By the time my Emerson burst came on, I was hitting them with around 1150 µmol, not counting the drain from the UV-B! This, on ambient, is just too much to ask; the plants used up all the calcium available, and my microbial life was unable to keep up. This is good to know, as if I wish to grow at this rate later, I will know what I need to add to facilitate that. I'm still blown away by spectral steering and the way proteins in a plant cell work. Grows are not normally still this fun at this stage. ________________________________________ 1. The "950 µmol" Mistake & Conclusion • The Error: I was running the main rig at 950 µmol, but with 4 strips of DRFR engaged, I was hitting a total ePAR of 1150 µmol. • The Failure: This intensity, paired with an aggressive 1.6 kPa VPD, outran the plant's metabolic capacity under ambient conditions. • The Result: 'Pistil Frizzle' on the crown of the Triple Cheese—the delicate stigmas literally toasted under the radiant load. 2. The Calcium Benchmark & The "Traffic Jam" • The Action: I noticed rusty, necrotic spots scattered across the leaf surfaces. • The Conclusion: The plants weren't 'low' on Calcium; the Biotabs microbial factory couldn't mine it fast enough to keep up with the 1150 µmol demand. I have officially flagged an image as my 'Calcium Benchmark' to track this in future runs. 3. The attempt to fix • The Adjustment: I have lowered the light ceiling to 800 µmol (targeting a DLI of 31–36) and stabilized VPD between 1.2 and 1.3 kPa. • The Rationale: This matches the 'spending' of the plant to the 'income' of my organic microbes, allowing the nutrient highway to move smoothly without crashing at the leaf tips. 4. Emergency Recovery: Bactrex & Bio PK • The Action: To clear the jam, I introduced a targeted top-feed of Bactrex and Bio PK to the Cheese. • The Goal: Boosting the microbial workforce and providing a direct PK source to support the Week 5 bulk while the Calcium delivery recovers. 5. Rhizosphere & Water Management • New decontamination for my 10L res refills: 10 drops of ExoThrive Neutralise, 5 minutes of violent blending, and an 8-hour air stone session • The Goal: To strip all residual chlorine and chloramines from my London tap water to protect my Bactrex and Mycotrex factory workers. • Future Intent: Researching the Water2 Pod 2.0 with a Fluoride filter to automate this and ensure consistent, medical-grade hydration. 6. Pot Size & Substrate Logic • The Constraint: Bigger pots are not happening • The Solution: To compensate for the smaller volume, I will increase Bactrex frequency and explore high concentrations of Gypsum (20g per 10L) in future mixes to increase mineral density without changing the footprint. Summary: I pushed for maximum push and hit a wall. By respecting the biological limits of a just add water system, I’m moving toward Environmental Harmony where every photon is used rather than wasted as a stressor. Been a great week for learning. Thanks for passing. Grow well ..

Como ha mostrado a lo laargo de estas semanas y meses, algo fuera de lo comun y en floracion no se queda atras. El color y grosor de tallos ya esta demas decir lo bien que andan, el olor (que es algo caracteristico de esta etapa de la planta) es muy fuerte y frutal. Estos pre-cogollos tienen una produccion de resina que esperemos se mantenga hasta el final....

Grow Diary – Wochenupdate 🌱 Diese Woche verlief insgesamt ziemlich entspannt. Großartig eingreifen musste ich nicht, nur bei der kleineren Pflanze, die nicht getoppt wurde, habe ich nochmal etwas nachgeschnitten – vor allem ein paar Blätter, da doch wieder einiges nachgewachsen ist. Aktuell sehen beide Pflanzen sehr gesund aus und machen einen stabilen Eindruck. Man merkt jetzt schon deutlich den Unterschied zwischen getoppt und nicht getoppt, was sich auch im Aufbau und der Struktur zeigt. Für den nächsten Run ist der Plan klar: Beide Pflanzen werden wieder getoppt und zusätzlich mit Scrog gearbeitet. Der Vergleich zu den vorherigen Grows zeigt einfach, dass sich der Mehraufwand definitiv lohnt. Bin gespannt, was die nächsten Wochen noch bringen. Happy Growing Growmies

Welcome back guys 💪💪 this week has been astounding in the trichome production and bud production absolutely blown away with the frost this gorilla cookies auto is producing, and a smell that can back that up holy cookies 🍪🍪🦍, very impressed with this strain, thankyou again to everyone that stopped by 💪 happy growing ✌️ www.2fast4buds.com

Easiest week so far, no problems just growing. I did spray some neem oil on my soil a few days a go to keep pests out of the fox farm soil. Week 4 will bring in topping after the next node grows in, should be 2 or 3 days. Also towards the end of the week after she recovers from topping I will begin LST. Will provide pics throughout the week Posted first vid in real light not my 600 watt LED. Mainly for health purposes. This will be so interesting to see how blueberry will develop after an accidental FIMing lol. Personal Note: Wait to top when there is a full mainstem and not barely new growth. Meaning wait til the new growth has 2 fan leafs spread out, and not when they are just leafs barley sprouted from the main stem. Rookie mistake number 1 so far at the end of week 3. Or maybe time will tell if blueberry will be gracious enough to be a beautiful big buded tree. I read where FIMing can develop up to 4 extra colas and still grow beautifully. Fingers crossed.

Tenemos otra semana más de nuestras godberries se ha visto un poco afectada por el clima actual como lo pueden ver en el video Ya entrando en esta semana aún nos faltan 3 semanas de floración esperemos que el clima mejore y no afecte nuestra cosecha …. Saludos cultivadores … buenas cosechas para todos 🔥🔥 pdta vi que estaban muy caídos los copos debido a su peso y compresión entonces amarre un poco para que capten mejor la luz y tengan un mejor desarrrollo en esta etapa

Ok had some teething problem. My first pack of seeds only 1 germinated so had Tovar’s order more, 2nd lot cracked no problem and is pushing up in the plugs hopefully a day or 2 and they should be Out the soil.

Was gone for 4 days and Wholly cow has she stretched and grown! Update: did some defoliation, the roots were going into the gravity fed system so I trimmed the roots coming out of the bottom and elevated the pot for 4 hours to air prune the rest. Cut down one plant so she got to stretch out more!

Goingto start LST this week everything is going well 💯 HAPPY

*********HARVESTING MARCH 14, 2018*************** (my first harvest!) Mar. 11, 2018 FINALLY!!!! 4/5 plants are showing me nearly mature (for our purposes anyway) buds. Most of the top colas are turning a light golden and the sugar leaves are crisping up nicely, starting to see amber on the calyx's.Have watered with plain R/O water ph 7.0 with nothing added for the last 2 weeks. I'm pretty sure I will do a complete harvest and not try to stagger it, I'd like for the bottom buds to get a chance to fully mature but for this round I want to just do a single harvest and keep the immature buds separate. It's been pretty dry here but I think a 5 day dry will be possible, after all the point is to bring the moisture content down enough to seal em up and cure properly. ... Mar. 9, 2018: Nothing new to report. Lost a couple very small buds due to falling over and breaking their stems. No way i'm going to tie up the dozens of golf ball sized buds in danger of falling, i'll just continue to tuck them back in and hope for the best. The frostiest plant seems like it will need at least a week or two longer than the rest, only just showing signs of amber on the fan leaves, and sugar leaves aren't crunching yet. One girl is very near ready, as soon as I see 10-15% amber on the calyx's and the buds have a golden hue with discolored and crispy sugar leaves then it's chop chop. Measured my runoff at 450ppm still Mar. 6-7, 2018: We are at the end of week 7 of flower. Going to be feeding water only for the duration of the grow. I'm hoping to see the buds start to enter the last stage and give me that golden hue I'm looking for. Getting more amber trichomes on the fan leaves and should see the golden hue migrate to the calyx's. ... Mar. 5, 2018: Starting day 92 from seed and 46 days since first pistils. None of the buds are shooting out new pistils so hopefully over the next 2 weeks the calyx's will swell and the trichomes will mature and the bud will take on that finished look. I'm already starting to see a few ambers, but with the crop being seeded it wont' be easy to track the calyx development as some are filled with seeds and already appear swelled.