All those colors

After all research of why plants are going at different rates the only conclusion Conclusion I’ve come to is to do with the fan being too close to the top left Plant and the Seeds to come from different plants but same strain. Will need to go back to royal queen seeds to ask the question??? Leaf burn from wind burn can slow growth of plants

Hello, fin de la semaine 9, floraison semaine 3. Les plantes se portent plutôt bien, même si j’ai pu constater sur une plante en particulier une coloration tirant un peu sur le jaune léger,, mais dans l’ensemble, je pense qu’elles sont plutôt en bonne santé. Nous sommes aussi au jour 21 de la floraison, j’ai donc effectué une dernière défoliation je pense. Et un bon arrosage pour bien enrichir la terre pour qu’elles récupèrent correctement de leur défoliation. Voilà c’est a peu près tout pour cette semaine.. à la semaine prochaine Happy grow...😎

Welcome to Week 1 of the Sweet Seeds Gorilla Girl XL Autoflowering grow courtesy of the fine folks at Sweet Seeds! This is the second of three consecutive grows/diaries that I am doing to showcase the tried and tested genetics from this reputable seed breeder. My last grow was a smashing success so I have high hopes for this grow as well. Nothing much to report for Week #1 although I will mention that the first watering was only 0.7 of a litre per plant (0.18 of a litre per plant per day) and the second was 1.4 litres per plant (0.35 of a litre per plant per day). I am watering on my usual schedule of every fourth day as this seems to be the sweet spot throughout past grows. I am using the usual- air bubbled tap water that is PH’d to around 6.0 and if need be (over the winter months in Canada) warmed to 68-70 degrees prior to hand watering with a small watering can. The seedling that lost one of it’s cotyledon leaves is fine but still a little smaller than her sisters. So now on to Mom’s tip of the week… Mom’s Tip for Week #1 is- YOU GET WHAT YOU PAY FOR- QUALITY IS KEY!… When considering growing Cannabis, even on a small scale, quality is an important factor in all aspects from the seeds to set up to the supplies used throughout the grow. Starting with seeds from a established breeder will raise the odds considerably in your favour for a successful outcome. Many seed companies are more than willing to ship out freebies while building up their brands which seems attractive to new growers- but use at your own risk! There’s nothing worse than being halfway through a grow and discovering male flowers tucked in amongst the lowest branches or realizing that your beautiful buds have been mysteriously pollinated just weeks before harvest. I know that seeds from a reputable seed breeder are usually more expensive and can be hard to access in certain parts of the world. But purchasing quality seeds from a reputable seed company is the first step towards homegrown Cannabis success. An area that new growers often overlook due to the high price is the quality of crucial components in their set up- including tent, lights, and intake/exhaust fans. Anyone can get away with cheaper pots, oscillating corner fans, water pumps for dechlorination, etc but it’s worth every penny investing into the workhorses of your entire operation. An initial investment of around two thousand dollars will provide serious growers with the longevity and hassle free basics needed. If done right, quality components will pay for themselves within the first 6-12 months of use and continue to serve your needs for 3-5 years to come. Supplies used throughout the grow are the final area where quality is important but somewhat subjective too. Although I’ve already stated that I don’t feel the need to spend big dollars on all the extras (pots, oscillating fans, water pumps for dechlorination, PH/moisture meters, etc- I do believe in doing my homework to make sure that I’m getting the best bang for my buck. I thoroughly research every item purchased and used in my grows by reading customer reviews, speaking with other growers and sometimes even trial and error at my own expense. Making quality an important factor in all aspects of Cannabis cultivation will benefit you, your grows and the planet we live on. 🌳🌎🌳

The two plants are growing very well! I'm happy with DWC. It's easy to manage and and small enough to fit perfectly also in small growboxes. 😉

First week of flower

We will start to check the tricomes next week but i think that some more time is needed, the buds are nice and fat and have a tremendous smell, great strain, specially if you like something easy to grow, its really a pleasure growing this strain, i took some monster crops some weeks ago and have a separate diary for these 😁

Nothing much to report. Its growing nicely. Tricombs are already showing...and loads of them! Tomorrow is watering day, going to up the feed a little but use fizzy water instead of plane. I only take leaves away that are blocking bud sites... only 2/3 per 7-8 days.

😎 😎 😎 😎

Finish week 8,5

Out of the 6 Ginger Punch Autos, 4 are looking like healthy seedlings, 1 has some helmet head and is a little behind compared to the others, and 1 of them died :( The Kritic Auto hasn't sprouted yet. Not sure what to do with this one. Next week I'll have another LED to have some more light as they go into the vegetative stage. But I would love some high quality lights, but unfortunately I'm on a budget at the moment. Stay tuned!

August 10-15th Flowers were popping and the tent looked happy and healthy

NCH x SB is starting to fade significantly and has stopped throwing out new pistils, trichomes are significantly cloudy and a few on the sugar leaves are beginning to turn amber. Debating whether I should pull her at full cloudy in a week or two or wait until I see more amber. Sour Kush is still fattening up and has a lot of white pistils yet to mature, trichomes are of course a mixture of clear/milky, no fade on this plant yet. Tangerine Dream is making great progress in flowering and bud sites have thickened up considerably, trimmed a majority of larfy bud sites on this plant since the discrepancy in the distance to the light was so large. Water pH 6.15, EC 0.4. Feed pH 6.15, EC 0.717.

Stretches and grew like Weeds second full week of flower good internoadal distance PH is 6.6 doing low nutrient numbers my last autoflowers grow till next FALL I’m getting some BReal seeds from Barney’s Farm Feminized and Photo my tent will only hold 3 big 5 Gallon pots and maybe an LB each

I got a smart plug for my humidifier and modded the button with an Arduino so that it turns on automatically when powered. Now I have events in my home Assistant on raspberry pi which will keep the VPD within a specified range. Every since then, the plants have been SO much happier and I have piece of mind now. I'm hoping these plants can pull through the stress, but I planted 4 more bag seeds just in case, they will sprout soon. I did some LST because why not. Accidentally broke a stem but I squeezed it together so now I have to pray.

Men, I don't know if was the nutrients, pots, new light or the second time. The size is rly big than the first time. The Torpedo double the size of the first time. Some old leaves are drying, taking an orange, by the other, same on the tip are taking a little effect. Maybe is 'cause by overnutrition. This week over the vegetative stage, and the smell will be more stronger since now.

Environment's come back into line as it went a bit out of whack for a day or two. Outside temps dropped, so the extraction was pulling cold air and RH was bottoming at 51%. I added my Vivosun W70 heater to take the edge off incoming air—nothing fancy, just warming it up so the room sits where it should: 24°C. I set a target temp with a max and a minimum and it will sit in the happy zone,upping the temp also raises rh nudging toward that 58% im aiming for but with Minimal fuss. I've decided to add a 6-inch inline fan at the back of the room too,this is pointing up through the AL's lower canopy. Those big dense buds aren't getting enough air movement underneath, and botrytis likes the small micro pockets of humidity I have foind ,so an extra push keeps it breathing. Trichomes are mostly cloudy now with amber starting to show. Pistils pulling back. Images show the resin's thick—primary flowers are loaded, secondary sites getting the amber creep. This phenotype just wants to finish. I feel I'm looking at maybe 5-7 days before she's ready. Structure's solid. The lowers chunked up decent despite the uneven light. I've deployed a brace of String to maintain shape and it's al holding the weight fine. Nothing's stressed. Leaves are doing what they should. Older growth yellowing, plant's pulling nitrogen down into the flowers. That's maturation and not a problem. It's funny because a year ago. Would.b.trying to solve this yellowing and would undoubtedly do more harm then good. It's nice o see a leveling up within myself. Not something I'll often vocalise. Lights are running as whites on a 12/12 giving 33 DLI. In addition I have my reds coming on 5 minutes before the main cycle and then they stay on for 6 hours. They then common atlights off for 10 minutes to put everything to sleep. As it's the last week I skipped the Bactrex feed—makes sense. Too late for the microbes to settle in and work. The substrate's already done its job. All I need to do is just keep the environment steady and let her finish.

Day 79: #3#4*: 1.5 L water + 2ml/l atazyme #2#4: 1.2 ml water + 4ml/biogrow + 4ml/l biobloom + 1.5ml/l bibloombastic Day 81: #3#4*: 1.5 L water + 2ml/l atazyme #2#4: 1.2L + 0,5ml /l bibloombastic + 2ml/l topcandy + 2ml/l atazyme Waiting 5 days more, and see how is it going for flushing (#2#4) and choping (#3#4*) Day 84: 1L + 2ml/l atazyme