Likes
Comments
Share
Likes
14
Share
I used half the recommended dose of Indo products for each plant through this grow. The monkey juice is half recommended making it every week rather than full dose every two. The sticky bandit was fed with it every week at half dose till later on
Likes
2
Share
Day 38, Mexican Haze (x1) is 7” tall Morning Glory is 8” tall The remaining closely average 6” in height. Amazing dark green leaves 🌳💕🌳 Day 42, Second feed, sometimes they dry out fast and I just give them plain water before a feed on the next watering.
Likes
4
Share
@Artemis
Follow
I decided to mainline my plants this week. I've never done HST, but I felt confident and I'm extremely happy with the results. I also gave each plant a litre of Multifeed because I noticed some leaf necrosis and yellowing which I believe is a bit of nutrient deficiency.
Likes
16
Share
The Plant is getting very bushy and I am thinking of dedefoliating the plant but I am unsure because of it being an Autoflower in the early stages.
Likes
9
Share
All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
38
Share
Esta semana podar, clonar y voy adquirir nuevos productos. **6.1.1.- CLONACIÓN DIA8: Ya toca hacer podita, para este tipo de cultivo (SOG) interesa que las plantas tengan un cogollo central… y todo lo demás sobra! Trataremos de sacar unos esquejes para tener esta genética presente, creo que saldrán bastantes, aunque la verdad voy a tener que hacer milagros porque son muy pequeños, pero estoy seguro que saldrán adelante. Si todo va bien la segunda parte de este seguimiento tendrá que ver con esos clones. Vais alucinar con la poda tan agresiva que les he practicado, pero les va a venir bien. Saco todas las plantas para hacer una inspección de forma individual.
Likes
134
Share
@BigDaddyK
Follow
Day 43 - Tuesday 27/11/18 - changed the reservoir with fresh solution , getting a few mottled under leaves that suggest cal mag issue , or possibly ph , but I have double checked both of these so fingers crossed , I measured her today with my metre ruler and she is 73 cm tall , looks very bushy , I took a light on pic with my iPhone , and made you a little video 😜 I should just add , there are 3 plants in this picture , look back to week 5 and you will see , the lemon is very bushy , gorilla is tallest , Tangie seems to be fastest 👁️ I have also changed the temperature and humidity slightly. Day 44 - Wednesday - I have included the ruler for scale today, i see so many good pictures on here but the size can be questionable, so also proof i own a 1m ruler...lol , topped up with about 1.5 litres of water, EC was ok and ph perfect. If there are any pictures you would like to see please comment , with a little description. Day 45 - Thursday - I dont know what happened yesterday but she had drunk so much water ( added 3 litres + ) and needed 10 ml of A+B , Day 46 - Friday - Added 12 ml A+B and about 3 litres of water, she is in her super feeding stage, this week she has been devouring everything, some of the leaves I think are showing signs of under feeding but I really think its the strain on the plant as she tries to buildit is really tempting to up the nutrients but once you burn it, its never the same.I made you a video, enjoy. Day 47 - Saturday - Added 3 litres of water , 12 ml A+B ( I mix it 6 at a time in 20 ml of water syringe ) Day ( insert generic day here ) - JOKE , Day 48 Sunday - still eating and drinking like a monster, i measured her at 89 cm today, added 3 litres of water ,12 ml of A+B DRAMA ALERT - DRAMA ALERT Day 49 - Monday - added 10 ml Of A+B and 3 litres of water, came home later an found the electric had tripped, usually this is just a case of flipping the switch, but this time it kept on tripping, so i went through the painstaking unplugging of everything, and had literally unplugged every fucking thing , when i finally ( at my wits en after 2 hrs ) found the fucking culprit,excuse my language but i find that cursing really does help, i think its a middle age thing,and it was.............. A SIX INCH FAN , you know the little clip on one. anyway i added a couple of tAnGiEmAtIc PICS TODAY TO MAKE ME FEEL BETTER ... A WORD OF ADVICE IN DWC SYSTEMS, DO NOT HAVE MULTI PLUG EXTENSIONS ON THE FLOOR, CABLE TIE THEM TO THE SIDES OR THE TOP, THIS WILL PREVENT ACCIDENTAL WATER SPLASH!!
Likes
49
Share
@Roberts
Follow
I switched her to ph water yesterday. She has a good cloudy trichromes with just a few amber started. So in roughly a week she should be right about where I want to try it at. She still has some flower, even though I messed her up in vegging. I have been having issues across the board here, and there on different plants. Beside that she smells good, and good trichrome layer. I am just letting her finish up, and will harvest on next update. Thank you Medic Grow, Athena, and Fast Buds. 🤜🏻🤛🏻🌱❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
21
Share
@BB_UK
Follow
So amazing! She’s stretched healthily up to canopy and I feel she may still have a bit of stretch to go so I think I can take her off her raised block (4”) and let her just be where everything else is at 44” (top one) it’s going to be an amazing yield here! I think my best ever I’ve ever done! With the least supplements 😉 my way seems to get me more than if I used all of advanced nutrients line up! Lol been there done that!
Likes
12
Share
@GizaWRZ
Follow
Lets say how many i get from each plant: Amnesia 241 g Six shooter 143 2x Blue Dream 271 g Not that bad for Autos ✌️ Thanks everyone for watching this diary, I wanna invite you to have a look next diary with White Widow :) Peace ✌️
Processing
Likes
15
Share
Hi guys ! Wow this grow is going just so well ! The smell is already really strong , a fruity skunky smell invades my house ( luckly i dont have nearly neighbours ) wich i like a lot ! They are just cobered in trichomes and starting to get fatty ! Let me know ur thoughts guys ! Happy smokes !
Likes
14
Share
Got a dehumidifier it’s reading different from what mine controller 69 is saying but I have it set at 40% it’s the lowest so it’s going pull humidity regardless right now it’s about 53% which is okay would like it to get down to the 40’s I also changed the light schedule today to 20/4 the humidity raises at in my tent when lights are out so I figured change it to 20/4 instead of the 18/6 I’ve been running so if humidity does go over it won’t be for as long as before hopefully this works just trying to avoid any mold situation So far the Amneisa Haze 2 is at stretching she’s going be big I can but the haze 2 is done seems to just be flowering the sour diesel is looking good as well so far I’m happy with its looking like left town for two days and the auto watering pots worked!
Likes
132
Share
Hi all👨‍🌾👋 Welcome to my another week update Hope everyone keeping well and having a great week 🧑‍🌾🤤 Week 2 Feb 9 - Feb 15 Very easy and steady week. Kitana and Aphrodite doing absolutely fantastic. Watered 2 times this week with approx. 300 ml each and on Feb 12 introduced foliar feeding, at start with few drops of biobizz fish mix in 100ml solution. They responded flawlessly😁🤤🧑‍🌾 Have a great and successful week everyone ✨🍀 Much appreciate all your likes, follows and comments. 🙏💚❤️💜 Peace and love brothers and sisters 👨‍🌾✌️💚 Links https://2fast4buds.com/seeds/TROPICANA-COOKIES-AUTO https://www.biobizz.com/ https://fishheadfarms.com/
Likes
1
Share
What a week. First off these girls are way to damn small to be 8 f'n weeks in. But I've delt with about 2 weeks of very hot weather eary on. The water temp got up to 85 that I know of. So it fried the roots. I discovered hydrogen peroxide little to late but it has helped. I really thought I was gonna lose a couple this week but they are doing much better. I got my new grow tent lights in. Using them on the main grow room until I get the other new light built but thatbwont be for some time. The other light is almost done. I've got the new pvc pipe frame made. Yaya I know cheap. But hey that's why I did it. I just ordered to more light setups. That puts me at $300 for this light alone. But damn it is so Brite. Right now with just 6 lights on high its at 283watts. I'm adding 2 more that should put me around 376 Watts for a 5x5. These are the large cog legs. I have 3500 wave length ones. I also built a cloner. Shout out to @icanthc for one of his videos that gave me the inspiration to build my own with improvements. I've had bad luck with clones so far so I hope this will help. I'm going to cut down CDG#2. She so damn far behind. I will get 3 cloned out of her. Fingers crossed.
Likes
28
Share
Youtube video coming soon Check the other diairies! Along with harvest and bud pictures in the next couple of days! I love this strain no doubt