Likes
Comments
Share
Oh man, she’s begun the stretch… And I scared! Thankfully I just got a new 1 foot taller tent, gonna need to get that up soon as this AVT is trying to take over the world! She’s badass though, accidentally gave her a couple ounces of the flowering tea I made for the forum stomper, she’ll be ok though, got a little nitrogen toxicity I need to address first… but thanks 👽!
Likes
25
Share
@Rob691
Follow
D-70 : At this stage, I'm a bit.... surprised that the Desfrans are not taller thant they are. The smallest one is 35cm wich is really small for a 100% sativa strain. The tallest one is about 56cm, wich is also quiet small I think. If I compare with some other diaries, the tallest one could be in the target if we take into account that I trained them a lot during their first weeks. But the small one is almost the half she should be... There's no sign of deficency, none ! I have 420w @ 50 cm from the top, so it's not because of the light. The container is a 20L smartpot. I simply do not understand. Is it juste because of that phenotype ? Will she grow during the next 7-9 weeks untill she'll recover her late ? I Modified a bit the position of the light so the Lumatek 100w FullSpectrum on the side of the box is really pointed to the "slow" girls. We'll see if it change anything but I really doubt about it... The only lead I have is : Desfran loves HEAT and Light. The 2 smallest are on the coldest side of the box, even if it's not cold at all. But it is the side near the window...
Likes
16
Share
Likes
9
Share
@Canadian
Follow
Day 57 the plant continues to grow without a problem I can see there are continue to stretch I used painters tape around the branches that I supercrop in order to give them a little bit support and allow nutrients to continue to flow through the branch the plant has been recovering very well from high stress training and I'm looking forward to see how this girl is going to turn out . I know that most of the growers in this platform and elsewhere do defoliate and trim down all the lower branches of the plant so that the plant can concentrate all its energy into the higher bigger and better buds .and I do not do this because I drive the plants very hard with nutrients and those lower branches with small buds always give me the first sign of anything going wrong with her and that's why I leave them as a buffer zone to protect the bigger buds and that way I can push her as hard as I want. thank you for reading I will continue to update have a happy grow
Likes
13
Share
SO SO SO SO SAD! Will I lose my plant due to those dead leaves? I presumed it might be nutrient burn so I gave her water only. I am really concerned as to how this will affect her and whether she’ll make it.
Likes
2
Share
"And God said, Let there be light, and there was light." Genesis 1:3 Inhale for 13s, Exhale for 13s, Inhale for 8s, Exhale for 8s, Inhale for 5s, Exhale for 5s, Inhale for 3s, Exhale for 3s, Inhale for 1s, Exhale for 1s, Alignment. 1.618 More energy, more blueprint. Electrical Conductivity refers to how easily a material or solution allows electrons or ions to flow continuously when an electrical potential is applied. Electrochemical Reactance is the opposition to alternating current (AC) caused specifically by the temporary storage of energy in electric or magnetic fields, rather than energy being lost as heat. Reactance does not directly alter a material's intrinsic electrical conductivity. Instead, it dictates how the system stores and releases energy over time, which creates a temporary barrier to current flow in AC circuits. Together with resistance, reactance makes up total impedance. Electrical impedance (the combination of resistance and reactance) in the rhizosphere dictates how easily ions and water move into plant roots, directly impacting the Electron Transport Rate (ETR). High impedance restricts ion mobility, leading to nutrient deficiencies that decrease ETR and stunt overall plant growth. Using copper and zinc plates in the plant medium to form a natural earth battery to assist with Electrochemical Reactance. The moist soil acts as an electrolyte, while zinc serves as the anode and copper as the cathode. Zinc is a highly reactive metal and oxidizes, losing electrons into the soil. These electrons travel through an external wire to the copper plate. The moisture and dissolved salts in your plant medium allow charged ions to move freely between the plates, completing the circuit and generating a small direct current (usually between 0.8 and 1.1 volts). This micro-current subtly alters/the Electrical Conductivity (EC), allowing more effective breaking apart of chemical bonds in the soil (electrolysis), making soil nutrients like phosphorus, calcium, and potassium more accessible to roots. Buried the zinc plate on one side of the plant’s root zone and the copper plate on the opposite side. Ran an insulated copper wire above ground to connect the zinc plate to the copper plate, creating a closed loop. Make sure your soil remains moist and contains natural mineral salts; entirely distilled water or bone-dry medium will prevent ion exchange and block the current.
Likes
229
Share
Hi everyone 😁 I would like to thank you all fellow growers and breeders for such a great support on this journey. Thank you Grow Diaries and Green House Seeds. Without you all this wouldn't be possible. Love you all First ever recorded diary so don't know where to even start 😅 I am returning to growing after many many years of break. This is my first ever experience with autoflowers, scrog, lst, led and such tiny grow space. Choice of strain - Big Bang Auto from Green House Seeds. I have run so many strains from this seed bank in the past and I was always happy with the final outcome. Was looking for indica dominant strain, fast flowering cycle and very important heavy yields on small spaces. Again thank you GHSC in very happy of choosing this strain. Little bit about my cabinet. External dimensions: 64 x 50 x 114 cm (W x D x H) Growing area: 55 x 47 cm cm (0.26 m2) Panel based on SAMSUNG LM301B diodes Spectrum: Samsung LM301B – 5000 x72 Samsung LM301B – 3000k x136 Samsung LM301B – 660nm x9 Samsung LM301B – IR 760nm x1 Regulation in the range of 20W - 110W - Meanwell XLG 100-H-AB PPF 300 umol/s PPFD 890 mol/m2/s @30c Total of 6 adjustable fans, 4 exhaust fans 4 modes - silent/drying, vegetation, flowering, full power Active carbon mass in the filter 2kg Absolutely love my grow cabinet. Thinking of next build already. My grow 3 beautiful ladies - Nuna, Luna and Sweet Mary Jane. This was a pleasure experience growing autos for the first time. All 3 ladies on the end developed perfectly. Nuna, left corner lady- tall and beautiful. She had some problems to switch to flowering and was even considering removing her but very happy that I was patient enough and turned great. Luna, right corner lady - have to say she is the queen. She has the most heavy buds from all, the most. colorful. Her wet weight was 420g, can't say how much of dry but guessing approx. 100g Sweet Mary Jane, front seat lady. I think she was the most pleasant to grow of her location but due to no other spare space for drying I belive that I have harvested her at least a week to early. If keep longer I belive she could be the most yielder from all 3. Thank you all for all the support, help, comments, likes, messeges. Love you all 💚💚💚 Will update this diary in some time and when puff perfectly cured 😎 Peace and love ✌️💚
Processing
Likes
17
Share
Hey guys idk what’s going on my autos it seems as if the Gelato and Zkittlez has just stop growing completely I mean there’s no change at all the Zkittlez Og is starting to fill in forming nice little buds but my other autos seems like they had stop completely I know the lifespan on the Gelato is 76-80 days from seed to harvest The Zkittlez lifespan said the same 76-80 days from seed to harvest Zkittlez Og lifespan is 80-90 days from seed to harvest And I know I’m for sure March 9th marked the 60th day on all autos and I know I stress the hell out of them overwatered etc but it looks as if I might only have one plant to successfully make it yet this is my first grow and why I choose to do autos first to give me a little insight on what I’m doing but I’m going to let these girls go for a full 90 days before I decide to trash em and focus purely on my clone grows
Likes
1
Share
@rommyu
Follow
Lots of issues at the moment, issues with not knowing if I have a deficiency or if the plant is progressing along. Yellowing leaves - should I let them falls off? should i remove them to prevent their getting infected and infecting others?. Outside temp is around 30-32 degrees making my ice pack on the pot side solution insufficient to keeping the temperature stable. Lots of tucking and the canopy is reaching 1m2 and the roots are so massive they fill the bucket completely (15L). They smell fresh and It feels alive, the smell the energy coming off the microbes, beneficial bacteria and mycorrhizza, like smelling a flowing river teeming with life. I didnt train the stems properly (i wanted more horizontality).. Which is causing the issues I have now. But in the old tent (which was 2x2 feet 60cmx60cm) they would touched the wall and created other issues, I hadnt decided yet where i wanted to put it next (120x240cm or 60x120cm). Im learning alot about electrical conductivity (ec) and also about how my plant responds to concentration of fertilizers and helpers as suggested by the manufacturers recipe. I have branches in the front that are not growing to the ideal height, im just tucking and tucking the others hoping they catch up. also the light ppfd is up to 1000. and the distance is about 250cm. Im hoping to get at least 350grams of dry bud, and if im lucky maybe even 500!. I plan to do the same exact grow again, with the same breed (not a clone unfortunately). Hopefully I can increase the yield as well as any factors i deem needing improvement (less electricity, optimal percentage of fertilizer, less fluctuation in vpd). in short: lots to learn! but not enough buffer!
Likes
29
Share
Without many words! she's perfect! both in health and in appearance and in development!) and what is the healthy color of the leaves ?!))
Likes
8
Share
Gracias al equipo de Fast Buds, XpertNutrients y Marshydro sin ellos esto no seria posible. 💐🍁 Lemonpaya: Lemonpaya es una fusión perfecta de nuestro corte Keeper Lemonade y la reconocida variedad Papaya (Oni Selection). Fast Buds Lemonade Keeper, apreciada por su suave fragancia a limón, sirve como padre fundamental en muchos de nuestros proyectos de cría. La papaya, a su vez, aporta su característico aroma y sabor intensamente dulce y tropical, junto con una reputación por su gran producción de resina. Lemonpaya hereda los mejores atributos de ambos linajes, con abundantes cosechas de flores densas y grandes infundidas con la tentadora dulzura de la papaya y un toque de limón picante. La planta se presenta como un arbusto alto y robusto, adornado con colas largas y rectas cargadas de densos cogollos. Su resistencia al estrés la convierte en una variedad versátil adecuada para espacios de cultivo tanto de interior como de exterior. En interiores perdona multitud de errores, mientras que en exteriores muestra una resistencia incomparable a los desafíos y elementos ambientales. La Lemonpaya prospera tanto en climas cálidos como fríos y ofrece constantemente una cosecha excepcional acompañada de su suave perfil de terpenos con infusión de limón. 🚀 Consigue aqui tus semillas: https://2fast4buds.com/th/seeds/lemonpaya 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop 📆 Semana 13: Última semana antes de cosechar esta maravilla, hay 2 fenotipos diferentes uno de ellos con unos tonos purpura que resulta una belleza visual
Likes
5
Share
@Jayndre69
Follow
Well flush them out for a week and then chop chop. Very happy tho was hoping for some more colours.
Likes
89
Share
@Gunnen
Follow
Week 6 was smooth. Especially after correcting the signs of deficiency. The plants have bounced back quickly after being fed and are thriving in the environment. New growth shows no new signs of deficiencies, and old growth did not get any worse. Luckily it was caught early enough and corrected. At the end of week 6 I continued to tie down shoots and continue the LST throughout the canopy. Light defoliation was also done around prime bud spots, and the lower skirt near soil. Technically also removing lower growth that won't amount to much, aka "lollipoping." Plan for week 7 is to continue to water when dry to a PH of 6.2-6.6 and LST with light defoliation where needed. Monitoring the environment and running dehumidifier to 45% RH. Fans are blowing and these seem like they will be big girls. These are some of the bigger autos I have seen personally. *UPDATE* One plant is showing nitrogen toxicity. Leaves are curling bad at top. I took her out and flushed her, as I may have built up too much with run off when fixing the phosphorus issue. Continue to monitor and hope it recovers quickly. But have also seen a lot of other grows with similar leaf traits with downward curls, might be genetics. None the less, will let dry and water thoroughly all plants next time with PH 6.2-6.5 water. *UPDATE 2.0" So the girls soil was not good. Turns out my calibration was off on pH meter and was flushing with around 7 pH water. Read the soils and one plant, that had the claw and dark leaves, was above 7.0 soil pH. Others were below but still a bit high. Have been adjusting pH of water to about 5.8-6.2 pH for next few to help lower it. One girl is not happy. We will get the train back on the rail though.
Likes
3
Share
Buena semana para todos!! Esta planta también surgió de un esqueje que intercambié. Al momento de recibirlo tenia 1 mes de vida y lo pasé a una maceta "Air Pots" de 10L. Tuvo 40 días de vegetación en esta maceta, se le hizo podas apicales y Supercrooping para regular su altura. Al día de la fecha (29/5) lleva 17 días florando. Está hermosa. Calculo que en 3 semanas más estará para corte. Saludos y buenos humos.
Likes
130
Share
❓ 💚 😗 💙 ❓ 💚 😗 💙 ❓ 💚 😗 💙 Welcome to week 7, dear friends!! 😘 DAY 43 Moved to a new tent wih a new LED 💡 DAY 45 Watered with 2ml A+B und 0,7ml C4 + vitalize and enzym+ +2ml calmag 💧 Topdressing with Vitabrix DAY 47 Watered with 2ml A+B und 0,7ml C4 + vitalize + 2ml calmag 💧 DAY 48 Watered with nematodes. 🐛 DAY 49 Watered with 3ml Bigfruits + Humics + 2ml calmag + vitalize 💧 Thanks, everybody for visiting!! 💚 💚 💚 Immaculate grower love!!! 😘🙏 🌱 ___________________________________________________________________________________ SETUP: 80x80x180 cm Zelsius 240W Full Spectrum LED IR UV dimmable DW240H-A6-HS Heatsink color red LED Chips: 512pcs SAMSUNG LM301H + 24pcs Osram 660nm + 8pcs Osram IR 730nm + 8pcs UV 385nm Color mix: 2700K + 4000K 2,8umol/J Driver HLG-240H-C2100B Coverage: veg 5x3ft / flower 4x2ft Product size: 628x205x68mm Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! ❤️ If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ Mills Nutrients Biobizz Lightmix custom exhaust fan 320/270cm³/h Carbon Active Granulate 240cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow + Bloom to pH 6.2 ❓ 💚 😗 💙 ❓ 💚 😗 💙 ❓ 💚 😗 💙
Likes
3
Share
Likes
28
Share
@Ferenc
Follow
Day 65, 14th of November 2020: Bla bla bla I.could say a lot but just look at the pictures and video and say what you want. Crazily streching, and growing new sides as you can see she is having those fluor green new sides.... aggressive... strong I do love! Pre flowers and pistils are out! Beautiful tall even after topping she really grows.... Fertilization happens every 2nd day with the ratio and mix above. I set the lamp 15 minutes shorter to switch off earlier so she receives 11:45 of darkness. I would like to imitate the nature when longer nights come with time till the 4th week (when she will receive 13 hours darkness a day 15 minutes minus 4 times = 1hour) so every week 15 min longer darkness for 4 weeks and then back to 12/12 to have bigger buds from the 4th week....
Likes
6
Share
@buda420
Follow
My PPM was 180 in plant B and 190 in plant A, today i gave I little bit more nutrients to both of them, rising the ppm to 290/ ph 6,15- plant A - and 320 / ph 6,1 plant B.
Likes
7
Share
@Ereks007
Follow
It's been a smooth grow year ..I am only using flora nova ...and pro tekt. Silica ..water is from local tap ..filtered with rv filter. There is movement og ,fatso bx1 x wilson, sunset sherbert x Sunday driver x Natrual Born Killer strains ....thanks for viewing
Likes
4
Share
Everything going great. Cleaned up some of the bottom leaves. 🍃 Increasing irrigation to 9 events. Light at max intensity. Almost as high as it goes but they still got room to grow. 18.11 Defoliated the bottoms further and removed weak branches. They really packed on budsites these few days.