Vote Now 🏆 for the Grow Awards 2025!
Likes
25
Share
I am still having slight burning of leaf tips more so on the right side of the tent. Otherwise, growth is good. Stratiolaelaps scimitus are now abundant in the soil. Very much alive. Note: As gibberellic acid is not soluble in water you need to dissolve in alcohol first, Mixed 0.75g Gibberellic Acid 90% with 50ml of 99% Isoprponal alcohol +1 crystal of sodium tetraborate, (Any alcohol will do but a higher % works better) also warmer alcohol helps dissolve the gibberellin. Mixed with 1000ml =1L of distilled water, bringing the concoction to 400ppm. 2000ml = 200ppm etc Every plant has a different threshold required to elicit a response, 400ppm is on the high end of the scale I've read to be careful with dosage as it's easy to over-apply, let's find out if it does anything like it described. Added bunch of enzymes, aminos, 5 or so different kelp. Can be kept for 1 week in the refrigerator. Nutrients for the week are recipe foliar application. The speaker (containing a 3 KHz signal and nature sounds) is played at high volume with high treble and medium bass for 10 minutes before spraying the plants. The plants are then sprayed while it's playing and the sound is continued for another 20 minutes after spraying. Both sides of the leaves should be saturated. Treatment is best performed early in the morning/daylight, preferably in foggy 65+RH% dew. On cold mornings, spraying should be delayed until late afternoon if outdoors. Do not spray plants when the temperature falls below 50o F. The formula also can be administered in the regular weather supply, by drip-feeding, hydroponics, etc.. The nutrient solution should be applied once somewhere in first 4 weeks, then twice weekly thereafter. https://biologydictionary.net/gibberellin/ Once a plant has sprouted past the surface of the soil, the endosperm is long gone. The plant must now rely on photosynthesis for food. However, the role of gibberellin does not stop at the seed. Gibberellin is responsible for many aspects of plant development. Further, plants produce many forms of gibberellin molecules, which act on different parts of the plant. In the image below, you can see the effects of a specific gibberellin applied to a plant. In number 1, no gibberellin was applied. Plants 2 and 3 both had gibberellins applied, with plant 3 receiving the highest dose. Gibberellin here encourages the plants to increase their internode length or the length between their leaves. In many plants, the regulation of gibberellin is an important natural process that regulates their height due to this process. At the cellular level, gibberellin is influencing the balance of proteins. In doing so, it encourages cell growth and elongation in the stems and between nodes. In some species of plants, gibberellin is involved in many more processes. These include flowering, fruiting, and senescence, or the natural death of leaves and other plant parts. Interestingly, many genes that regulate and adjust gibberellin levels are influenced by the temperature. Thus, when the temperature changes during seasonal change, the plants react to this as gibberellin levels change. This starts off many processes such as flowering and fruiting. Gibberellin molecules are involved with and interact with other plant hormones. The auxin level, for example, is directly related to the gibberellin level, and the two complement each other. Ethylene, on the other hand, tends to degrade gibberellin levels. Plants use these hormones, which respond to different inputs, to balance and react to inputs from the environment. These inputs signal various environmental conditions, which the plant is keen to take advantage of. Gibberellin Structure Gibberellin molecules of different types are synthesized in many different parts of the plant. Currently, there are over 100 uniquely identifiable gibberellin molecules. These molecules are synthesized in many cells of the plant, but tend to be concentrated in the roots. This is different from auxin, which tends to concentrate at the apex. Gibberellin is a diterpenoid, which is a familiar and highly represented molecule in biochemistry. It forms the basis of molecules like Vitamin A and Vitamin E. Seen below is Gibberellin A1, which was the first identified gibberellin. Other gibberellins have the same basic structure, but have various side groups attached. These groups affect where and how the gibberellin acts, which is how gibberellin can have so many diverse and unique functions in different tissues
Likes
4
Share
Foi feito amarras no final da semana buscando um melhor aproveitamento da luz, hoje foi preparada uma solução nova com a quantidade padrão para a vega para este fertilizante. foi colocado no vaso também uma colher de bokashi, Notado que depois da rega as platas levantaram um pouco e seguem levantando, acompanhar nos proximos dias,
Likes
4
Share
Rimettiamo il telone ma questa volta trasparente, la pianta continua a crescere e fare fotosintesi ma sopratutto sono al sicuro se piove, non vorrei rischiare di rovinare tutto proprio alla fine, anche la più stupida pioggiarella a questo stadio della pianta potrebbe fare tantissimo danno.
1
21
Share
@NSABND
Follow
today was the day 🙏 time was running out and i have to harvest "Hilde" 😏 summary of "Hilde" 92 days in under 3 min. enjoy 😅🙏 I dry the plant in the boiler room because the climate there is very good. I also darkened the room so that no sunlight disturbs the drying process.😏 "Darkroom" Day 2 for "Hilde" 😏😄😜
Likes
2
Share
@MNGROW
Follow
The stretch is slowing down and the buds are starting. The one I topped has lots of bud sites 👍 we will see witch has a better yield. It has a fruity smell with a diesel after smell. 🔥🔥
Likes
2
Share
@MNGROW
Follow
She went from being the smallest to being the second tallest in just about 2 weeks she has been stretching real nice and looks like she is gonna start to bud. Starting to get lots of bud
Likes
8
Share
@drbill
Follow
I'm shocked and impressed at how much abuse from my mistakes (high PH, low PH, no nutrients, to nutrient burn to light burn) and it turns out so good! I did a rough trim on them and hung the branches on hangers. I weighed each hanger so I can update it later Epsilon one 66 g hanger one Hanger to 61 g Hanger 3 40 g Hanger for 47 g Hanger 5 72 g Epsilon two my Hanger one 49 g Hanger to 33 g Hangar 375g Hanger for 71 g Hanger 540 g Hanger six 93 g Epsilon 3 Hanger one 95 g Hangar 295 837 Hangar to 59 g Hanger for 75 g Hanger five 52 g 5grams loose bud Wet harvest 1028g 36.26oz 2.26lb
Likes
30
Share
@Hashy
Follow
******************************************** Week 14 Ripen (flower week 8) ******************************************** Light cycle=12/12 Light Power=125w 52% Extractor controller settings High temp= Day 26c, Night 20c Low temp= c Temp step=0c High Rh= Day 50%, Night 55% Low Rh= % Rh step=0% Speed max=10 Speed min=2 Smart controller settings (during lights on). Lights on=9.00am Top fan on=+22.5c Top fan off=-22.0c Dehumidifier on=+50% and -26c Dehumidifier off=-50% or +26c Smart controller settings (during lights off). Lights off=9.00pm Dehumidifier on=+55% and -20c Dehumidifier off=-55% or +20c VPD aim=0.6-1.4 DLI aim=30-45 EC aim=0.2-2.0 PH aim=6.0-6.5 NPK(3.6/24.8/18.4) 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 6 drippers. Feed=Ripen Nutes. Neutralise=0.1ml/L Dragon force=4ml/L Boost=1ml/L Volume=12L Easy Ph up= 0.166ml/L Ec=1.42 PH=6.3/6.4 Runs=16 Run times=5min (250ml each) Gap times=15min×14, 45min×2 Total runtime=80mins (4.0L each) Total flowrate= 100ml/min (50ml/min each) Auto start time=10.00am Auto stop time=4.05pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅18/8/24 Sunday (day 92, day 50 flower) 📋 💧 Method= automatic Feed=Nutes Ripen Volume=12L Easy Ph up= 0.166ml/L Ec=1.4 PH=6.3/6.4 Volume left=3.3L Volume used=8.7L (108ml/min) Volume each=4.35L (54ml/min) Runoff. Runoff=1.8L Ec=3.5 PH=/6.1 @5.15pm manually 0.4L each Total left=2.5L Total used=9.5L Total each=4.75L Extra runoff=0.4L Ec=2.8 PH=/6.2 💧 📅19/8/24 Monday (day 93, day 51 flower) 📋 temps should be cooling off for about a week. 📅20/8/24 Tuesday (day 94, day 52 flower) 📋 Rotated pot slightly. Pot is quite light. 📅21/8/24 Wednesday (day 95, day 53 flower) 📋 💧 Method= automatic Feed=Nutes Ripen Volume=6.0L Easy Ph up= 0.166ml/L Ec=1.5 PH=6.4/6.3 Volume left=2L Volume used=4L (50ml/min) Volume each=4L (50ml/min) Runoff. Runoff=0.1L Ec=3.6 PH=/6.0 @7.50pm manually 0.5L Total left=1.5L Total used=4.5L Total each=4.5L Extra runoff=L Ec=0 PH=/ 💧 📅22/8/24 Thursday (day 96, day 54 flower) 📋 📅23/8/24 Friday (day 97, day 55 flower) 📋 📅24/8/24 Saturday (day 98, day 56 flower) 📋Defoliation ******************************************** Weekly roundup. 📋 Great week really, bulking up fine, trichomes maturing. Stems are struggling with weight. Environment has been kind. I feel that's it for nutes and I'll be able to just plain water for the remainder of her life. Take it easy. Back soon. ********************************************