Likes
Comments
Share
@TeamBudz
Follow
Extremely easy to grow. Heavy feeder. Great Yield. Definitely recommended
Likes
15
Share
@dank604
Follow
Well the older (28 day) gal is doing great, bent the main stem quite a bit along with a few side budsites, excited to see how much is stretches out in the new tent. The younger (21 day) gal is doing her thing - power veg mode, interesting to see even though she's a week younger, she's just doing her own thang ;) I may need to trim a few leaves off her to get light to the bud-sites underneath. happy growing y'all! 😎
Likes
7
Share
@ShotoCann
Follow
Sorry it took so long for an update. I got married in the meantime and went on a honeymoon. Before I went though I took the plants down and had a friend take care of the drying and curing. It looks like I got 2 pheno's. One is has more red hairs and is a bit more skunky and peppery. The other has bit more sativa like bud forming and smells a bitt gassy in addition to the tangieness. The yield is also definitely not disappointing. Plant 1: 76gr Plant 2: 68gr Plant 3: 65gr Total:209gr I am happy with that. Especially since it's my first LED grow.
Likes
11
Share
@Mazgoth
Follow
Too much stress,really cold environment,some times with the grow light off the temperature is around 13/15C and the air goes direct to this plant because the fan is close enough,the Plant doesn’t give up and has some over feed too,idk why but I’m using nutrients after 15/20 days and half of dosage that BioBizz says and I still have over feed a little bit and nutrient lockout maybe because I’m using some Bio Molasses Blackstrap but if I’m using molasses I’m not using bio grow and I’m using like 3/4ml per L.The LST is because the plant got really tall that the grow lamp couldn’t go higher because of my grow tent size and I needed to break the top cola.
Likes
15
Share
Place these seeds in the paper towel literally 24hrs later the tap roots were nice and long. I then placed them in jiffy pods and within 24 hours this is how they looked. So far amazing from what I see. Shout out to fast buds!!! This will be ram in the growace Aircube system.
Likes
13
Share
They looking Fire all over smell is amazing Bluezy has not the bud Strukture im looking for and does Not Look Like the biggest yielder but man the smell is Crazy like really Crazy chemical sour blueberry light bleaching on one bud Dante’s Inferno buds are Rock Hard and slowly reaching the size of soft drink cans, and the node spacing is insane golfballs all the way down The smell is like a tropical runtz super sweet fruitmix Tomb raider has just amazing plant structure amazing bud Structure is a trych Monster and the smell goes towards sweet sour gelato Kinda direction
Likes
22
Share
I am shocked at how beautiful these nugs are...I have never seen so many fat nugs in my life. Sticky, dense. I can wait until they are dried and cured. Update: found some mold on 4 of my nicest nugs, so i trashed them. A real shame. I had to go away for a few days and i think it was a combo of having dense colas, with a humidity around 60%. Live and learn for next grow. Still have plenty left.
Likes
16
Share
@BLAZED
Follow
Week (21-10 to 27-10) 21-10 Temps: 19.4 to 26.6 degrees Humidity: 47% to 66% 22-10 Temps: 18.2 to 26.5 degrees Humidity: 42% to 64% Watering: 2000 ml. There are only 1/2 weeks left before harvest, so i will stop with the nutrients and will only give her water from now. 23-10 Temps: 19.4 to 26.2 degrees Humidity: 47% to 66% 24-10 Temps: 19.2 to 26.8 degrees Humidity: 45% to 66% Watering: 2000 ml. 25-10 Temps: 19.5 to 25.9 degrees Humidity: 46% to 67% 26-10 Temps: 19.8 to 26.5 degrees Humidity: 46% to 66% 27-10 Temps: 17.9 to 26.2 degrees Humidity: 44% to 67% Watering: 2000 ml.
Likes
19
Share
@HisHope
Follow
6/28 Week 10 and she is looking fantastic Flush continues, nothing special just one gallon of h20 twice a day. Looking at at least 3 days as tricones still at less than 100% white (@80%) Deficiencies not bad yet, still building some bud 6/29 Looking well, just a bit of CA/MG def showing. Still building Some lights out pics to show off the buds and trics **** We have determined that best practice on coco DTW is to add a low dose of Cal-Mag once a week when in final container. This will satisfy the cation sites as the coco breaks down and avoid mystery CA deficiencies allowing the CocoTek to do its work. 6/30 Just some Bud Pics 7/2 HARVEST DAY TOMORROW!
Likes
6
Share
@XanHalen
Follow
Officially week 7 Dec 31: Came back a week later to very heavy pots, needed 36 hour drying period, not happy, smaller plant has tips of leaves curling down, some like taco, dryed out the pots and went back to normal conservative feeding, need to fine tune the auto irrigation setup before I use it again for sure. All in all, nothing crazy happened. Really cool to see a plant be small, but way bigger after a week of vacation. First grow seems to be going pretty good! PS: I think my hygrometer is broken, saying 85-100% RA even when I significantly improve airflow and it doesn't seem anywhere near that. Gonna do the salt paste test on the hygrometer . Jan 1: I recalibrated my hygrometer and it’s working great, weird leaf curling of smaller plant still happening but seems to be improving, big plant is frosty and fat for week 7, seems to be at same stage in development as smaller plant but the pheno is beautiful.
Likes
14
Share
Day 63 Today marks day 63 of flowering and the plants are really showing their final form. The buds have packed on a lot of weight over the past week, and the colas are looking dense, swollen and sticky to the touch. The pistils have mostly changed color now, with a good portion curling in and turning orange and amber, which gives the flowers that mature, finished look. When I check the trichomes under the loupe I can see that the majority are cloudy, with just a few still clear and the first signs of amber starting to show. This is a good sign that the harvest window is opening soon, though I’ll probably let them go a few more days to really finish and develop that extra potency and flavor. The smell is very intense at this point. Every time I open the tent I’m hit with a strong wave of aroma that’s a mix of sweet, earthy and slightly fruity notes, depending on which plant I’m leaning into. It’s sticky enough now that just brushing against a bud leaves resin on my fingers. The leaves are starting to fade naturally as the plant finishes up, showing yellows and some purples, which also makes the buds stand out even more. I’ve stopped feeding nutrients and have been giving only plain, pH-balanced water to let the medium flush out. Runoff is looking clean and the plants seem to be using up the last of their stored energy. Temperatures and humidity are steady, and the airflow in the tent is keeping everything fresh with no signs of mold or rot, which is always something I watch carefully this late in flower. Overall the garden looks amazing and I feel like I’m right on track for harvest. The next week will be about patience and daily trichome checks until I see the balance of cloudy and amber that I’m aiming for. It feels like the long wait is finally paying off, and the excitement is building to finally chop, dry, and cure these beautiful buds
Likes
4
Share
@Simba732
Follow
Week 6 Complete. Everything is going well She started giving out a citrus smell, it’s lovely She drinking a bit more and don’t seem to be stretching much. Onto week 7
Likes
102
Share
D35 - The first day in the first week of flower. She was getting thirsty, so I gave her 1.2-liters of water @ pH 6.2 and, as always, she drooped after. My old humidifier died on me, so today, I got a new one. It's a smaller version of the one in my other tent, and it is the cutest little thing, but hey, it doesn't need to be mighty for that tiny tent. I also got a new Inkbird to keep the RH constant. I already use one of those in my other tent, but I opted for the WiFi version this time. I shouldn't have bothered, though, as all it does is display the RH but doesn't allow the app to control the Inkbird. Pointless as I already have remote temp/RH monitoring. D40 - Today, I did some more LST and light defoliation to ensure proper airflow. The canopy shadowed the leaves I removed, so they weren't contributing much anyway. I've increased how much light she is getting since she is in flower, but I have to be careful due to the younger Chocodope girl in the same tent. Currently, I'm reading around 650 PPFD at canopy level but will increase that over time until I hit about 900 PPFD. Finally, I gave her about 0.6-liters of water @ pH 6.5. D41 - The end of the first week of flower, and all is well.
Likes
6
Share
@rvabudman
Follow
The plant took off this week. I am relatively new so was working through getting my PH measuring/balancing down. Now that I have established a better method the plant responded well. Put in a scrog to help even the canopy for the future. The other plant I have running is a bubblegum autoflower that is a few weeks older (right). Personally I really loved the look of the gold leaf at this point, it had a very nice spiral look to it almost like an xmas wreath.
Likes
5
Share
La planta más grande ya va casi en su 5to nodo! Se agrego paja en la superficie de la maceta para que el sol no penetre directamente en el sustrato para evitar que se forme una capa dura El sol ha estado bastante picante
Likes
Comments
Share
Likes
8
Share
Everything is going well I got a raptor hood for my 600 watt so I was able to drop my light right on top of my plants maybe 6 niches away . Noticed she was getting a bit lighter in colour so I brewed up a tea first 1 ever just switched to organics tea looked good hopefully not 2 strong . I also pulled some branches out to open up more branches to get light as she was bushy and I did not want to cut most of the branches off because I'm not trimming larf lol. Now it's smooth sailing to the end I got 1 more top dressing next week and all I gotta do is water once a week
Processing
Likes
25
Share
First week flower underway. Added liquid Koolbloom. Way down on the base nutes, this and my other girls have been showing signs of a few things. 1.Nitrogen toxicity. It was commented on my last grow question that the leaves on my Gorilla Glue grow looked like they were heavy in nitrogen. I did the research and it looks like they were correct. Dry crispy leaves, heavy dark green. They and now myself blame the full strength Advanced Nutrients, noting they are high in Nitrogen. 2. pH issues. I also started noticing a lockout isssues, like red stems. I initially thought it was a strain specific trait, but again was recommended to test my runoff - it came out around 4.5🤮. Ive been watering heavy at 6.7 now with lime on top. Hopefully will help. Also, new Meizhi 450 on the way! Really impressed with my other one and the size accommodated my space very well. My flower room is like a L shape
Likes
34
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 These girls held up pretty good while we were gone..They still look too dark/overfed but already well into their flowering stretch and have surpassed the other strains in height despite being the smallest plants this entire run...but we're still expecting the typical kush "golf ball" yields lol...They're all showing signs of a slight calmag deficiency (or light stress?) so we gave a full strength shot of calmag earlier today, raised the Solux about 3 inches and will document any change next week... The light is currently at 75%, we'll keep it here until their stretch is over and finish the grow at 100%... I'm blown away at how good the Solux350 is at lighting up an entire 4x4 despite being the size of a shoebox, its a star in a jar lol.. not too much else to report, looking forward to their color bouncing back..thanks as always for dropping by and happy harvest folks!! 🤘😼❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_