Vote Now 🏆 for the Grow Awards 2025!
Likes
13
Share
@TheKydd
Follow
YEEEEEEAAAH BOOOOOI, my fabric pot arrived as i expected so i re-potted my baby about 8pm tonight, i used the same CANNA TERRA PRO Soil as before to fill the fabric pot (Soaked it in water then let to drain) and the transplant went smoothly. A video and photo have been uploaded showing it in its forever pot, and i also installed a proper oscillating fan. 14/09 Checked in on the baby this afternoon and looks like shes handled the re-potting just fine which is great news! Everything else is as per usual so will just throw some update photos on. 15/09 Today I checked in on the baby as usual and everything's looking great, she grew a noticeable difference although that's hard to tell in the photos. I gave her a good watering so the humidity came up to 70% for a short time but that's nothing to worry about. Temperature sat around 22 degrees Celsius all day. Photo's show the top and side views for reference. 16/09 Once again the LSD baby grew a nice amount over the day and is looking stout and healthy. The stem is already hardening off and very thick for its short size so i decided to begin to pull her over using LST as i will need to focus on keeping my plant growing low and across due to the space available in my cupboard. Everything went well during the LST so i have put photos up showing what i have done. Temp and humidity is usual. 17/09 Today after work i decided to finally get the mylar roll out and patch the ends of my cupboard as it was pretty rough with tinfoil. I cut out cardboard walls to shape of the existing ends and then lined the edges with carpet tape. I had someone help hold one side and we just placed it down swiftly flat onto the card. This mostly pulled it tight but its not perfect. Other than that, everything's going as per usual and i've uploaded some update photos 18/09 Nothing much to update today, everything's looking good. The weathers been pretty shit so the humidity is up but thats not a worry right now and summer coming up will eliminate that problem. Have updated a couple of photos, basically the plan is to train the plant along the cupboard as low as possible before tipping. This way i can utilize the short spaced cupboard. 19/09 Updated the photos! Everything's looking good, the temperature that is showing is the evening temperature 'which is affected slightly as the cupboard is in a garage. A little low but will only get better as spring comes in. 20/09
2
9
Share
@Dabking
Follow
Plant #3 chopped on day 72 Plants #1/2 have a bit longer to go
Likes
2
Share
@Clemo
Follow
First in water, then transfered to a paper towel. 2-3 Days in only two opened up , I dropped all into the soil - eventually the last one also germinated. Eventually, 2 weeks in, they were still not growing much.
1
1
Share
@Dabking
Follow
Heat stress and few other issues. Was away for quite a few days so that hurt a bit. All things considered, she is doing great.
2
10
Share
Growing it was quite a journey. Since I had a lot of changes in my life, I couldn't take the time I wanted to make a good diary, but I still managed to take some pictures. I had some problems since I changed the size of my pots and didn't use LST. One plant grew so tall that it went above the LED, and other plants were too close to the LED. Using three 20L pots in a 60cm x 60cm space was too much; they didn't have enough room. For the next grow, I'll use only two pots and employ SCROG and LST
Likes
4
Share
@Zelfiris
Follow
Hello! I was absent for most of the grow and unable to properly fill out my journal but my caretaker did a great job following the directions I left. This is my 5x5 tent containing four 5gal sites in a RDWC loop with SE7000 led light. Fed General Hydroponic 10 part @ light strength. Seeds started 2/3 and chopped 4/12. Only training was a topping on week 3 and defoliating after the flower stretch. Not going to lie, I was so hyped to grow this strain that I began growing unimpressed when it seemed the cultivar it shared its space with was outshining them…but I gave the amnesia zkittlez ~2 more weeks and it really turned around. What seemed like just a jungle of loose leaves actually packed on some thick mass and accumulated the most intoxicating aroma of the taste of skittles I didn’t think possible from a plant. Of the 4 plants - 2 are amnesia zkittlez (on the right side in pic). They yielded 816g! 486g of nice buds 103g of trim 330g LARF / lower buds! Total RDWC 5x5 grow was 1429g! It’s only been curing for a couple of weeks but I’m really impressed by the terps and how enjoyable the smoke is! I would definitely recommend and grow again! 👍 Thanks for stopping by!
Likes
36
Share
@Chucky324
Follow
Hello. This is the end of veg and the first week of flowering, starting tonight. Man what a cold spring around here. We had a week of over 21* c through the day. But the last couple of weeks have been cold, barely getting over 13* c through the day. I didn't open the tent till noon because it was raining here. So, these plant will be going into flowering tonight. I'll be lowering my bamboo type of net later this week that will hold up the big BlackMoon buds. Got 2 males to work with this year. Panty Punch and Pinoal Kush (my own cross) These males should make some good seeds this year, they are "FREE" if you want to do a diary on them. I use a 3 dollar international stamp and a Christmas card to get them to you, I just want a diary done in return. The plants inside will be put into flowering a week after the ones in the greenhouse. I know it will take me a week to harvest the ones in the greenhouse. The plants in the greenhouse all got a big drink of rainwater last night and all had their first overflow into the reservoir. I'll be mixing up some flowering nutrient for the next watering. Well, that is the end of the FFFB comic book. Hope you enjoyed it. He's one of my favorite artist. I'll find something else weird to show you next week and for the rest of the diary. Ok. Be Great. Chuck.
Blackberry Moonrocks® · Anesia Seeds
Fission 300W · Philips
Mars Hydro TS600 · Mars Hydro
Filtered Water ·
Filtered Water. ·
Filtered Water. ·
Filtered Water. ·
Filtered Water. ·
Filtered Water. ·
Pour & Feed Plant Food · Miracle-Gro
Big Bud Powder · Advanced Nutrients
Microbes Bloom Stage · NPK Industries
Microbes Grow Stage · NPK Industries
H.O.G. Grow · Innovating Plant Products
H.O.G. Micro · Innovating Plant Products
H.O.G. Bloom · Innovating Plant Products
Karbo Boost · Green Planet Nutrients
Cal-Mag Plus · Botanicare
Sweet Raw · Botanicare
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
General Hydroponics - Diamond Nectar 0-1-1 ·
Chitosal.com ·
EnzymesKomplete.ca ·
ReindeersNatural.ca - Canadian Liquified Seaweed 0.6/0.2/0.6 ·
Bud Candy · Advanced Nutrients
Liquid Seaweed - www.reindeersnatural.ca ·
ww.EnzymesKomplete.ca ·
www.ChitoSal.com ·
Diamond Nectar - General Hydroponics ·
Liquid Seaweed - www.reindeersnatural.ca ·
ww.EnzymesKomplete.ca ·
www.ChitoSal.com ·
Diamond Nectar - General Hydroponics ·
Flushing with PH adjusted tap water. ·
Flushing with PH adjusted tap water. ·
Flushing with PH adjusted tap water. ·
Likes
2
Share
@aquaMan
Follow
Premise was to see how "optimal" i can get my first ever Grow. After some Research i came up with the idea to build an Aeroponic System myself using Water Buckets and Venturi Injektors to provider proper aeration. Sadly Seedlings had to wait in EazyCubes cause some parts and Nutrients didnt arrive on time. System was fully operationable on Day 16. Atami Nutrients are inside the System since Day 24, Calmag has been added Day 28. Before that, some Tri-part Nutrient. Planning on switching to Plagron in the Long run, as well as adding Co2, a water chiller and a ~700W LED. Stats: - 5 30L Buckets, 4 Plants and 1 Reservoir - Recirculation happens through 90mm PVC pipes - 16000 l/h pump going through 4x 1" Venturi Injektors pulling around 700 liters of Air per hour - 1mx1mx2m Growtent - 250W The Jackson Nemesis LED Happy about any Questions and Suggestions!
Likes
2
Share
@aquaMan
Follow
Premise was to see how "optimal" i can get my first ever Grow. After some Research i came up with the idea to build an Aeroponic System myself using Water Buckets and Venturi Injektors to provider proper aeration. Sadly Seedlings had to wait in EazyCubes cause some parts and Nutrients didnt arrive on time. System was fully operationable on Day 16. Atami Nutrients are inside the System since Day 24, Calmag has been added Day 28. Before that, some Tri-part Nutrient. Planning on switching to Plagron in the Long run, as well as adding Co2, a water chiller and a ~700W LED. Stats: - 5 30L Buckets, 4 Plants and 1 Reservoir - Recirculation happens through 90mm PVC pipes - 16000 l/h pump going through 4x 1" Venturi Injektors pulling around 700 liters of Air per hour - 1mx1mx2m Growtent - 250W The Jackson Nemesis LED Happy about any Questions and Suggestions!
Likes
2
Share
@aquaMan
Follow
Premise was to see how "optimal" i can get my first ever Grow. After some Research i came up with the idea to build an Aeroponic System myself using Water Buckets and Venturi Injektors to provider proper aeration. Sadly Seedlings had to wait in EazyCubes cause some parts and Nutrients didnt arrive on time. System was fully operationable on Day 16. Atami Nutrients are inside the System since Day 24, Calmag has been added Day 28. Before that, some Tri-part Nutrient. Planning on switching to Plagron in the Long run, as well as adding Co2, a water chiller and a ~700W LED. Stats: - 5 30L Buckets, 4 Plants and 1 Reservoir - Recirculation happens through 90mm PVC pipes - 16000 l/h pump going through 4x 1" Venturi Injektors pulling around 700 liters of Air per hour - 1mx1mx2m Growtent - 250W The Jackson Nemesis LED Happy about any Questions and Suggestions!
Likes
24
Share
Likes
2
Share
@patbur
Follow
The plant started stretching out a lot more as opposed to last week. A lot more bud sights growing. Has got a thick stem to it. Overall really happy with it, considering the starting conditions.
Likes
2
Share
@Clemo
Follow
Week 2 since they suddenly explored in growth. Since I have a very small tent, I just started the LST. Realised some yellow leave. Maybe due to light burn. Turned down power a bit to 40% and height increased to 25cm