Likes
Comments
Share
So heres my germination method. Soak/shake seeds in 3% h202 solution for a few minutes and let sit until tiny bubbles form on seed coat. Rinsed in clean rain water. Then placed in HPO's GREEN-SUPREME used as seed soak solution. With a small amount of ANTI-MATTER for enzymes. Soaked 12hrs (mostly I just soak a few hrs) Straight into Gro-Dirt Super Starter soil. Watered seeds in gently with diluted DARK-MATTER solution to get the mycorrhizal species attached as soon as possible. Once they came up, 18-24hrs later, sprayed gently with a mix of GREEN-SUPREME & RHIZO-MOJO Just a small pinch of both in a 1ltr spray bottle. All this was done in a dark warm place on a heat mat. In a humidity dome. https://www.highpoweredorganics.com/ Happy growing friends 🇦🇺🇦🇺🇦🇺
Likes
5
Share
@alafmalaf
Follow
I got a smart plug for my humidifier and modded the button with an Arduino so that it turns on automatically when powered. Now I have events in my home Assistant on raspberry pi which will keep the VPD within a specified range. Every since then, the plants have been SO much happier and I have piece of mind now. I'm hoping these plants can pull through the stress, but I planted 4 more bag seeds just in case, they will sprout soon. I did some LST because why not. Accidentally broke a stem but I squeezed it together so now I have to pray.
Likes
42
Share
hello everyone, fantastic weed friends! It's hard work in peaky's gardens!These beautiful wonders grow healthy and vigorous and I hope their cycle will remain balanced throughout their life I'm testing a new line of fertilizers that I've never used before...and I think they and I have done a great job to date
Likes
45
Share
"Mens Dei" What can be made to expand, airy and loose, can also be made to contract, dense and tight. Trichomes do not discriminate, although we like to think of trichomes' primary purpose as being to get us high; they are there to provide photoprotection (sunscreen). Trichomes apply themselves based on area dimensions; the more area = the more trichomes in order to protect. Different from density: Trichomes, the resinous glands on plants, are often produced in response to stress, including high light intensity. This increased production can lead to denser trichome coverage on the plant, stress, stress, stress, stress is the signal. There is a certain beauty in watching the large water-filled buds once swollen to the brim slowly shrink during drying, as the surface areas contract, the trichomes just cluster up to form denser and denser coatings, already dense from high light intensities, UVB exposure, and IPS, and every other stressor I could tweak. Trichomes, the resinous glands on cannabis plants, are often produced in response to various forms of stress. These stresses can be environmental, like excess light(HIL) or UV-B radiation, temperature fluctuations, or drought, or mechanical, such as wind, pruning, or even the weight of the plant's own buds. The plant reacts to these stressors by increasing trichome production as a defensive mechanism to protect itself and its valuable compounds like THC and CBD. In essence, cannabis plants perceive stress as a threat and respond by producing more trichomes as a way to protect themselves and their valuable compounds. Several studies have shown this. Not so much a "master" grower as a master of stress. Psssst. Trichomes fill with "antioxidants," including THC. Ant"ox"idants, The production of antioxidants in plants is intricately linked to their oxidative apparatus. The plant has limited oxidative capacity/apparatus. During daytime photosynthesis, a large percentage of that oxidative capacity is tied up in protecting the plant. During the night, plants alter their metabolic pathways. This leads to a far more focused production of specific antioxidants, like THC. Plants also produce antioxidants during the day to scavenge ROS made from photosynthesis. The differential ROS production by blue and IR light can have significant biological consequences. For example, high levels of ROS induced by blue light can lead to cell damage and death, while lower levels of ROS produced by IR light may be involved in beneficial cellular signaling pathways. Long nights under the IR (very low ROS), the boost in cellular respiration, and the boost in energy production. In a perfect world, I'd give the plant a shock treatment of 60DLI in 4 hours and give her the other 20 hours to perform cellular respiration under IR. The stress of those 4 hours would be rigorous and full of stress abound, 1800-2000ppm CO2 is easy for a couple of hours during daylight, it's maintaining it that's hard, but 4 hours is very doable with nothing but a little extra "carbon sugar" in your medium every other night during the first 4 weeks of flower. In my opinion, you only need to jack CO2 for those first 4 weeks of flower to see maximal output, after that it's all about trichome preservation, everything else comes second. Without the temps to assist with metabolism, CO2 is reduced to normal levels along with temps 4-5th week of flower. Buds are primarily composed of water. Developing flower buds, like other plant tissues, require a significant amount of water for growth and turgor pressure, which helps maintain their structure and firmness. Turgor pressure in plant cells is primarily generated by osmosis, but transpiration plays a crucial role in maintaining it. The optimal internal leaf surface temperature for photosynthesis at 1800-2000ppm CO2 is likely in the upper range of 97°F, meaning ambient would need to sit at 102°F-ish or thereabout for full metabolic utilization. That's putting your transpirational pulling force x5 x6 maybe x7 of what it would be if she were cruising at 68F. "My buds won't fatten, what can I do!!" Crank it. If your purpose was to blow up a balloon as fast as you can, as much as you can, would you use 2x force or x5 Force to do so? Bad analogy, but you get the idea. Kiss. Optimize photosynthesis & VPD by day, cellular respiration by night. TECHNICALLY: "While transpiration and cellular respiration are both ongoing plant processes, they are not neatly separated into day and night. Both processes occur both day and night, though at different rates and with different emphasis. Transpiration, the release of water vapor from plant surfaces, is primarily driven by sunlight and photosynthesis during the day, but it also continues at a lower rate at night. Cellular respiration, which provides energy for the plant, occurs continuously, both day and night. " A leaf can perform cellular respiration and photosynthesis simultaneously. During daylight hours, plant cells utilize both processes: photosynthesis to produce glucose and oxygen, and cellular respiration to break down glucose and release energy for the cell's needs. The products of photosynthesis (glucose and oxygen) are used as reactants in cellular respiration, while the products of cellular respiration (carbon dioxide and water) can be used in photosynthesis. The limiting factor is the oxidative capacity; the less a leaf is utilizing photosynthesis, the less oxidative capacity it uses, and the more it can perform cellular respiration. Even if a leaf is not in an optimal photosynthetic position, it can still utilize respiration to its full capacity during daylight hours. Kinda too much info to explain when some asks if they should defoliate or not, yeah add calmag or some shit. BUT Only 10% ATP can be processed through photosynthesis and carbon capture. 90% of ATP is processed when the plant's oxidative capacity becomes available (NIGHTTIME). Cellular respiration relies on the process of oxidation to generate energy. Specifically, the final stage of cellular respiration, called oxidative phosphorylation, utilizes oxygen as the final electron acceptor to produce a substantial amount of ATP, the cell's primary energy currency. Factors such as oxygen concentration, glucose availability and temperature will all impact the amount of aerobic respiration an organism will perform. See you next grow, *twiddles thumbs*
Likes
1
Share
hello everyone, I thought the plants were already big enough and switched them to flowering. A shivaki (Three A Light) type of training was conducted for 27 days and after a day the plants recovered from stress and since this quarrel is going well, I thought that it was impossible to wait any longer. I expect to harvest in 70 days
Likes
3
Share
@Trinidad
Follow
20.06 25. Day 30 Took some leaves off lower part of plant. Used plant training clips to bend branches in effort to LST. I will update tomorrow. One love 🏼
Likes
6
Share
@Kinary
Follow
day 22 - nothing day 23 - watered with 700 ml of water and 4 ml of my own biofertilizer, I also did defoliation and LST day 24 - nothing day 25 - I did Topping and defoliation day 26 - nothing day 27 - nothing day 28 - nothing
Likes
7
Share
@Bluemels
Follow
Tag 58: Die Blätter der beiden Pflanzen sehen zwar nicht so gut aus, aber die Blüten um so besser!😍
Likes
12
Share
@DBQush
Follow
Dear diary, Week 2 done and on the books! Everything went mostly fine up until the very end of the week were I noticed some strangeness with another one of the strains in the tent. More info on that will be in my other diary for Gorilla Cookies and will be covered more overall in next weeks update as I try to fix any potential issues. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀 ⏰ Day 11: Calmag foliar applied 2 times during the day at 0.8ms and corrected ph to 6.3. They also got their regular feeding at 1.27ms 6.4ph with me increasing the light to 250ppfd. ⏰ Day 12: They were given a foliar and watering of calmag water at 1.13ms and 6.3ph early in the morning as issues had not cleared up. Later in the evening they got a regular feeding at 1.41ms, 5.9ph and lights were increased to 275ppfd. ⏰ Day 13: 2 calmag foliars, gave feeding at 1.54ms 5.8ph and increased lights to 285ppfd ⏰ Day 14: They have reached 3 nodes marking the end of seedling stage and beginning of veg! They were fed with 1.53ms 5.8ph and four 3 liter airpots was prepped with 75/25 coco/perlite and watered with the same feed until runoff before transplanting. As I can only grow four plants W.C #1 and #3 were selected as the final two. Temps are around 26 and RH 75% with lights on and 24C 80% off. Will be taking down the RH slightly over the coming few days to 65%. ⏰ Day 15: Gave the girls a feeding at 1.57ms 5.6ph. Also increased light to 305ppfd and they do look a bit droopy, but that’s not to surprising after the transplant. ⏰ Day 16: Daily feeding at 6ph 1.59ms and increased light to 320 ppfd. Aiming for 465 ppfd by the end of next week as that would move us up from 20 to 30 DLI. ⏰ Day 17: Sprayed a foliar coat of Leaf Coat from Biobizz as prevention for pest in the morning. For the evening they got their feeding at 1.58ms 6.2ph and foliar spray of calmag as a plant of the other strain in the tent is looking a bit odd.
Likes
72
Share
@BodyByVio
Follow
It was a longer road until here. With all the reading I did I still made rookie mistakes. To much nutrients and to much light stunt my plant and created some deficiencies ( CaMg). Hopefully I will do ok from now on.... Lifted the light at 3 feet on 100% power and decreased the PPM’s to 600. Hopefully that will help and I did not create to much damage. Wish me luck. I invested a lot of time and money on this grow but the experience is not there yet. I’m ok with what it is, I’ve learned a lot from this grow.
Likes
25
Share
@Sators
Follow
Hi folks. Day 29 does again topping for two previous topped branches. Same nutrients. Day 32 does some bottom leaves trimmed. Day 35 does set up net and watering with 2L nutrients mix.
Processing
Likes
11
Share
Likes
4
Share
First week of flowering and I can see them all growing tall gaining a few cm/per day. First set of pistils are visible on all 4 ladies. I started adding Terra Bloom 2ml/L every other day.
Likes
34
Share
great strain hard buttons heavy total life of 88 days. 84 after being born, besides having broken it will give me a good yield I will wait 90g to dry, for an automatic with 5.5 liter pot I think this is great. easy to grow very, very cold, sweet, sour, aroma, I'm happy .. final summary the lady still gave me 110g dried without branches and leaves very clean .. I am very very satisfied with the result both in the quality of the herb and the yield @Fast_buds @spiderfarmer @advancednutrients @growdiaries
Likes
3
Share
@Tower84
Follow
Der Grow neigt sich dem Ende, die Pflanze zeigt eine schöne Herbstfärbung und es sind erste bernsteinfarbene Trichome zu sehen. Ich gehe davon aus, dass ich in den nächsten Tage ernte werde. Ich gieße seit ca. 1 Woche nur pH angepasstes Wasser. Hier und da habe ich bei den obersten Headbuds Foxtails, weil der PPFD-Wert dort zu hoch war, aber das sind nur Schönheitsmängel. Der Besatz an Trichomen und die Kompaktheit der Blüten sind sehr gut. Aber am besten gefällt mir der Geruch - extrem süß blaubeerig, dieser durchströmt beim Öffnen des Zeltes mein ganzes Zimmer.
Likes
21
Share
@Swiftgrow
Follow
# Day 50 today from seed happy with the progress for my first indoor grow, learnt a lot. Wedding cheesecake producing some nice big buds West coast OG is maturing the best starting to see some nice colours Sour goo poison is stunted but she is still flowering okay 👌
Likes
5
Share
@Chubbs
Follow
Weekly update on these ladies. 2 of the 5 are doing amazing, super bushy and healthy as all get out. The other 3 are good but 2 aren't as bushy and the 1 that's in the Cannpot isn't liking the heat at all. But over all they're all showing growth weekly and progressing nicely. Over all they're doing good in this 100'f heat not skipping a beat. Happy Growing.
Likes
5
Share
Smooth week to be honest. Nothing major to report. Growing green and are stretching well. Fertilizers. Plagron: dropping the grow and roots fertilizers. Only feeding bloom, power bud, and vita Race this week. I hope this smooth ride continues till harvest.