Plants recovering well …heat is causing some problems in the indica room otherwise all is well …1 more week till flush then 1 more week after that til harvest

Всем привет! Вот и прошла ещё одна неделя. Растение растёт и развивается. Шишки наливаются. Стоит очень интресный аромат, с фруктовыми нотами.

Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]

WEEK 8 Finally calibrated my ph meter and get everything sorted. Ph is now 5.5 but it should slowly building up to 6.0 I lightened the feeding because of some signs of overfeeding but nothing too dramatic. Very strong citrusy smell. One of the plants is incredibly frosty for it's age and all buds look pretty dense so I can't wait what is gonna happen over next few weeks. Giving them pretty much max recommended dose of CANNA BOOST so I hope it's gonna give me some good results in terms of taste and smell. :) Oh and I finally got new 600W bulb

Hello Diary. Here we are at the end of the last, seventh week of flowering for the Haze Berries. Their roommate Fat Banana is now drying in a box between them. 😎 Although there are two Haze Berries on the “farm,” I only photographed one for the diary. I do too many photos with one anyway, with two it would be really too much. But before the harvest I will take a few photos and another Haze Berry. 😉 Basically, the Haze Berrys exceeded my expectations, they grew big beautiful plants full of flowers. This will be perhaps the biggest yield for me so far. 💪 As can be seen in the first photo where all the plants are, it can be seen that the Haze Berrys did not grow even remotely similar. The second Haze Berry has grown twice as short as the first. The structure of the plant itself is different, but will be seen in the final photos. Watering is every three days, the last two weeks I water with clean water which I regulate p.H at 6.3. Conditions on the "farm" are almost ideal, the temperature in the Box is about 25, 26 degrees, the humidity is about 40%, sometimes even lower. Now everything is ready, here and there I see some brown trichomes so I will still have to wait a day or two until harvest. 😀 Here’s what the last week of flowering looked like. 28/11/2020 - Day 65. Watering. I regulated the p.H of water to 6.3. Temp / Humidity on the farm - 25.5 degrees and 40% humidity. 1/12/2020 - Day 68. Watering. Like three days ago. It was the last watering for Haze Barry before the harvest. Temp / Humidity on the farm - 26.3 degrees and 37% humidity. 3/12/2020 - Day 70. Usual photography for the end of the current week. Temp / Humidity on the farm - 25.6 degrees and 40% humidity. In the end I can say that I am very excited about the harvest, it will be interesting to see the outcome in the end. Stay connect, and thank you for supporting all this past weeks. And sorry for so much delay with the posts but I have a bunch of photos to edit. So when other obligations come together, then this is what it looks like. 🙏

Beginning of week.. I did remove a few fan leaves.. I also only adjusted the very top branches.. The very lowest branches are completely untied and have only had some HST but recovered a little too well.. The stems have straightened back out and are all knotted up.. Damnit.. Same issue I faced in my last grow.. I should just stop being lazy and tie all the damn branches down.. But all this week I will be adding more training.. Kinda slowly.. Not for any reason, other than it takes a while and I need to make time for it all lol.. It should get done in the next 2 - 3 days and she should be ready for her next photoshoot (mid week pics)! Went ahead and added in some FloraBloom.. She wasn't getting much P.. So I pee'd on her LMAO im just kidding.. Just adding a half dose of FloraBloom to take care of the P issue.. I need to start watering/feeding daily.. She seems to be drinking quite a bit more.. Which would make perfect sense duh! Lol Next day... Went ahead and adjusted 4 branches.. Tying down the bottom 2 that were left untied.. Now she is all tied down lol... Looking flat as fuck! I love it! One branch was beginning to crack.. So I eased up on it.. But still bent the very top of that stem down a little.. So the lower branches should still be able to catch up.. She is going to be a seriously gorgeous, thick bush lol Mid week.. Doing good.. Still just watering, feeding, watering, feeding, etc.. What I do is I feed one day, wait 2 days and water, then feed again the next day.. Then wait 2 days and water.. The point of doing that is so she has more days of nutes than with less nutes.. Idk.. Just my take on it.. She is becoming such a gorgeous bush! End of week.. She is getting so bushy. Going to have to flip to 12/12 tomorrow and also put her in a 2'×2'×5 CoolGrows tent.. This is not what I wanted to do.. But this is a last minute decision.. Hope it works out still

This clone is look I wonderful. In my opinion it's further along than the mother plant was at this week of flowering.

Neues Licht hinzugefügt. Uv und Deep red von Mars. Gesamt aktuell 500 Watt. Uv Max 90 min am Tag .

Always R.O Water Watering the plant 3 times for per week 1st flushing. (15 ppm) (03.04.2023) 4 liter with Flaskleen Drain 1700 ppm start 2st flushing. (15 ppm) (05.04.2023) 4 liter with Flaskllen Drain end 400 ppm :) -Day76 watering (250 ppm)(08.04.2023) 4 liter with Drykoolbloom(2-45-28) 0,39 gr/L and calmag xtra 1ml/L I had to do Defoliation:( 1000 ppfd

Buds getting thicker now. Doesn’t look the best due to the overdose but is frosty and will see how she smokes.

J'ai lancé la floraison le 24 avril !! J'espère que mes plantes vont faire de belles fleurs 🌱🌴

Big fat buds! Last week before harvest, this pheno is very RS11 dominant which makes it my favorite in my growbox. Trichomes are around 10% orange which for me means we are almost in time.

Changed my plans a bit so they probably won't move to another location ( or they really have to outgrow their current pots... ) so added some additional lights and raised my EC a bit. Also added CO2 to 900PPM but not sure if continue with that. First time CO2 out of a bottle instead of a generator. If it is too pricey I will quit that. 07-09: YES!! I have an extra room available so I am moving these ladies to a bigger place.. will keep you up to date.... From 5.7 to 30 liter pot size (a bit late to switch but I do believe they can profit from it.) A few hours later.... Well, that's not easy at all... taking a break for a moment... Checklist for myself: The tent is up and checked for leaks (ugly thing, but no complaints for fifty bucks) Lighting is installed at the correct height CO2 is in place, needs to be moved to the right spot Exhaust is installed (still need to tape the transitions) Still need to install Blumat (but first repot the plants due to positioning) Install the water supply (yes, I should have done that first...) Meh... another hour or two. Hopefully, they don't mind being without light for about 3 hours. A few hours later.... Well, that was a lot of work... but thank goodness it all worked out (just need to install the Blumats, which I'll soak in water shortly). Besides that, I now have a water supply and drainage available, which makes certain tasks much easier. Hand-watering was pretty fun (the plants were doing well so far), but it was a lot of work for 12 pots. Having to use a syringe every day for dosing just isn't my thing. The plants are suddenly looking very small again, though. But well, now they can literally grow in any direction. I'll quickly check how they did overnight, and then the lights will be going out again soon. And then quickly took some photos just before the lights went out... The ladies seem to be doing just fine, with their leaves happily pointing upwards as if they're waving cheerfully. The CO2 has been used up quite quickly; the bottle is empty, which isn't surprising given the large tent. I'll refill the bottle shortly and see how long it lasts this time. I think trimming will be a bit easier this round. Tonight, I'll lower the lights a bit to around 30 cm and hope they can handle the doubling of the light intensity. They were doing well last night, at least. The temperature is on the high side (33˚C), but that's not surprising given the current outdoor temperatures. I expect that once we have normal temperatures again, the temperature will settle around 29˚C. #SSSC_John Thank you very much for this outstanding strain so far...

AM3 was a bit of a leaf monster, but it was a smaller plant that finished after just 7 weeks of flower. AM2 brought the beef and is stacked top-to-bottom. Have some minty aroma at harvest, but we'll see how that progresses as it dries and cures. AM3 is already in the curing bucket and still has some mintiness. Being a smaller batch of buds, it was dry after 9+ days. Definitely a variety that benefits from a few weeks of curing. Still had a little grassy smell on AM3 as it entered cure. I expect these to be good smoke.

En esta etapa no agregue ningún nutriente a la solución para evitar que la planta tenga gusto al nutriente, así dicen los expertos que queman esta hierba. Yo lo hago solo por deporte, no porque lo fume. mantuve el ph en condiciones estables a como dictan los científicos en este rubro. la próxima😁 semana corto las plantas y las pongo a secar.

Flowers looking great… smell is incredible