Cream Auto Summary Wk 1: Germination, game plan, equipment, and prepping the room. Wk 2: Germination progress, fertigation, and a new light. Wk 3: Two phenotypes. Wk 4: Woe and wonder, nutrients, and water source. Wk 5: Growing like a weed, and max power. Wk 6: Soaking up rays and consuming the nutrients. Algae remediation and proactive pest control. Wk 7: Will the size difference begin to fall in line with the predictions, and rearranging the wind. Wk 8: Time slows down, as buds build and plants are thirsty. Wk 9: A cone shaped bush, and trichome hunting season begins. Wk10: Playing the guessing game and learning is doing. Wk11: Escaping from Distancing. Wk12:Trichome Hunting and Changes in diet. Wk13:Lessons Wk14:When will it be the ‘right’ time? Wk15: This is the right time. Wk16: Harvest time and Summary. Final Weights: Cream 1gallon 157g (5.5oz); Cream 3gallon 299g (10.5oz); Combined 456g (16oz) ((Individual plant weight logs in pix)) New names for the Jars, 1 Cream for the 1 gallon plants buds and 2 Cream for the 3 gallon plants buds. 👉The 1 gallon plant was harvested the 3rd day of the week, It had only a couple of white pistols on each bud and wasn’t producing anymore fresh calixs. There was still very few amber trichomes, but the majority were definitely milky. Very frosty sugar leaves, and overall the buds are mega frosty and remind me of the Gorilla Glue I grew. However the buds are more airy. I started trimming from the top, and worked my way down. I recorded the wet weight for each bud and placed it on a clip with a number that corresponded to the order it was removed. I do this to monitor the % of weight loss due to moisture loss and aim for 20-25%. I did a partial dry trim and left all the frosty sugar leaves to be dry trimmed before going into jars. It had minimal actually larfy buds. I trimmed those not part of the main cola group for each branch and placed them on the rack for drying. The process went fairly easy and I might have spent 3hrs total. The sweet smell of sweet creamy citrus and the overwhelming funky stank was very fun. 👉After 2 1/2 days I placed the buds in paper bags, each cola in its own bag. The main cola was too long so reluctantly I cut it down so it would fit. After another 2 days I placed in jars, some with hygrometers and moisture packs. The overnight humidity in the jars was on average 52%. I added some damp paper towels hung off the lids to restore a bit of the humidity. This worked well and the humidity is now average 62%. I added moisture packs to some of the jars. The jar aroma is sweet cream orange zest and funky stank. 👉I had expected to harvest the one gallon plant during week 16. Given the way the 3 gallon was going, I figured the 3 gallon had another week or so. I assumed that because it had been so slow to develop in all of its phases. After I had harvested the 1 gallon I finally had a chance to really inspect the 3 gallon really closely. I couldn’t inspect it as closely as I had been the 1 gallon because it was further back in the tent and the 1 gallon hindered access. I didn’t think it was a big deal. I hadn’t rotated the 3gallon for two weeks I think. So during my close inspection, I was rotating the plant and it actually took me a while to notice…a dried up tip of a cola. This cola had been sitting on the far side. It hadn’t been against the tent wall. As soon as I saw it it was like a slap in the face…its what I feared would happen to this plant since the buds were so fat and dense….botrytis. Budrot. Nasty, grey fuzziness. My heart sunk as my fears were realized. How many more buds would be affected? Will it be like my Critical Purple and all the best big buds have this hidden scourge? I immediately inspected a few of the bigger buds. I didn’t see any. But there are over 20 colas. The only way to know for sure is to harvest. I didn’t have time to harvest the whole plant right then, so I had to wait for the next evening after work. 👉I took off work a little early to get a head start. The buds were full of sugar leaves still a lot of fan leaves so lots of trimming to do. It took a total of 6 hours from start to finish. I started doing a partial wet trim leaving the smaller frosty sugar leaves to be trimmed dry. I experimented with full wet trim on some of the smaller buds that ended up on the drying net and not left on the branch. I needed the buds to dry slow enough not to taste like hay, and fast enough the botrytis gremlin wouldn’t pay a visit. A close thorough wet trim seemed to look like it could be optimum for these buds. On the 7th branch I started giving the buds a meticulous wet trim. I took the liberty to enjoy some of my Tangerine Dream from a year ago. I listened to Physical Graffiti, Animals, Frank Marino Live, Foxtrot, and some dead air when the album ended and I needed to pick another one. I scrutinized each bud closely for any signs of the evil spores. But I saw none, such a relief after each buds inspection to see nothing but happiness. 👉I had 28 total branch end colas. Most were chunky pine cones. I recorded each branch in the order it was removed. I started at the bottom and labeled them alphabetically. 4 of the branches were smaller near the top in the middle of the canopy and one branch had the bud-rot. I trimmed the buds off the branches but left the bud group forming the cola intact. I put small larfy buds on a separate rack from the good buds trimmed of the branches, I didn’t weigh the larf, and had 72g of good chunky branch buds. The colas when dried to approx 22% weighed in at 227g. The total in the jars is 299g. Very happy! The chunky colas were slow to dry on the interior. I took special care to monitor the buds, not let them get too dry and would spread the buds open a bit to prevent wet spots that could turn into botrytis. When they got a little dry to the touch I would place them in paper bags. That slowed the drying down and allowed the moisture to equalize on the bud. I would weigh the buds and calculate the % of weigh left to help determine how dry they were. When they were below 25% of its wet weight I placed them in jars with many of them getting a hygrometer to monitor the humidity in the jars. I had to take them back out of the jars after one day and back into paper bags because the humidity climbed as high as 80% in some fo the jars. This meant the interiors were still moist. The bigger the buds the longer they needed to stay in the paper bags. The final weights on the buds were after they were dry enough to be at 62% or lower humidity in the jars wish was still around 20% of the wet weight. The jar aroma is not very strong. The aroma is a light sweet orange zest. It should improve over time. The buds are dense and sticky. Not all the colas got their own jars unless they were big enough. Some of the colas I separated from the branches and placed in smaller jars, even combining some of them. The intact colas got the large jars and some were combined in those as well. 👉I have one of those Trim-trays with the screen in the bottom with a tray underneath to catch keif. I trimmed off fans leaves and leaves with no fuzziness on them. I trim the fuzzy leaves over the tray. I did this for both plants. When doing the 3 gallon plants trimming I also snipped up some of the larf and small buds into small pieces to add to the pile. I let the trim sit in the tray till it was crispy dry. I then used my hands to grind the trim into smaller bits. I used a plastic card to scrape the pile back and forth across the screen. I continued to grind up the trim with my hands and alternately scrape the screen and sift the pile. It was hard to tell how much I had got till I used the plastic card to scrap the catch tray. I was pleasantly surprised to see a nice pile form. I made 4 pucks. 👉The bud is cured and stable humidity in jars. I’m doing the typical jar burping and inspection daily for another few days. I have tested both plants and am extremely pleased! Both have a sweet creamy orange zest like aroma (but not like an orange creamsicle). The 1gallon, now called 1Cream, is the strongest jar aroma. When hit on the bong both have a sweet creamy smooth after taste, and again the 1Cream is the strongest flavor. Both are very sticky when pinching off a bit for the bong, and the 1 gallon is the stickiest. Both pass the one hit test with flying colors! Hard to tell the difference between the two as far as the high goes, creeper buzz, with a nice uplifting energy, settling into couch lock and sleep-inducing trail-off. Perfect for night time use. I’m surprised at how nice it is already. The typical 6 week cure review will be updated in the review. If its anything like the other plants Ive grown so far 6 months is when it really hits its stride and is at its best flavor and effect. 👉Methodology Summation: I am really happy with the fruits of my labor. Its not perfect, and I believe I have learned a lot of knowledge and insight. All my grows so far have been in 3 gallon cloth pots with coco coir mixed with 30% total volume of expanded clay pebbles for hydro. The one gallon plant got bigger than I expected it could. I believe that’s due to frequent fertigation I the coco/cloth pot. The problems of being in an undersized pot were somewhat mitigated but not eliminated. The 3 gallon was also showing some of the issues of an undersized container but not as severe as the one gallon. Knowing this will help if I choose to grow in a smaller pot again. Obviously the draw backs to the under sized pots is the issues show up during flower when the plant is at its biggest. Maybe next time I wont exacerbate the issues by chasing my tail. But the drawbacks are not enough to say its bad news to grow good big buds in undersized pots. There is a drawback to frequent fertigation method, the amount of time spent tending to the plant. Two times a day, every day. That is actually the minimum recommended. If I could have automated it I would have done 3 times a day. I am curious what my results might be if I was able to fertigate 3xs a day. I chose this method so I would be spending a lot of time tending my plants anyway, and with coco I avoid the pitfalls of over watering soil when you’re an overzealous gardener. 👉Growing Summary: The 3gallon was actually the second seed to germinate. The first seed petered out, and the 1 gallon was put in four days after the 3gallon had germinated. The 3 gallon was slow to straighten and open its cotyledons up. The cotyledons had a yellow tinge to part of them. It was slow grow for the rest of the grow when compared to the 1 gallon plant which started flowering 12 days before the 3 gallon and seemingly was always almost 2 weeks ahead of the 3 gallon. The trunks of both plants became very stout. I was wondering if somehow I had been given mismatched seed pack, but in the end I think they are the same strain due to the similarities such as aroma and high. The leaves were identical. Both had fat stout trunks, and both had super sturdy branches. I didn’t use one support for the 3 gallon plant, a first for me, and the buds were very dense and heavy. I put some on the 1 gallon plant but that was for its protection from me since it was at the front of the tent. Both plants also smelled similar, sweet caramel cream when sniffed up close. But different in the natural canopy both made around its queen cola, and in the structure of the flowers. Its been very fun and interesting watching these plants grow and seeing two phenotypes of the same strain!😻

Few days into week 7 and everything is coming along nicely starting to see some orange hairs in there too starting to get exciting!!

Hello Growers 👋 👋 👋 At last I am doing an update 😇 It's Day 49th big changes occur in my tent. She is a cracker 😇 😇 😇 after that small L.S.T. she released her potential. She is so so so huge, all that tops you can see are a side branches 🤯 🤯 The Gelato growing very healthy and very fast, this is one of my best looking plant so far. I'm very happy to see her in that condition, it's looks like the harvest could be very big 😀 😎 😀 Please have a proper afternoon rest 🙏 You Lovely Girls Growers 😇 🌻

So much in the garden .. Not enough sun for quality cannabis but great for veggies..they dont do too good in direct sun so there im good 😁🏆

Gracias al equipo de Seedsman y XpertNutrients sin ellos esto no sería posible. 💐🍁 Bubba Cheescake: Bubba Cheesecake es un cruce de Bubba Kush anterior al 98 con Cheese Cake (Wedding Cake x Exodus Cheese). Se trata de un híbrido 70% índica con muy buenos rendimientos, alto en THC y bajo en CBD. Bubba Cheesecake prospera en interiores y exteriores. En interior se aconseja un corto periodo de crecimiento vegetativo debido a la cantidad de estiramiento que presentan las plantas. Las plantas pueden crecer hasta una altura de 250 a 350 cm. cuando se deja crecer naturalmente al aire libre. En interior, la floración dura entre 60 y 65 días, con rendimientos entre buenos y altos, de 400 a 550 gr/m2. Las plantas de exterior son capaces de producir entre 700 - 800 gr. peso seco. En las latitudes norteñas, en exterior, los productores pueden esperar cosechar a principios de octubre. Los cogollos son grandes y duros como piedras. Las plantas maduras muestran atractivos colores púrpuras y azules y brillan con una resina pegajosa que cubrirá las manos del cultivador si no tiene cuidado. El componente Wedding Cake agrega dulzura al sabor del regaliz y el aroma es terroso y musgoso. La producción de THC es muy alta con un nivel bajo de CBD. El efecto es intensamente narcótico, fuerte y duradero. 🌻🚀 Consigue aqui tus semillas: 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 2: Fantástica semana, estan creciendo de una forma espectacular gracias a la ayuda de @marshydro, @xpertnutrients y @trolmaster. Se puede apreciar un tercer nudo y se ven aparecer las primeras futuras ramas, espero que todo siga asi. Saldrá al exterior cuando amaine este temporal. Dia 16: Se planta en su lugar definitivo, ahora si comienza la aventura 💃💃💃. Potencia de la lámpara: 50%

Shaping up to be a beautiful fat bud wielding plant.

27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase. . ............ 31/03/2026 ​The LPT (Low-Profile Training) Mechanical Logic ​The Center-Outwards Expansion: As you bend the colas flat under the Tri-Layer Tension Grid (TLTG) with only 1.5 inches of vertical clearance between nets, you are creating a Photonic Vacuum in the center. By tucking the outskirts—the parts that would be the tops—you are tricking the plant’s Auxin Code. ​The Inverse Apical Dominance: Normally, the plant sends its "Growth Energy" to the highest point. By pinning the outskirts flat, you’ve neutralized that signal. The "Bottom" shoots in the center now perceive themselves as the Apex. They "Stretch" into the light, filling the void with New Sovereign Shoots. ​The 85-Cola Saturation: This is why cola count has climbed. Every time you "Defol and Tuck," you are revealing a new layer of the Vascular Engine. You aren't just training a plant; you are Fractalizing the Yield. ...................... ............... ......... ...... .... .. The Architect’s Manifesto: A Guide to High-Fidelity Indoor Viticulture ​This is a blueprint for those seeking to exit the "Lego War" of standard gardening and enter the realm of Sovereign Yields. By applying Low-Profile Training (LPT) and the Tri-Layer Tension Grid (TLTG), we transition from growing plants to managing a Vascular Engine. ​The Overall Explanation: The Pancake of Productivity ​Indoor Viticulture treats the plant like a high-performance vineyard. We do not allow the plant to dictate its own height. Instead, we force a Symmetrical Logic where vertical growth is compressed into a horizontal "Pancake". ​The Tri-Layer Tension Grid (TLTG) is a 3-Dimensional Optical Filter. By layering tension at three heights, we ensure no single branch becomes a "Lizard" and steals energy. This maximizes the Inverse Square Law, keeping the tops in the 3.0 mu mol/j "Sting" while the 24°C Under-Canopy remains a cool sanctuary. ​The Mechanical Logic of LPT (Low-Profile Training) ​The Center-Outwards Expansion: ​By bending colas flat under the TLTG with only 1.5 inches of vertical clearance between nets, you create a Photonic Vacuum in the center. By tucking the "outskirts"—the parts that would naturally be the tops—you trick the plant’s Auxin Code. ​Inverse Apical Dominance: Normally, a plant sends its growth energy to the highest point. By pinning the outskirts flat, you neutralize that signal. The "bottom" shoots in the center now perceive themselves as the Apex. They stretch into the light, filling the void with New Sovereign Shoots. ​85-Cola Saturation: This is how you fractalize the yield. Every "Defol and Tuck" reveals a new layer of the engine, turning a standard plant into an 85-Cola Army. ............ ​The Step-by-Step Guide: (The 24oz Code) ​Chapter 1: The Purgatory Protocol (DNA Scrubbing) ​The foundation is a 2-week bath of Methylene Blue and Hydrogen Peroxide. ​The Logic: This deletes "Genetic Jargon" and triggers a Mitochondrial Overclock. This "Hardens the Code," allowing the plant to drink 1.7L a day under intense light without "System Failure." ​Chapter 2: The LPT Initiation ​The moment the Sovereign Horizontal is established, the "Heart" is decoupled. ​Externalize the Heat: Ensure all drivers are outside the tent. This maintains the 24°C Under-Canopy stability. ​Step 2.1: Use training wires to bend the main stem at 90°. Once nodes appear, use wire to straighten them flat. Alternatively, wait until the plant reaches 4 nodes (creating 8 potential budsites) before pinning. ​Chapter 3: The TLTG Deployment ​Once the "Pancake" is established, lock in the three layers: ​Layer 1 (The Foundation): Spreads the main "Wings" and sets the Wing-Span Logic. ​Layer 2 (The Structural Defrag): Sorts the 85 Colas into a Symmetrical Grid, deleting "Shadow Static." ​Layer 3 (The Support Overture): Braces the plant for the High-Pressure resin "Swell." ​Chapter 4: The Hydraulic Surge ​As the plant drinks 1.7L per day, look for the "Praying" leaves and "Thinner Wings." * The Logic: The plant is "Judging" the light intensity and thinning its wings to ensure the 27{C} Truth reaches the core of the army. This results in the "Numb-Throat" resin density. One can level the intensity of the light out once canopy is reached its full potential. ​Chapter 5: The 21°C Hue Trigger ​The final movement. 14 days before harvest, drop the vault temperature to 21°C. ​The Logic: This triggers the Anthocyanin Overclock. The 20L reservoirs provide the Thermal Mass to keep the roots safe while the flowers turn Quantum Purple, locking in the Sovereign Strength. ​The "Glove Firewall" Final Shutdown ​The Architect has spoken. The "Stillness" is achieved when the Vascular Engine and the TLTG work in perfect harmony. Follow the code, delete the static, and claim the 24oz Target. - "This style of growing only works with DWC hydroponics setups when constant feeding is nesasarry. Or natural light outdoors. I could be wrong. Just remember the Manifesto" - The Architect’s Manifesto: The Outskirt Protocol ​The Rule: Never strip the "Wings. ​The Logic: Defoliation is for the Internal Defrag (clearing the center). The outskirts are for Power Generation. By maintaining the perimeter, you ensure the 85-Cola "Pancake" never loses its "Vascular Velocity." ​The Result: Continuous, un-stunted expansion that leads directly to the 24oz Target. Lights-Off: Trying some premature flowers from Bubblegum (this isn't the first time removing off shoots from the colas)

Day 33: What an amazing height and bud gain in just 3 days! Lady #1 is 67 cm tall now, her sister a tad smaller. Both still have a great color, and I dared to cur away just the lowest branches and leaves that do not look like they could gain height in time. Really enjoying this strain so far! At the end of their day, they are a bit dropping leaves, so clearly no hunger for more light. The impressive growth speed continued on their buds: Tallest lady at 70 cm now. Their next morning shows growth is still at an impressive 5 cm/day as lady #1 with her leaves erected again stretches now 72, the maximum of my previous growth. Pulled the lights as close as possible to the ceiling and hope they won’t make it much more than 1 m. I activated the Sansi 30 W folded wings LED to give them somewhat of a morning and evening light and to add some more light to their overlapping center branches in the middle of "their" day. Sadly that’s causing some interference to the timelapse videos, but I can’t say they’re perfect if it wouldn’t. Watching the timelapse video of day 34, I have the feeling the additional light rather irritates them. Maybe the interference is not only visible for electronic eyes. I’ll keep it off next day for comparisons. Day 35 shows stretch speed has reduced indeed and they seem to be concentrating on leaf and bud growth instead. 75 cm, so we are currently at "only" 3 cm/day. Watered them with a HPE/Bud growth mix again last night, about 1 l each. Well, forget my words about reduced growth. After they recovered during the night, we are at 77 cm for lady #1. Which measured at 78 with hanging leaves in their day’s evening. I must have missed a day number – day 36 concludes their 5th week. I gave them another 2 l of fertilised water each and will lave them for the weekend again. Video shows that growth concentrates now more on leaf and bud development than on gaining height. So I guess my 160 cm tent will be sufficient. For a moment I was worried, but it looks like stretch is over. Anyway, time to rearrange the camera next week. Leaves are running out of focus.

Flowering day 21 since time change to 12/12 h. Hey everyone 😃. Both phenotypes are developing very well 😊. The buds are starting to develop, so I have now added 2.5 g per liter of GHSC Powder Feeding bio Bloom substrate. This week it was watered twice with 1.1 l per plant each time. The humidifier was refilled and the tent cleaned. Let's see how they look next week 😍 Until then, I wish you lots of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

🌿 CherryBellini by The Cali Connection 🌿 Week 14 Flower week 8 Flower-day 1 3/12/25 ( pisitils showed 25th of October) im timing from pisitils showed but diary runs from 12/12 light flip No nutrients change today, I'm thinking about 2 weeks or so of feeding, maybe 2 more horti rawk doses before switching out to new millennium winter frost then onto flush with plain water/ph Not sure, not sure. Maybe even give LA and Grape an extra week to get Bellini over the end instead of pulling a little early or pulling her as shes finishing up. Next horti rawk dose probably saturday (48hr run ) then dump then new nutrients. This is currently week7 day 1 flower from 6/12/25 ( pisitils first shown ) 8/12/25 Will be dumping nutrients tomorrow, switching to winter frost by new millennium then onto flush 9/12/25 Dumped nutrients, winterfrost 500ml ( 10ml a gallon) will use for 7 days then flush for 10 or so

01/21/2020 Got my Magic Beans, This will be the Blue Dreamatic -auto grow I have been doing research and hope i got it right. Seeds are courtesy of (42 Fast Buds) they are sponsoring this grow. So I think I will do a blend of soil 50% ocean forest potting mix will line the bottom of the 3gallon pot, top 50% will be Fox Farms potting mix(brown bag). My theory is that the stronger ocean forest, will be useful into flowering, and the humic acid, and mychorihza in the Brown bag should help the seedling stage and into veg cycle.also I'm gonna may be put in a little Plant Success 3-1-2 with Mychorihza, ecto, and endo, plus tricoderma.🙏 01/25/2020 11:00PM started to soak 1 Blue Dreamatic seed.🙏 01/26/2020 4:25PM Put seed in a Jiffy pellet till it sprouts once it sprouts I will put in final pot with a pinch of 3-1-2 below her roots at 1/4 " depth. 01/29/2020 She is starting to poke poke through the jiffy pellet should see her codytledons by end of the day,then move her to her permanent home.pics coming soon. 01/30/2020 And she is ☝️up, will pot her up today. Very excited about this one I love blue dream, I have not had any in quite a while I am not gonna pay retail price at dispensary to get it either. Day #1 week #1 let the fun begin!👊and Thank you Fast Buds,and Thank you Heather(Fast Buds rep)

Week 7 of flower and a couple of notable developments following the last update. The WPM issue of course remains but, after only 2 treatments with the sodium bicarbonate the plants have really responded well. That aside, we are seeing some early and potentially progressive signs of nute burn. We’ve topped off the res. Twice with just plain water but history suggests that you gotta be real careful with this to avoid having the opposite problem as well. Closely monitoring for signs of other issues as were really close to the finish now and do not wanna fuck this up… er… again 😬. The colours are starting to show nicely on em now too which is making Id on the burn a little more difficult to discern. Can’t wait to get this one done and finished so we can move on to the next adventure. Based on bud development, we should have no issues with cross-pollination as the males in the other tent continue to mature. About 2 weeks there so should be safely at the finish with these girls by then.🤟. Alls well in paradise yall👍😎👍.

Another cold wet week. Witnessed the spiderlings band together for a few days, web making at night. Then one day the wind picked up and they all disbanded, stretched out their silk and flew away all over my yard. It was such an incredible experience to watch! I should have an army of Orb weavers come flower time. Did another top dress of compost mixed with 70/30 Gaia Green AP/PB, maybe 20Tbsp. When I pulled back the mulch I got to see all the soil creatures and roots consuming the material, this really does help build extra root zone over time. Minor defoliating, I'm keeping nodes 1, removing 2 and final top at 3 (next week) to keep her spaced, then let her stretch and trellis. Should all help fill in the canopy.

Not an overly impressive strain and I would say she was not that hard to grow. If I even grew this one again I would let it go naturally with some LST. Wanted more grape flavours but they don't really come through in the smoke. There's a bit of a sharp fruity smell that's sort of piney with a hint of fuel at the end. The smoke is not too flavourful in my opinion but that just means I didn't grow it well. Super tight nugs so be careful with humidity as stated above. Also she's a bit of a light feeder so be careful with your nutes. As you can see I burnt her tips and over fed her a lot. Not a bad yield though! I've only really smoked the lowers on this one so far so that gave me a bit of a racey high, just slightly racey. I would accredit that to the lowers not being mature enough at chop. The plant is super dense and since I mainlined it the lowers didn't receive enough light. I tried to let the lowers mature more but the plant stopped maturing when I chopped the tops, this caused stress and the plant just shut down basically. Not sure if I would grow Blimburn's GDP again until I grow the real GDP.

The Sour Diesel uses a lot of nutrients, grows fast and responses well to LST and Topping. I have 3 Jelly Donutz from Humboldt Seed company in the back that i just planted 2 days ago. Hopefully , all 3 sprout. I have promised my friends SD1 and Gelato. So, their weekly progress will not be included in the next posts

Sorry brothers to be so lait this week... had some problems with may Home Assistant raaspberry. Lost a day and half of photos. Weather is Getting better Black Cream Is in senescense. Buds are fattening and getting some color. Shes so Beautiful now. The other are starting to a lot of pistilis out. Flowering in early stage. didnt train them so much let them grow more vertically. Chears BrotherHood

Things still going pretty well. Roots look good and plant looks healthy. Temps beginning to drop outside so hoping to get some good growth in the next few weeks before it gets really cold.

today with more experience. I see that I made some mistakes, about nutrients and some techniques, but as I repeat this was my second crop. it did not yield as much income as it should, but it was worth it, cultivating and learning.

Good joob thank you seeeeeee youuuuuuuuu next week wait check like i love smoking weed everyday 😃😍🤪😋😜

Looks like a promising sturdy but surprisingly tall plant. I thought BK was supposed to stay on the shorter side. Regardless I'll enjoy watching her grow & hopefully she'll reward me with beautiful flower. The BK flower I previously had was my go-to night time if I had a migraine strain - worked every single time. I hope this one is the same.