Likes
Comments
Share
Plants look healthy, except for a few older leaves, which appear to have some issues. Added big bud this week, lots of bud sights on each plant.
Likes
10
Share
@mr_smooke
Follow
Here we are on day 28. On day 23 i spoted Spider Mites. Next day i been spray leavs whit neem oil, for now SM are gone i hope they will not come back. She coming along nicely😁🤩🤘✌️
Likes
11
Share
Yeesh, what a ball drop Circuit Breaker kept tripping. Using 3 450w, co2, exhaust fan, 3 fans. I unplugged the Co2 after 3 days of troubleshooting. Vpd got totally screwed, plants didnt get watered and messed up the steer. Irrigation system clogged(probably from stagnating) Reservoir has buildup of organic material. Think it was caused from Kelp, and microbes being added to the tank A bubbler didn’t help, covering it didn’t help. I did not try “hydrogaurd” I will stop adding organic nutes. I am now watering by dubbing a bucket into the tank and gand waterin Also, no more than 1000w of lighting in a room. I prefer to use a full quality setup with less plants. No Co2 is ridiculous. Each test ive done has shown that co2 gets me heavier yields.
Likes
21
Share
********Week 9 Vegetation- Sept 12 to 18, 2020******* This will be the last veg week. Flipped to flower cycle at the end of the week:) These girls are pushing out branch Baby!!!! Getting long and keeping them tied down for now. They want to flower and almost aren’t waiting for the lights to switch😃 LST this week on these girls. Getting them ready to put in a SCROG I think. Pull them down for now to start pulling them wider and make it easier to fill in the canopy’s net. Actually, they were only tied down for this week. At the end of the week I removed the ties. There were 4 feed days this week and Advanced Nutrients Bud Ignitor was introduced this week.......getting ready for flower👍 Switch to Bloom nutes next week. Going to finish these girls with Advance Nutrients line this run. I may have to use a supplemental from Green Planet to get through to harvest. This lines bottles are getting closer to a year and a half old now........use em uip👌😃 Not buying more Bud Factor X for example (still have a couple of syringes worth) but rather will add Terpinator and Rezin instead. Little more detail: Sept 12/20 - CalMag @ 2ml, VeloKelp, Vitrathrive @ 1.5ml, AN Sensi Grow A&B @ 1ml - 610ppm and 5.9pH - Each girl given 2L - Pulled out and cleaned up to get ready for netting - Canopy height fairly even today.....little more time to fill in though. Sept 14/20 - Giving them a hearty feeding today with lots of ml’s to rinse off the roots a little more - Sensi CalMag @ 2ml, B52, Microbial Mass @ 1.5ml, Sensi Grow @ 1ml - 880ppm and 5.4pH - Each girl given 4L and they had a nice amount of runoff - maybe 30% this time. Sept 15/20 - Add some sweetener to feed the microbes today,. - Sensi CalMag @ 2ml, Bud Candy, B52 @ 1.5ml - 625ppm and 5.2pH - 2L each for the girls - Leaf colour is a little light so getting the Magnesium up and Nitrogen......that’s why using the heigh nitrogen Advance Nutrients Cal Mag. - pH is a little low but I am cool with it and working on not letting the pH drift too much yet in their run. - They are ready.........they want to flower😃 Sept 17/20 - Bud Ignitor introduced today as we get ready for Flower phase next week. - Sensi CalMag, Sensi Grow A&B, Bud Ignitor, all @ 1ml/L - 485 ppm and 5.7pH - Each girl given 2L - Swtich the light cycle tonight to 12/12 and get the party started👊👍 That takes us to the end of Veg for these two girls. Cheers Growmies and have a great week🙏
Likes
80
Share
Day 35 flowering: Hi all , I hope we are all healthy , sane , and loved in our worlds. It has been another productive week for the two ladies sat basking in the Viparspectra sunshine. The temps in the UK have been low the last few weeks so they can settle into a less hostile heat zone. They are continuing to use those reds and infrared to their advantage with building some.nice long colas among both plants. The lights penetration is really good so they are having no issues with lower bud growth at all so far. The Northern lights has really begun to cola stack now with approx 8 mains that ade swelling by the day. She looks like she could be a very nice yield based on those alone. Fingers crossed she keeps swelling. Her buds and pistils are crystal white at the moment with no signs of ageing so she is in her freshest state of flowering right now . This is a good sign of a longer possible flowering period than the 8 weeks usual. The Grandaddys mimosa is more advanced on her ripening with quite a few orange pistils ( dying off) being replaced by fresh ,white , vibrant ones ( new pollen catchers). She has a good covering of orange hairs already for her flowering stage and could be a very early 7 week harvest possibly. She is nowhere near as big as the Northern lights and is being elevated to keep her in the canopy but she has approx 10 mains that are looking shaggy and with a high leaf ratio too. She is starting to have a nice fruity tang to her smell now when watered or handled. She could ⁹ me by swelling up huge in the next couple of weeks but I wont be too worried if not. The light is performing really well and has done Viparspectra justice too. I am genuinely shocked at how capable it is for its size. The other strains are doing very well too with the Gorilla cookies looking very bud productive and big. They got an amazing start into flowering from the xs1500 and I wish they were under the new offering from their range but I am hoping to twist their arms into letting me try a couple of xs 4000's from showing how well we can use this light. Lol we can but hope..... Be safe well growmies
Likes
14
Share
10/15 This week saw a few snags. Both gorilla zkittlez girls are showing what looks like a Mg def i.e yellowing between veins and green veins themselves. This isn't the first time they've exhibited these symptoms. Currently the heaviest affected leaves are the lowest fan leaves farthest from the light. Aiming to keep it that way. I think it's pH swinging too low. I need to pay more attention to my feeds but sometimes I don't have the time to pH my water as properly as I should. The reason I say it's that and not a deficiency is because they are also showing signs of over feed (yellow leaf tips) only a one half-strength feed did this. There must be plenty of food left in the pot. I'm thinking the flip is gonna come at the end of the week. I'll clean up some lower foliage tomorrow or Sunday and let them grow the rest of the week. 10 weeks seems like a nice round number to me. More pics coming when I do my defoll. 10/16 added some pics and vids
Likes
9
Share
She's looking very healthy, beautiful color on the leafs, completely stunning after I got rid of the fungus gnats she's growing ultra fast, let's see what happens with this beautiful princess of mine! 😍👀💚
Likes
31
Share
This Spring I was asking @James from RQS, wich recommendations he can give for Good Outdoor Performer in my Country. ( Northern Europe) Because most of the Year i have to Harvest earlier due bad Weatherconditions. Because in 3rd .of September, weather changes, and big Rain begins He recommended me Honey Cream and Speedy Chile So I started Grows with this Strains And its a Superstrain!! for my Conditions, That means they get ready in Time, before everything gets worse Great growing Strain, very big and stable Branches, .........When they started Flowering they go in Overdrive The Result is a wonderful strong Plant, filled on and on with Buds Today we harvested The Lady in the 75l Growpot On Sunday the Lady into the ground, gets Harvested We made some Photoshooting and Videos to show her Beauty, but its nearly impossible To catch her in Pictures but we tried Luckyly ii nvented in a wet trimming machine, and the Lady was cut down in short Time, and gave us a good Number ( i have no cluehow much,,,Iam guessing for 300 g) Sunday October 4th Second Honey Cream was Harvested, She had agood shot Of Purple due Cold nights. She was so fresh , when I took of the Bif Leaves, they made asmacking Sound Plant Number 2 was sitting in The Ground, I started fertilising her late( 2 weeks before Harvest), but not tooo Late She nearly catched up , in Budbuiding her Sister. So Thank you for those Gentics... its for me a "must to grow again Plant" Iam going to write more on Sunday, about buds smell and resinousness
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Likes
9
Share
Week 7 of Flower going well, plants seem to be stressed a little bit though I believe it's either some slight nute burn or a nute lockout caused by overfeeding. Runoff EC coming out about 200 higher than the input also runoff ph is around 5.4-5.5 which to me indicates slight overfeeding. Going to feed one more week every other day with a watering in between each feeding ph'd to 5.7, than I will start my 2 week flush using clearex by botanicare and plain ph'd water. Some nice purples have also started to really come out this week and the trichomes are constantly packing on.
Processing
Likes
11
Share
@Dunk_Junk
Follow
A bit more progress this week.
Likes
25
Share
What a awesome journey !!! I love this strain in every possible way, its so tasty !!! 295g DRY WEIGHT !! thats crazy, love it ! Will be growing more FORBIDDEN RUNTZ without a doubt soon ! Papaya Cookies and Strawberry Gorilla from FASTBUDS will be the next diaries, please follow 😎
Likes
10
Share
Likes
38
Share
Some are swelling , one is smelling very different to the others . I seem to have 6 phenos from small to tall and rounded buds to thin spear shaped buds. I'm not sure which is my favourite yet but one has a very unique smell almost like pineapple and exodus cheese , it could be that one but I also like the bud formation on another,, we will see
Likes
33
Share
I got the 3 starting seeds from an exchange with a redditor who accidentally pollinated his batch with a male, meaning I didn't start with the best genetic which in the end, probably induced the hermie. It turned out good overall but it did fuck up a lot of things. I never thought 4 weeks of veg would be too much. They got tall in no time and almost tripled in height during the flowering stretch. Light burn had a significant impact on the trichome production of certain buds. The mold is on me. I should have controlled the conditions better. I had to throw away 10-15g because of it. And really nothing guarantees I removed it all. Plant B produced, in the books, a lot less than her sisters and that can be explained by 3 factors: -Mold attacked it more than the others; -I probably switched 1 or maybe 5 (who knows...) whole branches when they fell from the rope during the drying; -I left a lot of tiny popcorn buds that got separated in the ''to be extracted'' jar. The 3 plants were pretty similar in looks but gave rather different seeds. A, the hermie, gave a lot of seeds in general but almost half of them were immature or wonky and got discarded; B, a female, gave a lot of good ones but also quite a few bad ones. The have nice stripes giving them a tiger look; C, another female, still hasn't been plucked of all it's seeds but the ones I already collected are really big, round and mat. Plant A pollinated itself. Plant B got helped by me but C didn't received help from me nor the wind and still got hit, a lot less, but still. I'll never underestimate the propagation power of pollen again. FINAL HARVEST: PLANT A: - 91g - 281 viable seeds PLANT B: - 28g - 297 viable seeds PLANT C: - 89g - 149 viable seeds 167 mixed seeds from ABC EXTRACT MATERIAL: - 9g TOTAL: 217g / 894 seeds Height by weeks: 1 - 7 cm 2 - 20 cm 3 - 32 cm 4 - 49 cm Switch 5 - 81 cm 6 - 107 cm 7 - 120 cm 8 - 124 cm 9 - 125 cm 10 - 126 cm 11 - 126 cm 12 - 128 cm 13 - 128 cm Nice experience overall. A lot of thing could have gone better but the fact is I got a bunch of seeds for future pheno hunting and God knows I'll need to do some to straighten the genetic. See you all then!
Likes
4
Share
🌱 Week 3 – Gorilla Cookies Auto Pheno Hunt Another week down and the differences between the phenos are becoming more obvious every day 👀🔥 The environment stayed very stable this week with temperatures, humidity, and VPD remaining consistent. Because all plants are growing under the exact same conditions, it’s really interesting to see how differently each phenotype develops genetically. 📈 Current observations: Several phenos are already reaching close to 30 cm in height Meanwhile, some smaller phenos — especially Pheno #6 — are still around 13 cm Leaf structure and overall plant shape continue to vary a lot between phenos Growth vigor is clearly different from plant to plant now 💧 Feeding & maintenance: This week the plants received their first proper feeding with around 4 liters of nutrient water. Some phenos seem to react more sensitively to the nutrients, as a few plants are starting to show slight brown leaf tips, so I’ll keep a close eye on them over the next days 👀 I also removed more large fan leaves to improve light penetration and allow the lower branches to develop more evenly. 📊 Current environment: Temperature stable around 26°C Humidity staying between 63–65% VPD maintained around 1.3 kPa Light intensity remaining at 35% Now I’m really curious to see when the first flowering signs will appear 🌸🔥 💬 Which pheno would you pick so far?
Likes
69
Share
@nonick123
Follow
Día 66 (05/08) Cerrado por vacaciones Día 67 (06/08) Mi amigo viene a casa a hacer un riego con 1 Litro de H2O pH 6,5 Día 68 (07/08) Cerrado por vacaciones Día 69 (08/08) Vuelta de vacaciones! A ver como están después de 5 días sin verlas... 😱 Riego con 1 litro de H2O pH 6,5 Añado 3 cm de sustrato nuevo porque se ha compactado y se ven las raíces! 😢 Día 70 (09/08) Riego 500 ml H2O pH 6,55 Eliminación de algunas ramas bajas Día 71 (10/08) Riego 500 ml H2O pH 6,55 Sesión de fotos semanal! Día 72 (11/08) Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
10
Share
@Froggman
Follow
Thickening up nicely! Got some nutrient issues on the LSD, but not nearly as bad a previous grows.