Usually I start my diary after they all pop but I’m feeling lucky and especially green this round. After numerous failed attempts at getting auto seeds from various sources and not having them pop no matter what I did. I finally got in touch with THSeeds and told them that the Critical Hog auto they sent me were totally bunk and not one popped. They had Truenorth seedbank send me this bubblegum Within a week of my complaint. I’m hoping these are fresh vigorous seeds and after much touch up learning on seed popping Iv decided to go straight from the water cup to the medium which is Black Gold seedlings mix in the center 6 inches of my coco soil so to give them a easy start with no added nutes. So it begins.... Stay tuned fellow growers!

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

Mr-Jones Shockwave F2 🔹🔹🔹🔹🔹🔹WEEKLY GOALS🔹🔹🔹🔹🔹🔹 🌞Environment - 75/80℉ and 45/50% Humidity 💧 Feeding - Using "Super Coco" amended soil. compost teas, Dechlorinated H20 PH/6.5 Fish Fertilizer, Started feeding the plants because they are only in 1-gallon pots. 🍃Training / towards the end of the week will be Schwazzing the plants, along with cleaning out the bottoms,. 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡Mars Hydro FC 4800 / 480W Led Grow Light - "Instagram: MarsHydro_Aliexpress"💡 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜- Rambling - Just feeding the plants Dechlorinated H20 PH@ 6.2/6,5 - that are still packing on bud weight, this could be the last week as the trichomes are starting to show cloudy, I like about 5/10%, Ambers - Have identified 3 maybe 4 of these girls to re-veg after I transplant into larger pots. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Sunday 01.03.21 / Watering with Dechlorinated H20 PH@ 6.2 ▶️Monday 01.04.21 / Watering with Dechlorinated H20 PH@ 6.2 ▶️Tuesday 01.05.21 / Just Watering with Dechlorinated H20 PH@ 6.2 ▶️Thursday 01.07.21 / Just Watering with Dechlorinated H20 PH@ 6.2 ▶️Friday 01.08.21 / Just Watering with Dechlorinated H20 PH@ 6.2, they are getting very close! ▶️Saturday 01.09.21 / They are looking great will be harvesting tomorrow! 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹

Week 6 going strong - no slowing these plants down. Smell is pretty intense - even with 6 inch fan and carbon filter my entire house smells dank 😎😎😎

First in water, then transfered to a paper towel. 2-3 Days in only two opened up , I dropped all into the soil - eventually the last one also germinated. Eventually, 2 weeks in, they were still not growing much.

Que pasa familia, vamos con la novena semana de floración de estas Zkittelz de Seeds Mafia. La humedad está entorno al 50%, y la temperatura la tengo entre los 22/24 grados. Controlamos en ph en cada riego a 6.2. Y el agua que utilizo de riego suele estar estancada entre 24 / 36 horas, hasta aquí todo bien, tienen un buen color, ya van progresando y madurando a buen ritmo, las flores están repletas de tricomas, vemos cómo acaban las ultimas semanas. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

We entered the 7th week of flowering, we are no longer approaching the cut but it is still growing and producing giant buds, the smell remains strong, sweet, little by little we are approaching its end 🙌👏

What can I say but wow this is the star of my grow room she has it all , stress tested , heat , cold , drought lol just a monster . The team at dinafem have created some thing special here she eats a lot and has the nicest colour around . Can't wait to see her in her flower and how much she can stretch out .. till next time Cana family

Day 9- A little disappointed with the sprouting process but I will move on and try to do my best with what I have! Day 14- Transplant day/ DWC / 5 gallons Low's Bucket/ 10 inches Net Pot / (GENERAL HYDROPONICS WATERFARM FARM KIT WATER RING + Air Stone)

Week 8 - So far I'm very happy that I have grow this strain it's looks amazing and it's easy to grow so far I did not had any issue at all. 9L Pot the buds are getting fat 12L Pot a lots of buds has form everywhere

this auto seems to be chugging right along. Growing nicely. I am not going to do anything to it and we will see what happens. The other auto GC has already gone into flower kinda early. so will need to put another seed of this variety down.

Strain: Black Haze ((Sir Jack x Skunk Auto) F6 x Pakistan Chitral Kush) F5 Breeder : Exotic Seed Autoflower 10 Weeks Week 1 (Day 1-7) Planted seed into 1,5 BioBizz Lightmix/ Plagron Perlit and added a few grams Mycotrex Setup:GrowTent: 100x100 Secret Jardin HS100 Exhaust: PrimaKlima PK125WHSP-EC Filter: PrimaKlima K2601-125 ClipFan1: AC Infinity Cloudray A6 ClipFan2: AC Infinity Cloudray S6 Fertilizer: BioTabs / only Water strategy Soil: Biobizz Lightmix + Plagron Perlit

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....

Had to isolate one of the ladies due to being a week+ behind the other which involve putting in her own resvoir other four are starting flush. Also had to remove and clean the connection "T" as the roots were plugging up the "T" and restricting flow back to the res. The buds look amazing and am really looking forward to the pay off.

Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I'll start flowering tomorrow by switching to 12 / 12 h because the ladies mustn't get too high because the small flowering tent is only 160 cm high :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Looking like i have a magnesium deficiency as show in the leaf pic. I'm Gonna increase the cal-mag. Day 37 : Pots were dry so fed 2.5 liners to the 5 gallon pot and 1.5 liters to the 3 gallon. Upped the cal-mag. Introduced Big Bud & PK Boost

Hi all 🧑‍🌾 Welcome to my 🍌💜👊 week update. Hope everyone keeping well and having a great week😁 Thank you so much for so much support on this bananas ride 🙏💜💚💜💚 Everything still going pretty well. Girls are developing and stretching like crazy. Athena currently Dec 14 90cm and main stem of Xena is not far of this height either. Unfortunately noticed first signs of calcium deficiency(my opinion) on Athena. Thankfully started feeding both girls with calmag weeks back but the dosage wasn't not enough for Athena. Started small treatment very next day on Dec 11 (see description below) I belive got my baby back on right track. Week 9 Dec 11-17 Dec 11 Watering was planned for Tuesday but due to calcium deficiency decided for a little treatment. Watered both girls with mixture of reduced content of growth nutes by 50% calmag at 1.2 ml per ltr. Reduced solution PH to 6.2 as apperently it's ideal for calcium consumption. Over period 4h I have watered Athena with 5ltr with couple runoffs. Xena 3ltr. Total of 7-10 leaves affected mainly at top colas close to the light. Dec 12-13 Purely observation and all looking well. Of course all affected leaves will progres of showing signs but good news is that growth and development booming and don't see any new leaves with symptoms. Very nice trichomes development in recent days and more and more colours. Dec 14 Second watering for this week 6.5l Increased calmag to 1.4ml per ltr and if still things will be looking well reduce to 1 or 1.2 on next feeding. Dec 15 Very nice respond on yesterday feeding. They definitely fatten over night and getting more and more frosty. Will need to remove some foliage soon as getting extremely bushy again. Dec 17 Xenas main stem top cola almost touched the light today. Tied her to left side of the cabinet, applied selective defoliation on both girls, tied few branches to netting and on the end of this busy day a third watering for this week. 7 ltrs beetwen both. Runoffs Xena PH6.4 Athena 6.3. Very nice week have to say. I belive that calcium deficiency on Athena is no longer a case here and both girls developing very nicely. Both are still stretching, buds are gaining in size and both girls started exploding with trichomes, Thank you all again for such amazing support 🙏peace and love brothers and sisters ✌️💚💜💚💜💚 Stay tuned for new week update 😉🧑‍🌾✌️💚