Recommended
Likes
Comments
Share
@Sledge1
Follow
Another steady week, nearly there now. Trichomes are all nearly cloudy, and leaves are starting to yellow.Another week or so and we are good to go. Happy growing!👊
Likes
13
Share
LST proved effective. Looks almost ready to switch to flowering.
Likes
6
Share
The heat is really intense these days as I've noticed her leaves are curling up…she was transferred to the 5-gallon pot 2 days ago.
Likes
12
Share
4 for 4 seed to sprout. They were germinated in a starter mix of coco loco and extreme mykos WP and will be insta-transplanted here in the next couple days. Off to a great start! This cycle is a showdown of 3 different feed routines featuring some tasty genetics from my friends at Tastebudz Genetics and Super Natural Seeds UK. It’s a mixed cycle, 3 autoflowers and 1 photoperiod. Might train or I might let everything grow natural as I try to keep everything on track and recorded lol. Fingers crossed for another great run!
Likes
87
Share
Week 4 - 01/22 to 01/28 2021 Pictures from Days 25 + 26 TRANSPLANTED! Might have waited too long but hopefully the transplant and LST stress might slow the plant down since i think it's already flipping to flower like the other @SweetSeeds Dark Devil Auto and the Purple Lemonade from @FastBuds. I think the Red Poison might have been the first one I noticed to flip but at least this one will be quick. More and more reasons to go back to a photoperiod grow after this for more control/really test out the new lights 🙌 Ended up more 50/50 ratio of Destiny Organic's Dark Matter Living Soil + ProMixHP since I had to make the Destiny last. Apparently they went out of business just after I decided it was my favourite/new soil :( Would rather stay away from Ocean Floor since I haven't had the best experiences with it (bugs/rust fungus etc) Feel free to drop some recommendations other than Fox Farms below 👍 The Red Poison Auto is going strong other wise, keeping the LST basic to see if I can still get the screen in the tent but it wouldn't be practical at this point. I raised the @ViparSpectraLED P1500 another eight inches after transplant and started basic LST. I really wanted to get these four under a ScrOG but if 3/4 are already flipping and the LSD is still runty I might have to wait it out again. Just like the Dark Devil in my other Sweet Seeds diary, there is a solid smell on the fingers after adjusting it/when the fan hit it just right 😍 I have the @MarsHydroLED TSL2000 set up and ready to go once the girls settle into their new pots. Have the new surge protector/heavy duty power cords/power tool grade timers as mentioned in Week 3. Some of it shown in the pictures. Threw some videos in this week as well with some Queen's Radio GaGa, Beastie Boys' Brass Monkey, and a little hint of Arkells ....COME TO LIGHT on the short @ViparSpectraLED ..GET IT.. 😓 I thought the Red Poison had the streaks in the leaves but turns out it was the Purple Lemonade, My Chocolate Mint OG Auto just finished curing so I must have made that update during the test session 😎 Chocolate Mint OG Auto Diary: https://growdiaries.com/diaries/77696-humboldt-seeds-chocolate-mint-og-auto-grow-journal-by-glazedgrow -- Thanks for checking in! Throw down a like and/or follow so I can return the favour 🙌 Check out my Diary of the Year 2020 Entry for my Original Auto Sour Diesel: https://growdiaries.com/diaries/54258-fastbuds-original-auto-sour-diesel-grow-journal-by-glazedgrow IG: @GlazedGrow CannaBuzz: @GlazedGrow
Likes
25
Share
Day 45 17/08/24 Saturday Another watering today using de-chlorinated tap water pH 6 only. Lemon skittles and XXL ammo are tall, bud nice and smelly plants! The Kabul is more of a dense compact build, I'm excited to see what they grow into 😍 Picture and video update ✌️ 💚 Day 48 20/08/24 Tuesday Feed today using de-chlorinated tap water pH 6. With Plagron PK13-14 and power buds. Noticing the stretch stop, and now packing out there bud sites 💪💚 Vid + pic update ✌️💚
Likes
1
Share
@Ninjabuds
Follow
My super boof plant is gonna be a really thick bushy plant. It already I showing signs of large fan leaves and the nodes are already starting to stack on top of each other. I think this will just be a plain Jane green plant in the end but seems like it will stack really well. We will see it’s always a surprise It’s day 41 from seed and all of the plants are really thriving
Likes
7
Share
Day 56 Veg from Seed Crazy what a scrog method could do in just 1 week 🔥 Definitely going to preform this method again in my future grows. Today was the last day of veg I prep my reservoir for flowering stage (nutrients mix with 5Gal spring water) and flip my lights to 12/12 Also collected a few clones from each plant giving me the opportunity for a mother plant or 2 then have a full run in the near future ⛽️
Likes
25
Share
got these clones of wedding cake from a local grow buddy, Thought I had room for them indoors but I was wrong. So outside they go for the year. They really wanted to reach for the sky indoors lets see how they do outdoors!
Likes
45
Share
yesterday did some defoliation ! damn this cinderella jack is some bushy plan! so many leaves and i maybe cut of like 200 leaves from the 4 plant and they still it's looks so bushy. also pinched the tops of all my buds for the Budswelling but i forgot to make a video of it. but i will post the video from my last diary again just to show you what i did with the bud's for this budswelling if you look close to the pictures and zoom in you can see that all my buds have a little brown spot in the middle. that's where i pinched the buds yesterday and is the wound of doing this. but don't be afraid she will recover soon and produce some big fat compact buds with lot's of trichomes ! it worked on my last grow the auto ultimate to get some fat buds so i will be doing this all the time.
Likes
12
Share
💪🏽 No sign of bugs or nothing only problem is she’s a thirsty B
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
2
Share
@Dmntverde
Follow
Cursando el día 18 de vegetación Apliqué organic Grow de B.A.C 1 ml/lt
Likes
57
Share
@Dwillsun1
Follow
This one was fun, as always I learned more than I knew and got more than I expected so thank you Super Sativa Seed Club for the Super beans for Super easy to grow pheno to particulate in the Super contest!!! Thanks to ALL MY groW Fam/Masters/Gurus/Apprentices/Newbies. Let's keep groWing!!
Likes
12
Share
this week you get shit pictures cause never any sun here. plants are doing well, as soon as i flipped the pineapple had white hairs very next day. the shiskaberry still has no white hairs but is stretching and catching up to the pineapple. its only been a week since my mass defoliation and it looks like i didnt even trim anything( will have to re-trim week 3 of flower) i also bought an ac infinity exhaust fan for better circulation,and i will be buying a dehumidifier this week. i might start a scrog today ,its kind of late but if anything it will be support for the buds.
Likes
1
Share
Looking ok stretched alot so had to add some caines to support the buds. Done quite alot of defolatin as ther were just many leaves covering bud sites and only using 1 600w so have spaced closer together for more light. Still feeding them doff tomatoe feed and had no signs stress. Goin to add some pk next feed.Had some fkin heat so plants have alittle heat burn so had to higher light alittle also alittle wind burn Owell updates to follow
Likes
15
Share
@MrGrowMan
Follow
10.01 FLUSH pH problems. Week 10-11 1 nutrient water 1 non nutrient water LsT and Scrog Diesel and Mimosa (front 2) auto 2 break up cake no flowering, i guess my flowers fem and If it continues like this for another 1-2 days, I will switch to 12/12 light period.// day 62 start 12/12 light period day 67 break up cake' s 12/12 start flowering
Likes
14
Share
Orange juice and gym bag funk, way too much flavour to do more than a dab or two a day of this. Nice high, and low 20%'s rosin return.
Likes
9
Share
@Colo420
Follow
Venimos muy bien con todas las plantas a pesar de esta ola de calor que no se quiere ir. Por un lado las fancy están en su etapa de lavado para ser cortadas próximamente. Las colombian Jack vienen flotando muy vigorosamente, y la kritikak k se está bancando el calor del exterior como puede
Likes
18
Share
@Mastr
Follow
She grow super fast and I start nutrient on her day 6 and she loves it Today day 12 I start on her lst training and I will top her too