Likes
Comments
Share
Harvest day 69 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
50
Share
Week 6 Veg Report – Runtz We Meet Again! Another week, another step forward in our Eternity Grow Cup 2025 journey, and oh boy, do we have a lot to unpack! These Runtz girls are showing their potential, and we’re dialing in every little detail to ensure they thrive. Let’s dive deep into everything that happened this week! Cal-Mag Deficiency Adjustment – Pheno #5’s Special Needs This week started with a close inspection of our phenos, and we noticed that Pheno #5 was showing early signs of a calcium/magnesium deficiency. Whether it was slightly off VPD levels or this particular plant being more demanding, we decided to correct it by increasing the dose of RO Water Conditioner. Now, while this isn’t a direct substitute for Cal-Mag, it does contain trace amounts that can help stabilize the situation. 🔬 Understanding Cal-Mag Deficiency: Calcium and magnesium are essential secondary nutrients. Calcium strengthens cell walls, preventing issues like tip burn and weak stems, while magnesium plays a critical role in chlorophyll production, allowing plants to efficiently absorb light energy. 💡 Signs of Deficiency: • Yellowing between veins (Magnesium) • Rust spots on leaves (Calcium) • Slow growth and weak stems ⚡ How We Address It: • Slightly increasing RO Water Conditioner to see if trace minerals help • Keeping an eye on overall nutrient uptake to ensure no lockout • Monitoring VPD (Vapor Pressure Deficit) closely to optimize nutrient absorption Let’s see how she reacts next week! Branching Development – Pheno #2 Leading the Race All five phenos are thriving, but Pheno #2 is showing the most aggressive branching, pushing outward faster than her sisters. However, overall, we’re seeing very uniform growth, which speaks volumes about the stability of these genetics. 🌱 What is Branching & Why It Matters? Branching is the plant’s way of expanding its canopy, increasing surface area for photosynthesis, and maximizing potential bud sites. Well-structured branches allow better airflow, light penetration, and more even growth—key for a successful high-yield harvest. ⚖️ Topping vs. Leaf Bending – The Training Choice Instead of topping, I’ve decided to go with leaf bending for now. This method allows for gentle manipulation of the plant’s growth without causing major stress. Once we introduce the SCROG (Screen of Green) net, this training will help maximize the canopy spread. Moving to the TrolMaster Ecosystem – A Game Changer Big move this week—our Runtz girls officially transitioned into the TrolMaster Ecosystem, and let me tell you, they are absolutely loving it! Under the ThinkGrow Model 1 LEDs, they’re thriving, leaves praying upward, soaking in that optimized spectrum. 💡 ThinkGrow Model 1 LEDs – Why They Work • PPFD of ~400 µmol/m²/s at their level, running only on Channel One • Full-spectrum lighting tailored for optimal vegetative growth • Passive cooling design, keeping temps stable while saving energy Environmental Conditions (Measured on the TrolMaster Tent-X and the AMP-3) • Temp Max: 26.6°C | Min: 16.2°C • RH Max: 77% | Min: 52% • VPD Max: 1.65 kPa | Min: 0.43 kPa • Solution pH: 5.8 • EC: 0.96 • Water Temp: 16.3°C Why These Numbers Matter: • Keeping VPD in check ensures efficient nutrient uptake • pH and EC levels fine-tuned for maximum root absorption • Water temp stable to avoid root shock and slow growth Autopot System Prep – Getting Ready for the Next Phase The week wraps up with us cleaning and preparing the Autopots for their next phase. These self-watering systems will allow the Runtz girls to access water and nutrients at their own pace, optimizing growth as we head into pre-flower soon! A huge THANK YOU to Zamnesia, Plagron, and GrowDiaries for making this incredible Eternity Grow Cup 2025 possible! Also, a big shoutout to my main sponsors, thank you for keeping this journey running: 🔥 Aptus Holland – Precision nutrients for peak plant health ⚡ TrolMaster – Bringing automation and accuracy to the grow 🌱 Pro-Mix – The foundation of strong roots and healthy plants 💨 The CannaKan – Premium solutions for top-tier results Grove Bags – Revolutionizing post-harvest storage & terpene preservation 📜 Ziggi Papers – The ultimate rolling experience And of course, a massive thank you to the community—followers, supporters, lovers, and even the haters. You ALL fuel this journey, and I appreciate every single one of you! 🚀 Good luck to all fellow competitors—watching everyone’s grows is inspiring, and the competition is fierce! 📢 Join the journey on YouTube & Instagram for exclusive content, behind-the-scenes action, and more insights into this epic run! 👊 Let’s keep pushing, learning, and making history—see you all next week for another deep dive into the Runtz We Meet Again grow! 🌿🔥 💚 growers love to all 💚 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags
Likes
7
Share
Flushing for 1 week and harvesting soon, decent bud structure for this strain. Predicting 4oz dry for this harvest we will see. Overall good experience
Likes
5
Share
@most_dope
Follow
Did some lst on one of the taller main colas because I started 2 more and needed the smaller light for them. I turned my 150w Marshydro the way it normally goes so it can cover both plants and tried to get an even top canopy for both plants to get the most out of the lamp. I think the 1 is gorilla zkittlez I was thinking stardawg at first but the leaves are very similar to the gorillaz. I keep worrying about giving higher doses of nutrients because it looks like I burned them a little bit feeding twice in 1 week. It’s hard to tell the difference between defeciency and burn sometimes which is making me want to switch to organic lol. The leafy one is starting to bud finally it seemed like even after pre flower was in full bloom it was still pushing out too many Leaves and almost no trichomes compared to the zkittlez. I’m thinking that one may be an afghan kush or something. It was really woody smelling hazelnut almost and now I’m getting some pine hints now that the buds seem to be getting back on track
Likes
8
Share
@420cfm
Follow
Converted to the sp-250s from some Meizhi blurples. Roughly same wattage at the wall. Let's see how we do! Ladies have been topped with some LST. No scrog this time as I don't have enough space to get in/around the tent...
Likes
11
Share
Its really perking up in flower, and the blueberry smells are ready coming out!
Likes
15
Share
the whole week plant was preparing for the harvest I flushed, I did HST, just thrust in it with a knife (I spied on this method from Zurban_Poisonia, thanks to him for the idea) this should help release the resin. buds looks great! I think that cool for such light (it consumes 93 watts) Harvest will be coming soon
Likes
69
Share
1/24 Seeing balls I think :( - Welp - Confirmed they are balls, #2 has them also, not sure if LST caused to much stress or what. To much pride to just kill them all. I will continue this grow concealed in the 3x3. Honestly thought I was doing everything right. Going to leave them together, I got a auto water system to help keep tent closed more often. Doing this for the experience, will deep clean tent and all equipment after. I guess my goal now is to just finish her up, I'm 4 weeks through, going to try to use this bud for edibles, etc. This is for the people who had a hermie, wanted to continue growing it, but couldn't due to there conditions. Here ya go, this will be a fun run. If this isn't a good idea let me know LOL. 1/25 - (early morning) after a little researching and thinking, I think I'll just kill the hermies out. #2 had the same sacks. Going to keep a close eye on #3,#4, but so far they haven't sexed yet, ended up chopping #1, #2 for the better. Done buying cheap seeds, I have went through recommendations to find the best genetics and a more reputable breeder, very soon will start diary on that which I am very pumped for. With 2 of these out now, Planning on putting another strain in with them. I got a little unmotivated experiencing this, but figured rather fix it now then set my self back another 4 weeks. Hopefully we still have luck with #3, #4 will hope for the best! 1/30 - Since chopping #1, and #2 due to them becoming hermie, I definitely lost some motivation on this run. I still have been watering and adjusting canopy with trellis. They have definitely blown up since 1/25, and are giving me much more motivation moving forward. I gave them recharge today. I have started slight LST again but just bending the top cola so it won't grow higher then other colas. I have started another run with Brother Mendel Genetics, and will be starting another grow diary series on them. Look out for it. I do apologize for the late updates, I hope you enjoy the updated documentation. Closing this week out, Definitely had a roller coaster typa week but things are starting to look up. 👉Check out My Instagram for daily updates @Seed2Weed_YT👈 Will Follow Back, Let's Grow Together 💪
Likes
20
Share
@Dunk_Junk
Follow
18cm vertical growth this week. She's growing well. Not much else to report.
Likes
5
Share
@Ensign420
Follow
Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]
Processing
Likes
10
Share
@Stanp
Follow
The Fruit spirit looks gorgeous. The only thing bothering me is that the leafs are getting packed in one place. Is not growing on hight that much. The Blue Cheese automatic started I believe it’s 3th week and looks good and healthy. The Triple G is still a seedling and it had some problems in the beginning as the seed cover kept staying on it until it went out of the soil, so it was looking like it’s going to die, let’s hope for the best. This week i made the first topping of the Fruit Spirit. Once i get the new stems growing I’m starting the LST. I started taking them out on the sun from time to time.
Likes
18
Share
I'm happy with the harvest but I'll do better next time. This has been a great experience and I can't wait for my next run. 191 grams and I turned most of it into bubble hash. The positive out of it all is I don't have to spend on meds for a little bit. For all my fellow growers that followed thank you for the positive energy and help. The community here is awesome and I'll be back in no time to give it another go. Peace and Happy Growing ✌️
Likes
46
Share
Day 61: For this week I needed to do some adjustments. Because of not having much time for 1.5-2 weeks and the beautifull weather I kind of lacked interest in them. So I didn't notice that the fresh air flow didnt reached a corner with plants, which resulted in them having heat problems and therefore falling behind. You can see this in the last 2 pictures. The buds stretched and didnt swell. It looks small and silly. Lets hope they will get better but I won't expect them to be as nice and thick as the others. Since I grow alot of plants, I do not mind, it doesn't harm me. I lifted a fan up and changed some plants location.
Likes
6
Share
Plants are looks great .. 2 of the plants have huge colas already and getting bigger and fatter everyday.. I'm hoping the other 2 catch up ..lol Been having some issues while mixing my nutrients in my resivor.. Got alot of great info from other growers on GD network and was able to resolve my issues... Turns out the rhino skin was causing all the issues ... Since getting some help I havent had any issue with the nutrients mixture.. I also cut down on how much additives I add each feed.. Also notice my stems are purple... from what I remember they were always purple since I got the clones ... maybe genetics or sulfur deficiency or something ... anyways to far into the week to be worried about that , although this maybe why 2 of the plants have slower bud production..
Likes
15
Share
This grow is pretty much on cruise control now. Just watering when dry, pretty easy stuff. This is personally my favourite part of the grow, new change everyday in the tent is cool to see 1 Cinderella 99 got chopped about a week ago, I’m out of smoke so this had a lot to with cutting it early. It turned out good tho and it feels good to have some stuff curing. Trying the jar and the bag. See witch one works better. The northern lights tent is coming along. These plants were slow starters so they will be a while yet. However they’re definitely going to grow some big ass kolas This might be the last week for 1 of the peyote cookies plants, we will see. How do cause it just looks sooooo tasty. Until next week guys, happy growing
Likes
10
Share
Something wrong happened on the end of last week. I had a little irrigation problem and I did a m mistake with the fan’s position, it was too direct on the roots. I think this could have caused a block to the nutrients transmission. I will give just water with regulator ed enzym+. Let’ a see
Processing
Likes
8
Share
The plants stopped growing in height and are now in FULL FLOWERING mode. Every day more and more flower clusters appear and start to build colas at the sidebranches now. The trichome production is also in full swing, the plants get stickier every day and smell DELICIOUS. The Barbarian (=AK-47 x Barbara Bud) plants have a sweet sandelwood-smell like the AK-47 but also with peach undertones from the Barbara Bud in it. I LOVE THE AROMA!
Likes
13
Share
@GrowGuy97
Follow
Got everything moved around & the new carbon filter, fans & lights so hopefully I got better coverage with less power👍🏼 Topped 1 of the Gelato OGs today was getting way taller than the rest we will see how she bounces back! Everything else seems to be going great! Day 22 topped & trimmed them up a bit Day 23 started LST on a few Day 24 started mainline on one of the GZ Day 25 trimmed them a little more today