I'm running out of space and height. The video gives you an idea of how crammed the wee grow room has become. The Rhino filter is working well. The Northern lights that I dropped the lights onto, was a fine specimen before the accident. I'm hoping that colloidal silver will produce anthers allowing the collection of pollen. I can then cross that with a few select flowers so I have seed for next year.

Welcome to the Week 10 update for the Sweet Seeds Gorilla Girl XL Auto’s. Not much to report as this grow is on cruise control until harvest. I will be finishing up with the bloom fertilizer and starting to flush as these lovely ladies finish out Week 10 and move into Week 11. Defoliating as necessary and consistently checking trichomes as I’ve already spotted the first few ambers in and among the already cloudy trichs! Thanks for stopping by and checking out my grow! 😎

Another week done. She's pretty much on autopilot. Still got quite a few weeks left though, must be very Sativa dominant 💪

I just took down the rest of the Grape Deebo harvested last week, this is the red Deebo with green stems. The other one looks like it might have another week. I have taken off one stem as a control So enjoy some bud pr0n.

Deep fried Runts remix is growing a little slow but nothing to complain about I did three Plants of the strain doing a little hunting try to find that good stuffI’m sure the will be great but so far so good with the growing a deep fried runts remix number three is not doing well But has stopped growing altogether not sure what the Hells going on with that but number one and number two are doing well Growth has picked up I’m very excited about this strain this year number 3 pheno did not make the cut so I pulled it pheno 1 and 2 are growing well

1st of December harvest 10 Days dry time 31 days in curing phase (as im writing this) Dry time was 9-10 days (Depending on the size of the buds) Humidity 51% RH Temperature 15C https://www.youtube.com/watch?v=JBNeJTwUOFY&ab_channel=MedicinalGenomics (Found a lot of good science to back up a dry and cure method) Curing is still an ongoing process and the bud gets better with time. But as in now, 31 days later in cure, the buds taste fantastic, smell amazing and the smoke feels smooth. I am still amazed how the ladies bounced back after a chaotic 2-3 first week of veg. Big thanks to everyone who have been supporting, a very good learning experience. THC 22%

Ending week 1 today! I am satisfied with how the girls are growing. Quick summary by days: note: amount of water is on ALL plants, not just 1 13/9 6.5 PH Water Misting (0,2L) 14/9 6.5 PH Water Misting (0,2L) 15/9 6.5 PH Water Misting (0,3L) 16/9 Since I didn't water my soil when I was planting the seeds, I grabbed some more soil, put it on top just to help with stretching, and then I decided to do a full watering just to get the soil wet. I grabbed my pressure pump, put in 1,5L of 6.5PH water, voodoo juice + piranha 2ml/L and watered all 9 of them with 1.5L (misting with the pressure pump - I think I will continue to do the waterings like this because it's so easy!) 17/9 6.5 PH Water Misting (0,2L) I've seen a fungus gnat, so I put up more yellow sticky traps. 18/9 6.5 PH Water Misting (0,2L) 19/9 6.5 PH Water Misting (0,2L) Caught 4 fungus gnats for now, I hope the bastards didn't lay their eggs. Keeping the vents on. Temperature this weeks was 24-27, moisture 50-70, average 60. Mimosa #2 a bit yellowish, keeping an eye on her, hope it's nothing serious. Everything else is fine, going into week 2! I still won't give them any NPK, just voodoo + piranha + b52 in week 2. Maybe i put carboload or bud candy just to feed the bacteria and the fungus in piranha and voodoo juice, any thoughts on that? I think I will introduce Micro+Grow+Bloom 0,5ml/L in the third week. Also, there are some white spots on the leaves. I think it could be chlorine? Im watering with tap water, letting it sit for around 12 hours before adjusting PH and watering. Maybe I will let it sit for more this week. See ya in 7 days, if there aren't any more problems meantime haha

Hey guys :-) The ladies are developing really well 😊. I'll decide spontaneously whether I'll do topping again because I hardly have any space in the flower tent and I'll soon have to set it to 12 / 12 h due to time constraints :-( . But this week they will definitely get the veggie phase. Was poured 2 times with 1 l each (groundwater see description at the bottom) Everything was made clean. Fresh osmosis water is applied and the plants are sprayed and checked. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://shop.greenhousefeeding.com/us/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/choco-cheesecake/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Wonderful aroma in the tent. I do a little stress due to low temperatures at night. I took a small sample :D, everything is as it should.The trichomes are just milky, what will be scary at the finish line...

Harvested Girl Scout cookies auto from Fast Buds! Very satisfied with result: 200gr. dry buds!. Thank You Fast Buds for consistently such a strong genetics!

Another Week

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Beautiful Girl, Has the smell of Pine and Green gummy bears this week. dropping nuits down on all plants to get ready for flush.

Made up a tea mixture of some locally sourced worm castings with Dr Earth Bud an Bloom booster, an about 2ml of Cal mag. Let that aerate for about 24 hours. Then cut the mix to a 1:1 ratio. I know thats pretty hot but wanted to see what I could start to push. Have a little rusty looking spot on 1 of the plants. Not sure what it is, i'll post some pics an keep you posted. That was week 2 I got fucked up on my photos. These included are weeks 3 an starting 4. Had some weird orange spots on 1 of the 4. Needed up clipping off in defoliation. Did some LST with some old ass plant tape. Hit it with about a 1/4 cup of marine cuisine added to my earthworm casting tea. Fed them on 8-18 watered them about a liter each 8-20. Brewing some more Dr Earth Bud & Bloom, worm castings, an molasses with rain water

Overall, the garden is doing great. Had a scare with the WW with letting it dry out a little but it looks like its going to be fine. The pistils are starting to change color and leaves are starting to lose color but the buds are fattening up. I can't wait to see how they all turn out.

Week 1 pretty regular giving Co2 early. Yeast method through seedling stage now with a diffuser. First cut of manifold was made 3 healthy looking plants.

11 Noviembre: Primer riego con 2.5EC y 5.9pH, runoff de 2.9EC y 6.2pH, en una semana más ya deberían estar recibiendo 3.0EC y seguir con esa concentración por todo el cultivo. Alturas están entre 15cm y 20cm. 13 Noviembre: Riego 2.5EC y 5.9pH, runoff de 3.3EC y 6.2pH. Hoy se removieron los primeros nodos de cada planta y se les hizo poda apical. 14 Noviembre: Riego 2.5EC y 5.9pH, runoff de 3.3EC y 6.2pH en la mañana. En la tarde se realizó transplante a maceteros definitivos de 5 litros con 4 litros de sustrato aprox. el cual fue pre cargado hasta la capacidad de campo, con 3.0EC y 5.8pH, desde este punto se debe esperar un par de días hasta que el dryback(secado) del sustrato sea de un 35-40%, lo cual vendría siendo el primer P3 del cultivo, una vez se alcance ese porcentaje de secado, se comenzará con los primeros riegos de precisión llamados P1.

Flowering day 15 since time change to 12 / 12 h Hey guys :-) This week the ladies developed beautifully 👍. The stretch has started very strongly :-) . Watering was done twice this week with 1.2 l (see table above for nutrients). The heating mat does exactly what it is supposed to do, you can see that the ladies are doing perfectly again 😃. Fresh osmosis water was mixed with tap water in a 100 liter tank so that I would have enough stale water for the coming week 👍. Otherwise everything was cleaned and checked. During the check, I noticed that after spraying neem oil 3 times, there were still a few damn trips to see. I have ordered nematodes for leaf and substrate against tripse. Then they should finally be gone again 🙏🏻 have fun and stay healthy 💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://gardenofgreenseedbank.com/candyland/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany