Likes
2
Share
Update of the garden
Likes
6
Share
Likes
4
Share
Mikromachine Auto Brand Kannabia Genetics Northern Lights x (AK-47 x Critical) x Ruderalis Flowering Type Autoflowering Flowering Time 10-11 weeks from seed to harvest THC 15% CBD Low Height (Indoor) 60-70cm Height (Outdoor) 85-150cm Yield (Indoor) Up to 600 gr/m² Yield (outdoor)Up to 600 gr/m² Sex Feminized 📆 23.04-25 (Day 1 ) 💬 just borned 💦 6.5 🍼 0.5L 📏 0.5cm 🌡️ 25c° 📆 24.04-25 (Day 2 ) 💬 👽 💦 6.5 🍼 0L 📏 1cm 🌡️ 25c° 📆 25.04-25 (Day 3 ) 💬 👽 💦 6.5 🍼 0.5L 📏 1cm 🌡️ 25c° 📆 26.04-25 (Day 4 ) 💬 👽 💦 6.5 🍼 0L 📏 1.5cm 🌡️ 25c° 📆 27.04-25 (Day 5 ) 💬 👽 💦 6.5 🍼 0.5L 📏 2cm 🌡️ 25c° 📆 28.04-25 (Day 6 ) 💬 👽 💦 6.5 🍼 0L 📏 2.5cm 🌡️ 25c° 📆 29.04-25 (Day 7 ) 💬 end of firstweek... Amazing💪👽 💦 6.5 🍼 0.5L 📏 3cm 🌡️ 25c° Equipment: Unbeliveble Masterseeds 100W (veg-bloom) Masterseeds growbox 0.25x0.25 Plagron (Veg & Flower)
Likes
4
Share
@DrStrains
Follow
Hello again, Week 14 update is here and we are still packing weight not with the same speed cause i stoped feeding at the start of the week but its going awesome almost no clear heads all trichomes are milky/white. No red head yet so i decided to try and close the lights for couple of hours and then start again for the final week.im thinking from everything that i have read this far ill plain feed water 10 day and 2 days without water and last 2 days without lights that will give me 14 flush days and hoping for the best. As you can see on the pics i had to turn the lamp to the side and put another one on the opposite end to see if i can push some more weight in there the last 4 weeks so now im actually using 600 hps and 250 hps with reflectors inside a 5x5 tent. Any advice welcome ty all . 😏
Likes
26
Share
Day 36: "Hey everyone! Just a quick update: I removed a few more leaves here and there and did one last round of LST (low stress training). 🌿 The plants are looking great, and I'm going to let them recover now before sending them into the flowering stage. I'm really excited to see them start blooming in 2-3 weeks! Also, a quick update on our temperature issue: today, the temperature stayed below 26.8°C, which is great news! However, we still need to find a solution to keep the humidity levels up. Our 360 m³/h exhaust system isn't able to maintain the required humidity level. I've calculated that we need a humidifier that can evaporate 1800ml/h to maintain 60-70% humidity, which would help manage the temperature better. Does anyone have tips for a good humidifier or other methods to control the humidity and temperature? Any advice would be greatly appreciated! Day 37: Hey everyone! Tomorrow, we're planning to buy some Cal-Mag because we suspect the yellowing leaves might be due to a calcium-magnesium deficiency. We're also going to get a pH test kit to make sure everything is balanced properly. Do you think this is a good idea? Any tips or suggestions would be greatly appreciated! Day 38: Hey everyone! Quick update: it turns out the yellowing leaves were due to a nitrogen deficiency. We increased the fertilizer dosage today, so the plants should start looking better in 4 to 5 days. 🌿 Thanks for all the support and suggestions Day 39: Hey everyone! Another quick update: after increasing the fertilizer yesterday to address the nitrogen deficiency, it should take about 4 to 5 days for the yellow leaves to turn green again. 🌿 We're already seeing improvements! The plants have grown significantly and are developing a dense canopy once more. It's great to see them bouncing back so quickly! Day 41: "Hey everyone! Quick update: we've removed the bands we were using for LST (low stress training) and are now letting the plants grow freely. 🌿 We plan to keep them in the vegetative phase for about one more week before transitioning them to the flowering phase. Excited to see how they continue to develop!"
Likes
44
Share
@Roberts
Follow
FBT2402 had a ph issue, and I got some spots on the leaves. I did not have her solution strong enough, and it jumped up on me. It's fixed now, and stable. Beside that she is starting to stack her colas. Hopefully I get a few ounces from her. Thank you Medic Grow, Fast Buds, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
Comments
Share
Week 6 (9.8.25--9.15.25) took photos on 9.14.25
Likes
22
Share
The yellow lid make for some really bad pictures. Playing around with things, as usual I gave in and added a filter pump to my reservoir as the water temp can peak near 23c during the day. I dont have my ambient chiller inline this time. The filter also oxygenates the water so this wouldnt be a pure fog run, oh well. Half fog, half dwc🤷‍♂️
Likes
27
Share
@BudXs
Follow
Final painting and floor trim completed. Walls are white and bright. I started to construct the main flood table. It is made of 2x3's and a sheet of chipboard. I fastened some rails at the perimeters and used caulking to seal all gaps. I will coat the face of the chipboard with a polyurea flat roof coating to make it completely watertight. I have 1/4 : 12 slope on it right now so that it drains to the reservoir end. I stained the sides of the table grey to match the floor trim because ambiance matters Shelves are up to hold my nutes/test pens/genetics/nug/papers/etc... I brought in one of the 3 HLG 550 clone qb's to test for light as I have never seen them in action. WOW!! Having one running is quite intense, I cant wait to see what all 3 going over the 4x10 area will look like (with shades on of course) A minor adjustment is needed to the height of the A/C exhaust vent. It is currently too high by 2" and needs to be lowered. Kind of a pain in the ass, but needs to be done for the table to fit snug. Previous total spend $2430 This weeks spend = $50 (hardware) $165 - killer deal on ebay for 8 inch fan/filter/ducting. open box, new
Likes
1
Share
Sufrió stress por sofocacion a caus de rotura de cooler. Se corrigió indoor intracción y extraccion... Solucionado en el día Ventilando la maceta
Likes
13
Share
@rhajaed
Follow
Apart from the blistering heat and 44km/h winds daily id say she's comin along nicely.loving the high ppms and sunlight however the sun has been very hot these past few weeks of summer so there are signs of heat stress as well.
Processing
Likes
17
Share
Well we are on to week 7, and what a start. I have nicknamed the first one Hulk. It will not stop growing. I defoliate at the end of every week now. I looks like a giant pile of fan leaves when I'm done, but the plants still look full and lush. I was hoping to see some actual flowers by now but nothing as of yet. Maybe by the end of this week they will start to poke out. I did not anticipate such a stretch. This is my first time using this system and it seems to be working rather while. I am trying to go without changing the water now. I want to keep them at this ec for a few weeks so I have been topping up with nutrient water and so far they seem to like it. As long as they stay green and the water stays clear I will continue like this. They are drinking about 2 gallons a day now and eating just as fast. Growing is a true art and I find myself really starting to enjoy the training. I want to make it bigger and better. Already making plans for the next grow. Well I posted up some cool videos and pictures, at least I thought they were, so let me know what you all think. Everyone is so quiet here. Well I will update later on. Keep it growing ya'll.
Likes
16
Share
27.11 Bud swell a little bit delayed because of the lower temperatures overall this time of year. It is around 21-22 degrees inside the tent in comparison to 26 in the summer. I hope they will be done by Christmas. I ve had a little problem at my spot and have to clear everything out for a few days. Bummer. Plants are on vegetative irrigation schedule. 6, 150 ml shots followed by 3 replenishment shots. About 10-15 % runoff.
Processing
Likes
7
Share
Day 132 - 22.09.2020 - Pic updates. Now that my other plant got the boot, this lady has more space. I put up the trellis net to move the branches slightly and get better light penetration. Day 134 - 24.09.2020 - Pic updates. Her lower leaves are starting to yellow which is concerning. I am keeping an eye on her. Day 138 - 28.09.2020 - Pic updates. So definitely concerned. I went out and got the items I needed to start brewing a compost tea as she was yellowing more and looking a bit sad. Even though all my nutes have been given and the PH is right, I do not know why she is having these issues, but I am hoping a nice compost tea will get her back. Other than that she needs to put on more weight. But of the little buds that are there, they are dense as can be. So I am happy with what I see quality wise so far. I will be checking her in more detail later to see what the trichomes are doing, but when I checked quickly we were still very clear.
Likes
20
Share
@ukterpdoc
Follow
Been going so well plants looking amazing they're going to find bigger pots by next weeks update and be in the veg room under there new lights and out of the tent lots more space and lots more light
Likes
3
Share
@LAShugars
Follow
She’s looking happy Small for her age Let’s see what happens 😊 Happy Halloweed
Likes
43
Share
@Lukush
Follow
Hey growmies its flushing time for mi watermelon 🍉 🍉!! Her smell is vary fruity and sweet, can't wait to smoke this one !! WhiteWidow also is in flushing time ! All the girls are looking good 👍💪❤️ I just installed mi new Sp 6500 👍💪👍💪 we gonna finish them up whit some good extra wats ! Check out this led on the website💪👍 https://marshydro.eu/products/mars-hydro-sp-6500-led-grow-light/ SP6500, as one of the huge single bar LED grow lights, installed with top quality Samsung LM301B diodes, designed with enhanced red in broad-spectrum light, emits the highest central PPF and has the superb penetration that its major applications are for high-wire plants and greenhouses. Wattage – 650w Veg Coverage – 4×5 ft Flower Coverage – 3×5 ft Featuring a thick aluminium passive heat sink and densely arranged chips, the SP Series provides high efficacy but low heat output while minimizing obstruction to natural LIGHT!