Note : + jegliches Zubehör wird in der GermniationsWoche aufgelistet . Zeitraffer Videos folgen immer nachträglich. + videos werden so geschnitten das nur ein geschlossenes Zelt erscheint , ergo Fehlen paar reale Minuten (ca 1 Std) . Sanlight Tageslichtzyklus in Lebenswoche 6 : + 200PPFD - 1h - 750PPFD - 16h - 750PPFD - 1h - 200PPFD = DLI 46.60 + + Formel : DLI = PPFD * h * 0.0036 + + in LebensWoche 6 ist der Max-DLI ohne CO² : 45.0 Dazu kann man sich gerne die Zeitraffer angucken . Die Pflänzchen brauchen schon Ihre Zeit auf touren zu kommen . Ergo ist Sonnenaufgang und Untergang reines Stromsparen . Day 36: + 2Liter Flaschenwasser + + Dünger für Büte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + Final : PH 6.2 Nach dem die Mangelerscheinungen wie gewünscht aufgetreten sind, gehts jetzt mit Blütedünger weiter . Sie hat sich prächtig in die neue Umgebung eingelebt. Wetter werte sind hier Super , also ist auch im Zelt super Stimmung :)) Videos folgen in den Tagen . Day 37: Sie wächst gerade noch paar Zentimeter :)) Blühten werden mehr . Day 38 : Und wieder das Licht etwas höher händen , den Sie wächst noch immer !!! Day 39 : + 2Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Greenhouse Feeding BioEnhancer als PH+ + Final : PH 5.5 (das Urgesteinsmehl zieht das sowieso auf mindestens PH 6.5) + etwas Entlaubung der defiziet Blätter. Day 40: Day 41: + 2Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Greenhouse Feeding BioEnhancer als PH+ + Final : PH 5.5 (das Urgesteinsmehl zieht das sowieso auf mindestens PH 6.5) Day 42: + 2Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Greenhouse Feeding BioEnhancer als PH+ + Final : PH 5.6 , Drain PH 6.89

Day 69 (March 6th) Just gave everyone their last watering. I’m going to harvest and wash everything tomorrow night on day 70. I‘m not going to do that whole 48 hours of darkness thing because I didn’t see a difference last time I did it. In fact, it made my plant under watered before drying which caused it to dry too fast. Slurricane and cheese will be washed with h2o2 and the rest will just be rinsed off in warm RO water and hung up. Before and after washing I’m going to go over each branch with a flashlight and make sure there is no dog hair or debris in or on the buds. I will be drying in my spare bathroom (that no one uses!) from hangers. Aiming to keep it around 60-62F and 50-60 RH. Hoping for that 10-12 day dry. I wanted to do a full plant hang but the tent got pretty dirty and I would feel more comfortable just cutting and rinsing everything off branch by branch. I’m going to try my best to keep the full plant intact. Got my humidifier hooked up and running RO water because with tap water it deposits calcium and lime all over the buds and walls. For air flow I’m just indirectly running a small usb fan. I’m not worried about air flow in the bathroom honestly. It stays nice and breezy down there anyway. Got the food grade peroxide and RO water to wash up the slurricane and cheese. Everything except for the cheese and garlic#1 is looking more than done. Trichomes all look pretty well done. Some of them have even burst open. Smells are all super ripe and mature too. Can’t wait to smell each individually in jars. Next week I will recap what went wrong and what I will do differently next time to keep it from happening again. (Day 70F) Just got everything chopped, washed and hanging. The vast majority of the PM was washed out but I can still see very small amounts. When they dry out I can shake the branches a bit to get the rest off. At very least it’s sterile now. There is no question I lost some potency while washing but the amount is negligible for a much cleaner product. I could see lots of dirt and other debris float to the surface of the water after being washed. And no those are not trichomes, those sink to the bottom. I could put that nasty water through a bubble bag and wouldn’t get all that much. Although it probably does remove a lot of the actual trichomes heads. I’ll have to check with the microscope. Everything is rigged up for a nice slow dry. Temp is sitting at 64 and RH is at a nice 60%.

The seed drowned in glass of watter, planted in a prepared pot Initially spilled 6 liters of osmos, up to 80 ppm drainage Then compressed 448 ppm canna aqua +Ca +Rizatonic Landed a little way back from the cent of the pot, by analogy with the previous grove, to the place where he moved on the 16th day. First training: realizing where the first two points of growth will appear, corrected the stem With the door closed, the illumination is about 50,000 lux, at the same time only ceiling lighting of 100 volts is involved: 39 red (700 mA), 26 blue (248 mA), 35 white (82.6 ma) The plant is rotated 90 degrees relative to the shoot, and is ready for training, the luminaire produces slightly warm air, ventilation is at minimum values, while due to the air flow washer machine, the temperature in the box is 2 degrees less than room

The moment before chop she is already 70D into flower, pistil still show but the trich looking real good rignt now, 90% cloudy 10% amber Using the clean fruit solution for this week make it even cleaner <3

26.12.24: These are my 2 best plants P1 and P2 Purple Punch, they are looking great! Not sure what happened to P3. They are in early flower/ pre-flower with the pistils clearly seen on P2. I am also hoping to tie some of the branches down to help light penetration on the lower canopies. I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️

Hey everyone 😃. This week she has done great 👍. It was done again on all the drifted topping and sprayed one last time with neem oil so that the last trips are finally gone 😁. We haven't had any pests for so many years and all of a sudden we have such little shit parts 😅. This week it was poured twice with 1.2 l of water. GHSC enhancer was added during a pouring (1 g per l) The tent was cleaned every day this week and the plants were checked for health. The humidifier is filled once a day. Next week I will decide how I will continue the training because I have space again in the flower tent 😀. This week I'll decide whether it goes straight into the flower tent or is pruned again. Until then, I wish you and your families a good start into the new year 2021 🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8

Looks like a sunny week this week, have taken the lowest branches off the ones that appeared at the first node. Rearranged greenhouse so plant gets direct sunlight’s from 8:30-18:30 each day

Cream Mandarine Auto de chez Sweet seeds est une plante qui robuste et trapue qui donne de beau bourgeons a teinte violet. Je recommande cette variété tant par sa rapidité que par son rendement. Niveau saveur, le phénotype que j'ai cultivé tire sur des notes acide, un goût rappelant l'agrume pour finir sur un fond sucré citrique.. pas mauvais du tout !! L'effet est typique indica et se ressent quand meme bien, relaxant et sédatif. 08/10 pour cette strain ! Bravo à Sweet seeds

Ak 01, the largest from the start, shows a loss of apical dominance, naturally pruned in a Y shape. A leaf has sprouted instead of a top. This is the first time I've ever seen this. I'll see how it turns out. Showed pistils today at 16 days old. Ak 02 showed pistils at 15 days old; my record until then was 17 days old. I'm scared of that speed.

Hi everyone I chop her down day 86 and let her dry in 19° temp and RH 65 % I'm going to slow drying for best results 7 to 8 days She is very dense and sticky bud and so heavy too I think she yield over 150g plus but the bud are not 100% purple its mix with light purple and green ass you can see in pic or video but still I'm very very happy and already germinate another purple lemonade 💜 next week I will update smoke reviews and final dry weight 😀

17/09 - PH dropped overnight. Bumped back up to 5.8. EC 1.2, water level dropping. Might top off with higher nute dose tomorrow. D10 since pistills. Dehumidifer should be arriving early next week. 18/09 - PH dropped slightly overnight, EC considerably. Topped off with nute water at standard ratio but with added 3ml of calmag. PH now around 6, EC 1.2ish. 19/09 - PH stable at 6.0. EC 1.17, water level dropping. Was worried about last night, but she perked back up again this morning. Defoliated 15 leaves or so and noticed a branch with a wilting top. Going to keep an eye, but dont really want to chop at this stage unless absolutely neccessary. 20/09 - PH dropped to 5.9, EC to 1.07 morning, 5.8, .97 evening. Water level continues to drop. Leaves on problematic branch further wilted, but branch is strong. Chopped wilting leaves to see what happens. Defoliated 20 or so problematic leaves. Trying to gradually open her up a bit but avoiding stems so she doesnt get a nasty shock once the stretch finishes. 21/09 - Res top up at standard ratio with 3ml calmag. Roughly 10l drank over 3 days. PH now around 6, EC 1.1ish. Dehumidifer now running outside the tent, but humidity is still around 70%. Contuning to defoliate around 15 leaves a day where theyre clumping / blocking sites.

Week 2 begins for Green Crack and LSD. Both ladies are looking happy and I increased their feed by 1 liter each. Thanks for stopping by growfessors 👽 tune in next week for another episode of growfessor theatre.

Doing a good bit of defoliation this week. Really want undergrowth to start thriving. Using stem clips to space everything out. Day. 24 used tap water with ph of about 7.5. Soil ph down so using higher ph water with out ph balancing

That's it ! Plant #1 :45.52 G Plant #2 : 32.68 G Plant #3 : 43.12 G Sample before harvest : 4.16 G Total 125,48 G I'm happy with the quantity, i know it's not a lot for 250W, but with my setup, and my knowledge, i'm pretty happy with that, i am especially happy cause of the quality, it's dope ! the plant #2 gave me a bad yield. Buds was a but aery, not compact like the 2 others. I don't think it's a genetic problem, i've made mistake on her, and she was the one with the less light, a bit late since the beginning, etc etc.. but she is good ! she is like the #3 but not compact. For the cut i removed big leaves and big sugar leaves, and head down. It was ready to cure after 8 days, i'd like it to be slower but they are already wonderfull after almost 1 week into curing, so it's great 😎 I'm pretty lucky to have 2 realy differents phenotypes, this is so good ! Pheno #1 is realy like a concentrate of lemon, and realy sweet, sugary. She is strong ! Like a 50% High / Stone, totaly stunted. Pheno #2 smells like strawberry, like a strawberry yogurt. She taste more like sugary / fruits and earthy. She is my favorite, best looking, best smoking, best smell, best everything ! This is a plant to try, for sure ! Thanks to anyone who helped me ! Gonna enjoy now 😎0000

Buenos días familia, hoy traemos la 3 semana de floración de nuestras crazy cookies, zambezaseeds. Es una cepa bastante vigorosa con un tallo robusto 6mm, exactamente a mitad altura. Su cultivo es fácil, apenas se ve bloqueo alguno, traga muy bien en lo que se refiere a nutrientes. Ph en 6,5 y humedad por debajo de los 45 % . 48h entre riego y riego, no olvidemos que están en tiestos de 7L. Su floración está siendo bastante rápida estas semanas se verá como engordan nuestras flores, sin duda este es el momento para meter caña a big bud y bud candy.

05.09.2022 🌱 75 giorni dal seme 🌻 5 giorni fioritura 💧 1.5 l/48 h ph 5.8 ec 1.35

No problems this week. Buds are now getting fatter, there is no purple colours at all. The smell is getting stronger and she is still taking full feeds. A very stocky plant.

Missed a few weeks due to I.T. issues. These girls are going great filling out really well, getting some big buds smell sweet/fruity 2phenos are really frosty all are very sticky in week 6 of flower.

Week 5 and this week we are in flowering. More like a pre-flower. Got my filter and fan hook up as smells are starting to get stronger. Still running nuts at 100%. Did a big defoliation and install a trellis net.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.