The Grow Awards 2026 🏆
Likes
Comments
Share
Likes
17
Share
@notkumar
Follow
Day 79 Buds are super dense and are getting really frosty now. Day 80 Looking under a jewelers loupe the trichomes are mostly cloudy and at least half of the pistils are brown. Hopefully this is ready to chop in about a week? Day 83 Watered with a little more than a gallon of distilled water.
Likes
13
Share
@TheeLemon
Follow
Getting to be a real jungle in there. I did some more defoliation to get better light penetration, but only on the fan leaves. They're growing so fast you'd think I hadn't defoliated atall within a couple of days.
Likes
32
Share
@Hambone
Follow
So both the ladies look absolutely beautiful, a bit of a different structure on the two but almost the same size. Jack #1 really has filled out veg wise. Jack #2 seems to be the furthest into flowering of all the autos. The training looks perfect so far, Jack #1 May get a few fan leaves tucked but other than that we are probably gonna leave the ties and just keep making sure they are tight, not adding more. We have also introduced some bloom nutes and dropped the amount of veg nutes. We are probably gonna switch the bulb and got to 12/12 this week! See new pics and check back soon!
Likes
8
Share
Used real growers recharge for the first time as directed with RO water Day 13 first watering with RO water ph to 6.3
Likes
1
Share
@smonitus
Follow
germinated about a month ago and have grown less than i'd like, probably due to odd weather. had some colder periods and a summer that felt more like april in my area. Have only now begun to fertilize properly after some advice from my brother. This is my very first grow and i'd highly welcome some good tipps for how to better my growing.
Likes
5
Share
@Bak2Blk
Follow
The girls have grown so much and they already smell pretty good. I'm trying to decide if I should SCROG. I have a trellis net but it's just a net, not the boxy thing that I've seen others with. What do yall think, should I SCROG? GDP2 is in her 5th week. If she were the same age as GDP1 and BK, I'd flip them next week but I'll try waiting at least another couple of weeks to give her some time to grow a little more although she's catching up with the other 2 height. I'll be posting more throughout the week. 7/4/22: Defoliation... I know it's needed but they're my babies.... lololol 7/7/22: Look at my girls... they don't look like they've recently been defoliated. You can tell which ones are the Granddaddy Purples... they have a purple tint to them. The Bubba Kush is super green... 😍😘😍
Likes
2
Share
@temk4ru
Follow
Hey everyone, All the buds have been sent to my cozy basement for curing. I cure the dried plants in glass jars, burping them periodically. I maintain a temperature of around 20°C (68°F). This process takes anywhere from 2 to 6 months. I do all this to ensure a smooth and enjoyable experience later on. For consumption, I use my Xmax V3 Pro vaporizer. Cheers, see you all next time!
Likes
5
Share
@Ibgrowing
Follow
This is the last post with mid quality pictures and video since I will be going home soon 😀. It is a bit rainy back home so she has to be under a roof or inside a lot of the time. The nutes will be upped to 4ml/l for both the grow and the bloom nutes.
Processing
Likes
14
Share
Had some slight problems with the seed shells not popping off of the Cheese and Hulkberry seedlings. The fat banana looks good so far, some slight yellow coloring on outer edges of the fan leaves. Any suggestions from the pix above would be helpful to identify what kind of trauma the plants are going through and how to address it. ***** Regarding all pictures from 6/17/19, any help would be truly appreciated!!
Likes
5
Share
Had a few hiccups. Plants ended up developing a nitrogen toxicity from too much worm casting. I simply did a flush on them with water PH’d to 6.3 and allowed the soil to dry out
Likes
41
Share
Likes
29
Share
@Rounder
Follow
Hi guys, I just let them go, free growing taking care and adapting temperature the best I can. Nutrients I had a bit more and just the minimum dosage of Cal-Mag. I AM happy and they look too.
Likes
14
Share
ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
33
Share
@BudXs
Follow
Keepin it real through week 2. Off to a slow start, but no big deal, room will be pumping soon. In soilless mix until WELL established root mass and then into coco dutch buckets
Likes
1
Share
Algunas de 4 semanas otras de dos semanas y medias , todas contentas y bien alimentadas , pulverizado con delta 9 antes de pasar a floración , y primeras dosis de top bloom
Likes
9
Share
@Sudo17
Follow
10.15.23 - Both plants watered with 6.4 pH + 3ml CalMag + 10ml Bloom + 0.5 TSP RECHARGE. I'll be going up to 15ml/bloom from now on. I did a pretty aggressive "final" defoliation and pruning of lower bud sights. Plants are still very green and happy. :) 10.17.23 - Girls are getting thirsty. Soil was nearly bone dry - gonna have to start watering more frequently. Watered today @ 6.4pH + 3ml CalMag + 15ml Bloom + 0.75 TSP Recharge. Did some additional pruning and the leaves are still very green and praying 10.19.23 - Both watered with 6.3pH + 3ml CalMag + 15ml Bloom. No recharge this feed, in a time crunch. Officially done defoliating / pruning. Time to just feed and let them go from now on :) Day 19 flower 10.21.23 - Both watered with 6.35pH + 3ml CalMag + 15ml Bloom + 1 TSP RECHARGE. The early developing trichomes are already over the fan leaves and are wildly sticky. The new smells are incredible and can't wait for them to get stronger over the next few weeks 10.21.23 - UPDATE: I took my 'end of week 3' photos and noticed that a lot of the leaves are showing early signs of overfeeding of P/K or both. Will be carefully measuring input/output from here on to ensure a slight lowering of soil EC.
Likes
55
Share
☀️MARSHYDRO LED 😎 💯 🌲GOD’S GIFT🎁 FIRST ROW ON THE LEFT🌲
Processing
Likes
4
Share
@Tepsgrow
Follow
Finalizando el proceso solo con agua. Lavado de raíces y comienza la cosecha! Veremos que resultado nos da el esfuerzo y el cuidado de las FastBuds. Se agregaron unas Black Cream al proceso para aprovechar un vegetativo para lanzarlas al exterior.
Likes
27
Share
Another rough week. Thought I got aphids but now as I'm posting this after some more research it looks like I may actually have Neoseilulus fallacis. I only sprayed them down with water and got lady bugs. Been sick the last week as well so I cant really smell whats going on. Been having a hard time keeping the humidity below 60% at night but i finally found a budget dehumidifier that works okay