Likes
Comments
Share
very well, brother gardeners! these little girls go on their way more and more shiny and full of resin stay tuned for the harvest 🤟🤟🤟🤟🤟🤟🤟🤟
Likes
12
Share
Likes
1
Share
Likes
2
Share
@GrowerGaz
Follow
Day 56 Things are coming on nicely , buds are in boost mode , so gave them just organic PK booster from BAC and homemade Fermented fruit Juice , KNF FFJ ( banana x sugar )
Likes
14
Share
@Theia
Follow
I’ve spent the last six days recalibrating my grow room. It feels more like a lab now because I am doing a lot of experiments with different variables and this week I have learned an awful lot. After pushing the environment to its absolute breaking point, I had to balance what my eyes were seeing against raw data to identify exactly where the Traffic Jam was occurring. I got so excited at the ability to control proteins in a plant with light spectrum I did the usual thing I do I drove them to their limits. Maximum photons (and beyond) in an environment where the plant just works like a suction funnel with a VPD of 1.6 kPa. What I forgot is that in my organic setup, the bottleneck is the speed the microbial life can create immobile nutrients. Under any normal conditions, the Biotabs 'just add water' method is more than capable of keeping up, but I had to be that guy and push them with 950 µmol of whites. By the time my Emerson burst came on, I was hitting them with around 1150 µmol, not counting the drain from the UV-B! This, on ambient, is just too much to ask; the plants used up all the calcium available, and my microbial life was unable to keep up. This is good to know, as if I wish to grow at this rate later, I will know what I need to add to facilitate that. I'm still blown away by spectral steering and the way proteins in a plant cell work. Grows are not normally still this fun at this stage. ________________________________________ 1. The "950 µmol" Mistake & Conclusion • The Error: I was running the main rig at 950 µmol, but with 4 strips of DRFR engaged, I was hitting a total ePAR of 1150 µmol. • The Failure: This intensity, paired with an aggressive 1.6 kPa VPD, outran the plant's metabolic capacity under ambient conditions. • The Result: 'Pistil Frizzle' on the crown of the Triple Cheese—the delicate stigmas literally toasted under the radiant load. 2. The Calcium Benchmark & The "Traffic Jam" • The Action: I noticed rusty, necrotic spots scattered across the leaf surfaces. • The Conclusion: The plants weren't 'low' on Calcium; the Biotabs microbial factory couldn't mine it fast enough to keep up with the 1150 µmol demand. I have officially flagged an image as my 'Calcium Benchmark' to track this in future runs. 3. The attempt to fix • The Adjustment: I have lowered the light ceiling to 800 µmol (targeting a DLI of 31–36) and stabilized VPD between 1.2 and 1.3 kPa. • The Rationale: This matches the 'spending' of the plant to the 'income' of my organic microbes, allowing the nutrient highway to move smoothly without crashing at the leaf tips. 4. Emergency Recovery: Bactrex & Bio PK • The Action: To clear the jam, I introduced a targeted top-feed of Bactrex and Bio PK to the Cheese. • The Goal: Boosting the microbial workforce and providing a direct PK source to support the Week 5 bulk while the Calcium delivery recovers. 5. Rhizosphere & Water Management • New decontamination for my 10L res refills: 10 drops of ExoThrive Neutralise, 5 minutes of violent blending, and an 8-hour air stone session • The Goal: To strip all residual chlorine and chloramines from my London tap water to protect my Bactrex and Mycotrex factory workers. • Future Intent: Researching the Water2 Pod 2.0 with a Fluoride filter to automate this and ensure consistent, medical-grade hydration. 6. Pot Size & Substrate Logic • The Constraint: Bigger pots are not happening • The Solution: To compensate for the smaller volume, I will increase Bactrex frequency and explore high concentrations of Gypsum (20g per 10L) in future mixes to increase mineral density without changing the footprint. Summary: I pushed for maximum push and hit a wall. By respecting the biological limits of a just add water system, I’m moving toward Environmental Harmony where every photon is used rather than wasted as a stressor. Been a great week for learning. Thanks for passing. Grow well ..
Likes
27
Share
Hello growmies, OK so we definitely flowering now yay 😁. Today I will put them on flowering amounts of food. So we can really start to them start bulking up and becoming proper nugs on me tree. Lol. Will be back to update later when light is on! Peace out 🤟🌱🍀🌿 Nutrients given: per 20litre 💧 Flora grow 15ml Flora micro 32ml Flora bloom 48ml Ph down 6.0
Likes
19
Share
@creichs
Follow
Power Flower is now only an inch shorter than the Holy Punch 600W light is 9 inches away from plant (over the holy punch (Trying to give the two Power Flowers more room to grow))
Likes
26
Share
2024-08-31 They may have stopped to stretch, iam not sure, but i think so, you can see how the buds are forming, and they are already purple, thats fun leaves are changing color thats the tribute to the last 2 days where it was very hot and sunny, and tehy needed lots drinks and the big growth costed some leaves too. but anyways, not a Problem at all the Girl in the garden has more yellow leaves. BREEDER INFORMATION The cross of Frisian Dew with DucksFoot created Frisian Duck. It has such name due its characteristic leaf shape that looks like a duck's traces. The plant has a good growth in greenhouses and outdoors and also indoors. The strain is easy to grow and suit for begginers. It is harvested at the start of October outdoor and after 8 weeks of flowering indoor. The plant reaches 1.5 m indoor or 2.5 m in height outdoor. It demonstrates purple colors during a blooming and looks like a christmas tree. Frisian Duck develops compact buds. The strain has spicy aromas and tastes of pine, citrus and fresh wood.
Likes
9
Share
This week I fed Tea ☕️ that consisted of my own worm castings from the bin I made a few months back, molasses for the microbes , and a chicken manure product from Coop Poop. I can already see the difference, unless that’s my mind playing tricks on me, but I like to think that it is working! I think my own castings are the real catalyst to new growth; both now as well as in the future! I did check the trichomes on the plants that seem to be entering senescence (final stage of life). They seem to be still somewhat clear, so I will wait at least another week to harvest. As far as everything else, it has been an easy, uneventful, grow! ☮️💚
Likes
59
Share
@Coopmc
Follow
LemonWalker #1 chelated for week 11 might got 11-1/2 30g wet so about a 1/4 dry should press a nice gram of rosin for me to sample her let her dry 4-5 days shooting for 68-72% to press!! Flavor mellowing a bit starting to smell more like Key Lime!!
Likes
29
Share
Un altra settimana è passata senza problemi...grazie alla mia perseveranza nel curarla e debellare i ragnetti Rossi che bastardelli mi sono arrivati anche dentro al box... sicuramente c'è li ho portati io involontariamente quando sono andato a vedere delle piante di un amico che erano impregnate di ragnetti e ragnatele sui fiori....vabbè ora devo sbattermi un po' più ma non lascerò che mi rovinino la mia terapia 💪👍🙏🕉️🙏... Boom Shiva Shankar 🕉️ belle le mie coccinelle 🐞 che mi tengono pulita la mia terapia
Likes
34
Share
Day 49 Flip day! Just flipped them to 12/12 took loads of leaves off. Let's see if I've guessed the sex right then 😏 I think I've got 3 fems but people still tell me I want know until I've flipped 🤷‍♂️🏼 Update: Day 50 and day 1 of flower looking very happy will give a nice feed when soil dries out. Lights are now maxed out and on Day 51, day 2 of flower I'm sure all 3 are definitely fems will keep eye on them next few days 👀 Update again: Day 53, Day 4 of flower and they looking beautiful 😍
Likes
40
Share
great tent, sturdy and durable. opened and closed it about 500 times during this grow haha Edit: 3 ounce harvest
Likes
18
Share
@Yasyjlakh
Follow
Hello everyone, here is finishing the second week of flowering, she start to feel a good smell , especially swelling the buds in a crazy way , the colors mmmh I’m admiring them grow and I give fertilizers, in 2 weeks I think to defoliate them a bit
Likes
1
Share
@moe_mr_x
Follow
Tag 84 und die 9.Blütewoche ist angebrochen und ich kann schon Ernten. Die Trichome sind zu 20-30% Bernsteinfarbend und der Rest vollkommen milchig. Dieser Fruchtig süße Duft ist total schön. Es hat richtig Spaß gemacht mit dieser Sorte. Bin mal mit den neuen Vivi Packs gespannt, ob wirklich nach 10 Tagen die Blüten rauchfertig sind, den Rest hab ich Standard getrocknet.
Likes
93
Share
@Hou_Stone
Follow
👋I am happy of the growth of my 4 seedlings, I can't wait to see the buds appear. I continue to do defoliation, I make cuts in different places on each plant, I experiment ✂️ 🌱Genetics of this limited edition : Hawaiian Snow x Wedding Cake x Gelato 33 🌗Switching to flowering this week, I reduced the length of the day by 1 hour each day until reaching 12 hours night time / 12 hours daylight on the 33rd day!🌞 🌺On the 33rd day I apply a layer of organic nutrients mixed with a little soil that I add to the top of each pot. I added 35 grams of BioBloom to each of my pots🌺 ------------------------------------------------------------ 💧Watering I water all my pots the same day but with more or less water. Simply by lifting them; A light pot is a dry pot and will need more water, A heavy pot is a wet pot and will need less water. On average I water each pot with: Day 29 : 0.5 L Day 33 : 1 L with 0.8 grams of bio enhancer/L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 65-80%) Night : 14-17°C (Humidity : 75-85%) Outside the tent it is around 16°C with 70% humidity The humidity is a little too high, I hope it will drop a little 🙏 ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop I'm removing my heat mat this week. ------------------------------------------------------------ 📜Links : USA x Landrace LE Seeds : 👇 (Seeds of this Limited Edition is in restocking) https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/usa-and-landrace-limited-edition/ Mars Hydro : 5% off with my discount code "houstone5" 💪 https://www.mars-hydro.com/?acc=hou-stone 👨‍🚀My Instagram❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ Thanks for your visit😀💚
Likes
26
Share
9/18: New week...fed with Boomerang and Kangaroots 9/19: Applied Axiom harpin proteins and boomboom spray 9/20: Fed full strength TPS One...decent growth. The smaller one is less droopy now. 9/21: Tucked a few leaves and took some photos and a video. Looking good. Just a couple more days of 24/0... 9/22: Switched out the 560w of 5000k CCT lighting for 720w of 3000k CCT lighting and set the timer for 12/12. Decided against 13/11 with emerson effect...trying to save a few bucks on electricity. I'm keeping the lights at 30" from the tops for a day or two. 9/23: The girls loved their first night of sleep...so perky!
Likes
27
Share
There really is only 4 auto plants in there!! Lol 😆😆
Likes
10
Share
Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱