drying conditions are 18C° and 55% RH

una mas pequeña

Eccoci qui... Tutto va per il meglio, questa settimana non ho applicato stress alla piccola, ma ho guardato l'evoluzione che ha avuto dando i nutrienti. Ora ha un odore davvero intenso ed uno strat di resina pauroso, vediamo come si riprende dalla defogliazione che ho fatto settimana scorsa. Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️

Going strong. Tops are almost there, lowers have a little bit longer. Shooting for a day 90-95 harvest

Well well well....stone and glazed gems It promises to be an excellent smoke from these nuggets . We've had some jerky here too and I think I'll stay away from these fast flowering prototypes for a while

Plant is moving along nicely. Was a little slow at the start but Xpert Nutrients make it really easy to dial in the ph, over my 3 years of growing. I've only done soil. So, this is all new, my 1st grow was coco. And turned out well. All my hydro plants in this frankinstine setup (waiting on a tent i ordered 3 weeks ago) poxy FedEx. Pushing on the pheno has moved on gradually and picked up pace and growing healthy and full bodied. Thanks to my sponsors Kannabia, & Xpert nutrients. Thanks to all whom stop by. Sponsors gift to you DISCOUNT CODES Xpert nutrients 20% off code ggst Zamneisa 20% off code: ZAMMIGROW2024 Spiderfarmer.eu code:

Hopefully thats us at the good part now im thinking the next one wil be just water bt there showing no signs of stress or that so we will see

Aufeinmal schöne Farbe Entwicklung und ausgeprägte buds

📚🌱 Grow Course – Lollipopping & Light Management (MonsterMarker) 👹 When working on my MonsterMarker, I focus on the center of the plant 🌿. By carefully removing some of the big leaves in the middle ✂️🍃, the light can penetrate straight down to the bottom and through the canopy 🌞➡️🌱. This ensures that even the inner bud sites get proper light distribution and don’t get shaded out. Balanced light = stronger flowers and more consistent growth 🔥🌸. It’s all about finding the sweet spot: remove just enough for light, but keep enough leaves for energy reserves 💚. 👉 Stay tuned for more grow lessons & follow along for the results 🚀🌍.

Watering just the first day no other in the first week

GOOD WEEK 4 EVERYBODY 😎 !!!! Starting today Week 4, girls are pretty well since last week, the problem of development was because i had the Humidifier to closer this two girls and very high humidity. All the system controlled by --> GROLAB + modules: 3x irrigations a day 400ml total 4x day CO2 until 1000ppm, with light ON Nutrition: REMO Nutrients entire line Thank you all, have a Aswome WEEK. Regards, _GrF_

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We're back from vacation!! These did great on autopilot, of the 6 plants, these 2 are definitely my favorite.. a simple 4way LST when all tops come in level makes me happy 😻. they're still a little too dark/overfed so we're going super light for a while.. We raised the Solux350 a few inches as well, they're stretching fast... all other plants were showing early signs of cal-mag def so we adjusted strengths for everyone.. We have the Solux350 at 75% power, we'll keep it here until their flowering stretch is over and finish out at 100%...I'm really curious to see if resin production using 2835pro/Osram combo is comparable to what 301b/Osram does.. We have another 300watt using these diodes and that tent is a frost factory lmao..not too much else to report, it was nice not returning home to dead plants lol..thanks as always for dropping by and happy harvests everyone!! 🤘😼❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Salutations, fellow cultivators! It's time for the First Week Flower Report on our radiant Epsilon F1, and the journey of green glory continues. We've reached Week 5 from seed, and let me tell you, our botanical champion is stealing the spotlight. The transition to flowering has been nothing short of a magical metamorphosis. Our Epsilon F1, still in the prime of her youth, is taking on the dual role of vegging and flowering simultaneously. It's like she's performing a botanical juggling act, and she's doing it with flair and finesse. The bending saga continues as we guide her through this phase, ensuring she stays low and wide. It's a dance of cultivation, a choreography of growth that keeps our green queen in perfect harmony with the fabric pot. The benefits of this technique are unfolding like petals, promoting an even canopy and maximizing light exposure for a future harvest that promises to be truly extraordinary. As we step into the flowering phase, the environment remains a haven of stability. Room temperatures and humidity are unwavering, providing the optimal conditions for our Epsilon F1 to embark on this blooming adventure. Now, let's talk nutrients! The Aptus Holland super soil mix is still the backbone of our feeding regimen. Micromix Soil, Substrate Buffer Powder, All-in-One Pellet – it's the nutritional symphony that keeps our plant well-fed and flourishing. Mycor Mix, the microbial maestro, continues its support in the root zone, ensuring our Epsilon F1 has a thriving community of microorganisms by her side. In the spirit of continuity, we've introduced a touch of Foliar Applied Liquid Fertilizer, NutriSpray, into the routine. This foliar feast is like a gentle rain of nutrients, providing an extra layer of care during this crucial flowering phase. Our Epsilon F1 is not just a plant; she's a botanical champion, and she's proving it with every leaf and bud. Shout-outs to Royal Queen Seeds for the genetics that keep on giving, and a heartfelt salute to Aptus Holland for crafting nutrients that transform our grow space into a sanctuary of green excellence. Stay tuned, dear readers, as we witness the unfolding chapters of the Epsilon F1 saga. Happy growing, and may your gardens be forever green! As always thank you all for stopping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey

Because she's a herma I'm not going to do much about it. I took away all the balls and she is growing not so beautiful as I wished for.

First week setting up my DWC! Assembled the reservoir and cloner/seedling starter and figured out temperature control while waiting on the seeds to be delivered. June 8th, PM: Started germinating the seeds. Germinated in paper towel for 3 days. June 12, afternoon: Transplanted seedlings to the cloner to start seedling growth June: 16, morning: Transplanted to their final reservoir. June 16th (end of Week 1) is really the start of the grow, as it's when the seedlings finally made it into their res. This week was more a "Week 0".

the roots broke the plastic basket😱 Very strong genetic, very recommended👽

I defoliated them a lot and gave them some transition nutes to get them ready for the flip to flower in 7 days. ✂️💉 Oh they grow so fast.⏰😢😭

Solid week. Very fast growth despite topping. Amped up the light a little bit and will begin some LST soon to try and spread the plants horizontally. Updates as we go. -8/10/2021 - Did some LST, HST and a little cleanup of some lower crap that wasn't too promising.