Likes
4
Share
The Lemon Orange has a crazy mutation. She topped herself and the leaves are growing strange from the main stem. The Top gets Fluffy like it has topped itself multiple times. Unfortunately, during my absence, the ladies were under-watered and could’ve used a bit of nutrients as well. I’m optimistic they’ll bounce back and recover. I topped and defoliated them. Light is hitting the leaves with around 500 PPFD.
Likes
6
Share
@flitflitz
Follow
T'24.NH.OUT Tnt complex 2 veces/semana a razón de 2.5 ml/l Powerzyme 1 vez a la semana, 2 ml/l Supervit 1 vez/semana, a razón de una gota cada 5 litros Lo estipulado por hesi pero no, me he vuelto a colar y les he doblado la dosis de tnt un dia, se me va la olla, estare pendiente de ka reacción. La última vez no pasó nada...veremos RLC - ✅ . Nueva defoliación y corte de ramitas. Están bien hermosas. El clon totalmente enraizado y transplantado a su tiesto definitivo. PM - ✅ . Cada vez veo más claro que puede haber dos fenotipos distintos, uno con más distancia internodal que el otro que parece que desarrolla más las ramas laterales. No sé... Apreciación mía🤷🏻. A la más grandota (ventana) la hemos defoliado y podado, igual que las RLC está bien bonita. AP - ✅ . Es una bestia parda!! Ya pasa del metro. Me gusta que tiene unas hojas realmente grandes. AF - ✅ . Está muy bonita, buen color, brillo, apariencia en general. Seguimos!
Likes
2
Share
Likes
11
Share
18. Mai Pflanze wächst sehr schnell. Untere Triebe plus Blätter großzügig entfernt 20. Mai 4l Wasser, davon 1l mit 1ml Bio grow Pflanze zeigt erste Blüteanzeichen
Likes
13
Share
@NanoLeaf
Follow
Began LST on the taller plants. Things are running smooth and the plants are happy! Temps were running slightly hotter than normal. But nothing these resilient plants can’t handle. 2x Stunted seedlings are showing new growth and look like they are recovering just fine - excited to see how they will turn out.
Likes
8
Share
@Kirsten
Follow
31.12.24: I have been readjusting the LST pegs and wire daily. Sometimes, twice a day! (I know, too much time on my hands)! 😆 The plants have responded fantastically! I'm so glad I gave it a go. Some plants have been a bit too tall, and I snapped Do-sì-dos P3, pulling the stem down. Audibly snapped 😬I let it be, though. It seems to have healed mostly, in only 2 days. I have increased the lighting to 70%. They're getting watered a few times a week, with 1 litre of Dechlorinated water, containing the following nutrients and additives; 1ml of Biobizz Bio-Grow, 1ml Biobizz Top Max, 1ml of Biobizz Bloom, 2ml of cal-mag, 1g of Ecothrive Biosys. The plants are responding well to this concoction, so it's all good so far. The leaves are looking greener and are getting darker. Will be monitoring to continue readjusting the LST ties. Also, to monitor the increased lighting level, to make sure they can handle that yet. 1.1.25: Happy New Year! I have continued to readjust the LST wire and plant pegs. Several times a day. Coincidence would have it, I have a 6ft tropical aquarium which was time for cleaning! I always water my Acer tree in the front yard with this water, with beautiful results 😍 👌 🍁 I decided to try it out in my indoor garden. I'll post photos of before and after to see the difference, good or bad 😅 3.1.25: Plants are doing very well, except for PPP3 I'm quite disappointed in that one, as I feel like it's wasting a space. I guess I'll have to keep it, along with the Do-sì-dos that I snapped twice, which refuses to die 😅 I started to lightly defoliate, which is difficult because I always get carried away with it. I'm going to water again with the nutrients in description of this week. 4.1.25: Continuing to defoliate and adjust the LST pegs and wire. Watered today with 1ltr of dechlorinated water PH'd to 6.0. With the following nutrients;- 2ml Biobizz Bloom, 4ml Biobizz Bio-Grow, 2ml Cal-Mag, 2ml Ecothrive Flourish, 0.2 g/ltr of Ecothrive Biosys. I've increased the Nitrogen by adding double the amount of Biobizz Bio-Grow. I'm trying to keep them growing for as long as possible! I really want to keep the strength up and keep the leaves nice and lush green! 💚 Will update here with more photos and videos. Thanks for checking out my diary 🍃 ✌️
Likes
51
Share
@Tower84
Follow
🇩🇪 Cherry Limeade von Doja – Wochenkommentar Die Cherry Limeade von Doja steht weiterhin richtig gut da 🌱. Das Blätterdach bedeckt die 60 × 60 cm mittlerweile ziemlich ordentlich, auch wenn hier und da noch ein paar kleinere Lücken zu sehen sind 🌿. Insgesamt bin ich mit der Struktur aber sehr zufrieden. An Tag 20 habe ich dann den etwas schmerzhaften Teil erledigt ✂️. Ich habe die Pflanze gelollipoppt und alle Blätter und Blüten entfernt, die im Schatten lagen. Das entfernte Pflanzenmaterial habe ich direkt wieder als Mulch ins Beet gegeben ♻️. Ehrlich gesagt tut mir jede größere Entlaubung ein bisschen im Herzen weh, weil die Pflanze danach gefühlt nur noch halb so groß aussieht 😅. Aber diesmal gilt ganz klar Qualität vor Quantität 🎯. Ich möchte möglichst ausschließlich große Top Buds produzieren, die während der gesamten Blüte ausreichend Licht bekommen ☀️. Eine interessante Erkenntnis hatte ich diese Woche auch beim Tensiometer 💧. Ich musste feststellen, dass das Manometer offenbar etwas hängt. Durch leichtes Klopfen bewegt sich die Nadel wieder und zeigt anschließend einen anderen Wert an. Rückblickend hatte ich wahrscheinlich gar keine zu niedrige Saugspannung / hohe Bodenfeuchtigkeit – die Pflanze hat sich schließlich optimal entwickelt 🌱. Das Problem lag vielmehr darin, dass das Tensiometer teilweise falsche Werte angezeigt hat. Zum Glück habe ich mich zusätzlich immer auf die Fingerprobe und vor allem auf die Entwicklung der Pflanze verlassen 👆🌿. Dadurch ist trotz der fehlerhaften Anzeige alles gut gegangen. Ich habe das Tensiometer nun herausgezogen und komplett neu mit Wasser befüllt 💦. Allerdings muss ich das Manometer weiterhin leicht anklopfen, damit sich die Nadel zuverlässig bewegt. Mein Ziel bleibt bei etwa 120 mbar Saugspannung während der Blüte. Heute gab es außerdem 3,5 Liter Almicanna Flower Komposttee 🌸. Der Tee wurde zuvor insgesamt 48 Stunden unter Belüftung gebraut und durfte anschließend ins Beet 🫧🌱. Jetzt heißt es erst einmal zurücklehnen und der Cherry Limeade beim Aufbau ihrer Buds zuschauen 😎. Nachdem sie sich in den nächsten Tagen von der Entlaubung erholt hat, werde ich die Lichtintensität schrittweise auf 1000 PPFD erhöhen ☀️. Jetzt beginnt für mich der wirklich spannende Teil der Blüte – weniger Training, mehr beobachten und hoffentlich viele schöne, dicke Top Buds 💚🌸. 📊 Parameter der letzten Woche: 💡 Licht: 900 PPFD / DLI 39 (12/12, Stufe 6, 40 cm Abstand) 🌡️ Temperatur: 27 °C 💧 Luftfeuchtigkeit: 66 % 📈 VPD: 1,2 kPa 🌿 CO₂: Ø 550 ppm 💦 Bodenfeuchtigkeit: 120 mbar 🇬🇧 Cherry Limeade from Doja – Weekly Update The Cherry Limeade by Doja is looking really good 🌱. The canopy now covers most of the 60 × 60 cm tent quite nicely, although there are still a few small gaps here and there 🌿. Overall, I’m very happy with the structure. On day 20, I had to do the slightly painful part ✂️. I lollipopped the plant and removed all leaves and flowers that were sitting in the shade. Instead of throwing the plant material away, I added it straight back to the bed as mulch ♻️. I have to admit that heavy defoliation always hurts a little because the plant suddenly looks like it has lost half of its mass 😅. But this time I’m clearly going for quality over quantity 🎯. My goal is to produce mainly top buds that receive plenty of direct light throughout flowering ☀️. I also discovered something interesting with the tensiometer this week 💧. The pressure gauge seems to be sticking slightly. A gentle tap on the gauge makes the needle move again and reveals a different reading. Looking back, I probably didn’t have excessively high soil moisture at all – the plant has been developing perfectly 🌱. The problem was simply that the tensiometer was occasionally giving me inaccurate readings. Fortunately, I also relied on the finger test and, most importantly, on how the plant itself was developing 👆🌿. Because of that, everything worked out despite the faulty readings. I have now removed the tensiometer and refilled it completely with water 💦. However, I still need to gently tap the gauge to get the needle moving reliably. My target remains around 120 mbar soil suction tension throughout flowering. Today I also gave the plant 3.5 liters of Almicanna Flower Compost Tea 🌸. The tea had been actively aerated and brewed for a full 48 hours before being applied 🫧🌱. Now it’s time to sit back and watch the Cherry Limeade build those buds 😎. Once she has recovered from the defoliation over the next few days, I’ll gradually increase the light intensity to 1000 PPFD ☀️. The really exciting part of flowering starts now – less training, more observation, and hopefully lots of beautiful, chunky top buds 💚🌸. 📊 Parameters from last week: 💡 Light: 900 PPFD / DLI 39 (12/12, Level 6, 40 cm distance) 🌡️ Temperature: 27 °C 💧 Humidity: 66% 📈 VPD: 1.2 kPa 🌿 CO₂: Avg. 550 ppm 💦 Soil moisture: 120 mbar
Likes
132
Share
@rhodes68
Follow
12/7 Week 4 still in strong veg no flowering signs. Reduced feed to 600ppm and upped amount to 0.5 gal to control runoff PPM/EC as it was just too high at 1400-1700 ppm and seeing some tiny white tips on new grow growth. Still on all Grow will add some bloom when I see some hairs multiplying. Increase nuets when runoff checks out ok Ended ponytailing and just doing some leaf tucking as always After some thought and a bit of reading I decided to do this as a root drench and fertilized flush to remove all salts from the pot. @0.5 gal ea 5.8PH CT Grow AB / Kangaroots /Fish Sh!t with @50% runoff at 900ppm (unadjusted 700ppm adjusted) in / and 985ppm out. See how things look in 24 hours. 12/11 Hooked up a reptile heater (60w) in a reflector directed at plant area on 24/7 to level out heat in lights off and give them more IR. They are really taking to it 12/12 Feed adjusted to 850 watching for white tips
Likes
7
Share
@PB888
Follow
All plants very healthy and growing well. I have included some pictures of HST and tucking. I keep it under the screen as much as possible . If I can not easily tuck it under I carefully use Kyle Kushman's technique for partially braking the inside cambium layer with out the damage to the outside. Carefully then twist slightly and the branch will lay down. By this ninth week, all the plants except the GTH x P reached the height of the wire, and at that time I started tucking the new growth back under and kept it there for the most part of the Veg stage. I also fertilized with for the second time with Soils Solution Top Veg
Likes
56
Share
@nonick123
Follow
Día 50 (09/12) Busy time Solo riego! Día 51 (10/12) CBD Auto 20:1 #1 no para de crecer! ¿Parará el stretch? 💥 OG Kush Auto avanzan las manchas en las hojas... ¿Será deficiencia o carencia? Día 52 (11/12) CBD Auto 20:1 #1 está demandado más agua. Subo a 1500 ml / día de H2O RO CBD Auto #2 está ralentizando el consumo de agua (el top se muestra húmedo). ¿Estará entrando en la fase final de floración?. Según FastBuds le quedan 11 a 18 días! OG Kush Auto también demanda más agua! Subo a 1250 ml / día de H2O RO Día 53 (12/12) CBD Auto 20:1 #1 es increíble como no para de estirarse y de formar nudos y hojas! Parece una Sativa pura que nunca para de crecer en floración! CBD Auto #2 empieza a mostrar algunas hojas con senescencia. Se acerca la cosecha! LSD-25 Auto está haciendo unos cogollos densos y duros como rocas 😍💥 No está tampoco lejos de la cosecha! 💥💨😁 OG Kush Auto produciendo una resina brutal en las hojas de azúcar! 😍 Día 54 (13/12) CBD Auto 20:1 #1 no para el stretch. Le hago una poda de bajos y ligera defoliación OG Kush Auto está generando una cantidad de tricomas increíble. Además huele a Kush deliciosamente 😍😍😍 Día 55 (14/12) CBD Auto 20:1 #1 para un poco el consumo de agua en ¿Fin del stretch? Casi toca la lámpara de nuevo! CBD Auto 20:1 #2 empieza a mostrar la senescencia. Reviso los tricomas con muchos turbios y alguno transparente. ¿Estará en una semana más aproximadamente? 🤔 Día 56 (15/12) OG Kush Auto ha bajado un poco el consumo de agua La cantidad de tricomas que está haciendo es insana e increíble. Y como huele! 😍 LSD-25 Auto muestra los tricomas trasparentes y algunos turbios. ¿Quizás dos semanas para la cosecha? 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/
Likes
15
Share
@MrJones
Follow
MrJones Ztrawberriez Auto 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 💧 Feeding - Using Gaia Green Grow / Bloom and Compost Teas 🍃Training / LST-Defoliation-Topping TBA 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between products each month for Integrated Pest 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 ▶️Saturday 11.04.23 - One of these girls is looking good, but the other is a bit small, not sure I am going to keep it, this is the start of week 3, and going to set the light cycle to 18/6 pretty straightforward. 🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 ▶️Bud Description Ztrawberriez Auto produces long and fat buds with a beautiful light green shade with oftentimes purplish hues and a thick layer of resin that starts at the top of the flowers and continues all the way to the tip of the sugar leaves. It’s the typical bud structure you would expect from hybrid varieties topped with an explosion of fruity terps that’ll hit you in the face with a blend of creamy, fruity, and sweet aromas as soon as you break the buds open. Definitely a must for terp heads and extractors looking for exaggerated flavors and aromas 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 ▶️SOIL MIX 40% ProMix HP 40% Coco Coir 70/30 15% Worm Castings 05% Malibu Compost 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓
Likes
13
Share
So as you can see I now have four flowering which I guess were the autos and I have one gelato that is still vegging and is doing damn good. There are two that have lighter color leaves, I’m trying to focus on on these and see if I can get better production. As for the tall GG in the back, leaves are waxy and have resin production starting. A lot better, overall I’m learning more and more every week! Hope everyone is enjoying my grow and stick around, ask questions. Happy New Year!
Likes
23
Share
This week went very well! One will be getting cut an hung to dry while the rest finish up with one more week of flush ! These ladies are smelling so lovely I hope you all enjoy! Stay tuned for next week! Cheers 😤💨💨💨💨💨
Likes
19
Share
Likes
1
Share
@undermink
Follow
The little plant have recovered pretty well as far as I can tell... They still look a bit wrecked but this is due what they have lived through I think... Hope they have a better time ahead :) UPDATE: one of the plants seems to have fallen (eg autobended herself) to the ground but is still looking good to me... I just let her be and see what happens :)
Likes
2
Share
@Kardo
Follow
Ganz schön viele trichome sie wächst super