Blueberry Lime Kush AD

📅 Week 1 💡 LED 50% Full Spectrum 01/17 📌 - She sprouted by the morning and she's looking beautiful 🤩 01/18 📌 - 4cm 01/19 📌 - 6cm 01/20 📌 - 7cm 01/21 📌 - 7,5 cm 01/22 📌 - 8 cm 01/23 📌 - A new pair of leaves growing 🍃

Red gorilla auto/left back-7 weeks Red gorilla auto/right back-6 weeks Purple punch og/ front-4 weeks

Esta semana he añadido un led Spider Farmer sf1000 💡 a ver que tal les sienta.

Sprayed with Kelp to promote lateral growth.

25 and 28 days from planting. A couple of days before, I started cutting off the large leaves. Today I started doing LST. Perhaps I was a little hasty with this, but we'll see. The temperature problem has been resolved. Watering is carried out every 3 days. For the entire volume of the pot.

D78/F34 - 17/06/23 - I changed light schedule hoping she's going better. (6 only red ligh and 7 red-white) D79/F35 - 18/06/23 - New lights schedule is running D80/F36 - 19/06/23 - Added water and integrators EC 1.0 and pH 6.4 D81/F37 - 20/06/23 - Nothing to report D82/F38 - 21/06/23 - Added water and nutes EC 1.0 and pH 5.7 D83/F39 - 22/06/23 - Temp is too high for both water and environment. I see signals of suffering on the flowers (foxtailing) D84/F40 - 23/06/23 - I'm trying to keep the Tremp under control but isn't easy. To lowering water temp (that now is about 26 °C) I'm adding some ice to the water

08/10/22 watered with Recharge

Method Steps 1. Get all materials set out and prepared 2. Pre-Freeze all tools 3. Add Bubble Hash bags 4. Mix ice + water into a 5g bucket 5. Mix the water and add fresh frozen trim 6. Mix for 15m 7. Let mixture rest for 10m 8. Filter each Hash bag out 9. Begin collecting hash at 120 microns 10. Scoop hash onto a 25 micron sheet + press water out

SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.

Hey growmies! ✌️ Time for another update on the Frosty Tooth growing in the Minigrow One. We’re currently at day 19 since switching to the bloom phase, and the first signs of bud development are starting to show. The buds are still small, but it’s a promising start! The plant is staying incredibly compact, but the leaves are growing in abundance. To give her some breathing space, I had to do two rounds of heavy defoliation. The difference is already noticeable—she looks much tidier and healthier now. 🌱 I’m really curious to see how much she’ll stretch as the buds continue to develop. I’ve heard that the buds can grow so tall they almost touch the protective glass below the grow light without getting burned. Let’s put that to the test and see how far she can go! 😅

Day 43/Flower Day 15 - Stretch, stretch and more stretch. Literally have all my headspace taken up and that’s using flat LED Bars! It’s not for want of light, these things HAVE to be getting a DLI over 45 now if not near 50 (I need to do a test)!!! Defs going to invest in 2 Royal Blue LED Bars for next grow. As soon as I bend over/tie down one set of big pushers, another pair start up that were not being shaded/shadowed by the previous set. Worried too with the stretch being as severe, the yield will suffer! As noted in comments, will be venting the building the grow tent is in better very soon but when I can get that done is another thing!!! Looks like I am going to have to pull my extraction out of the tent and run a blow through the carbon filter and get some more ratchet hangers to give me an extra 9"!!! Has to be Heat/Humidity and then the feed from the lights giving them what they need. Luckily, I am due to be receiving a 6" AC Infinity Setup tomorrow so may be the way to set it up just for the last 8 weeks of the grow. Also had 2 brand new RAM 7" Oscillating fans pack up within a few hours of each other...not 4 weeks old and they're done! The Sweet Cherry Pie defs not setting buds as quick as the Red-Hot Cookies...they look a few days to a week behind. This also probably means the last of growing different strains in the same tent! I don't have the space/means to set up a drying tent and need to use the grow space for that so need them to finish the same time. Both these are supposed to be a same week finisher but with the slower budset, I don't know - I could over-ripen the RHC or take the SCP when a bit under. Basically, that's it though. Nothing more to report other than things I have to engineer to get around! From the looks of it, I'll have no room to get my UVB tube in when the time comes but, dunno...we'll see. Have upped the Bloom Nutes now to be higher than the base to fuel the initial flower set. Have a bit of lower leaf fall off from lack of light/plants using the reserves and probs going to have to do a bit of a defoliate by the end of the week to settle humidity and have them top buds concentrated on. Apart from that, Happy Growing all!!! 💪

The one plant that has always been under the cobbs is a couple of weeks ahead. They are all fattening up and the smell is great. Humidity in the tent has dropped, this is due to the outside weather changing and running a 6" fan 24/7. I may start the flush on the one plant, will decide in a few days. Cheers

😲😲😲

Week three flower

Past closet grow beautiful