Semaine 2 – Croissance Mother Gorilla On continue sur une bonne lancée avec cette deuxième semaine de croissance ! La plante est bien vigoureuse, elle a clairement pris du volume depuis la semaine dernière. J’estime qu’elle a quasiment doublé de taille, on est maintenant aux alentours de 15-16 cm. C’est un bon signe, elle se plaît dans son environnement et ça se voit aussi au niveau des racines : elles ont bien évolué en quelques jours, bien blanches et en pleine forme. Côté constantes, on reste sur 18h de lumière par jour. La température oscille entre 22-23°C en journée et descend à 18°C la nuit, donc l’amplitude reste raisonnable. Niveau pH, il a un peu bougé et est monté à 6, mais rien d’inquiétant. Je vais surveiller s’il continue de grimper, et si besoin, je le redescendrai à 5,8. Pour l’humidité, j’ai baissé légèrement à 70 %, et je prévois de continuer dans cette direction la semaine prochaine pour descendre entre 60 et 65 %. L’objectif est de garder un VPD entre 0,4 et 0,8 max, histoire de rester dans une bonne fourchette pour la croissance. Aucune modification sur la plante pour l’instant : je ne l’ai pas encore topée, je préfère lui laisser encore une semaine d’acclimatation avant de commencer le travail de structure. Même chose pour la solution nutritive, je suis toujours sur la même que la semaine dernière. Pour l’instant, pas de signe de carence ou de besoin particulier, donc je continue comme ça. En résumé, tout roule ! La plante est en bonne santé, ses feuilles sont bien larges, et son système racinaire est top. On va continuer sur cette lancée et voir comment elle évolue la semaine prochaine ! 🇺🇸Week 2🇺🇸 – Mother Gorilla Growth We’re still on track with this second week of growth! The plant is looking strong and has clearly bulked up since last week. I’d say it has almost doubled in size, now standing around 15-16 cm. That’s a great sign—it’s thriving in its environment, and you can see it in the roots too. They’ve developed really well over the past few days, nice and white, just the way we want them. As for the conditions, we’re sticking to 18 hours of light per day. Temperature stays between 22-23°C during the day and drops to 18°C at night, which is a good range. The pH has fluctuated a bit, sitting at 6 now, but nothing concerning. I’ll keep an eye on it—if it keeps rising, I’ll adjust it back down to 5.8. Humidity has been slightly lowered to 70%, and I plan to keep decreasing it next week to around 60-65%. My goal is to maintain a VPD between 0.4 and 0.8 max to keep things ideal for growth. No plant training yet—I haven’t topped it, as I want to give it another week to settle in before I start shaping it. Same goes for the nutrient solution—I’m still using the same mix from last week. The plant isn’t showing any deficiencies or issues, so I’m keeping things steady. Overall, everything’s looking great! The plant is healthy, leaves are nice and wide, and the roots are thriving. Let’s keep this momentum going and see how things progress next week! 🤘😎🤘

This one's going faster then thought, it's an autoflower on 12/12 from seed, so the yield isnt expected to be really high. The seed on 18 hours schedule would finish in around 6,5-7 weeks I've heard that it's going to be the same on a 12/12 schedule 😀 ofcourse that will lower yield too. But.. for buds in the fourth week since the first signs of flowering hairs all looks good, feeding is on the max with an EC of 2.38 ! Light is 100w chinese cob on 220v on the sides 2x 50W - 12V, both powered at around 35 watts making 170 watts together ( to compensate the short time schedule of 12/12) I'm kinda new to autoflowers, I heard about small yield, I'm aiming towards 30g/plant dry bud, I'll be happy with a wet weight of 200grams for the whole plant.

Week 6 sticky wasabi. plants growing and bounced back from LST they are growing fast with no problem, a few of them are growing with tight nod spacing and they still loving the 24 housrs of light under 580wats led lighting, THIS FEED they av took 40l between the 14 of them,.. @growerchoice @SHOGUN COCO A 4ml/L 160ml @SHOGUN COCO B 4ml/L. 160ml @SHOGUN ACTIVE BOOST 2ml/L. 40ml @SHOGUN CAL MAG 1ml/L 20ml @SHOGUN ZENZYM 2.5ml/L. 100ml

SWISS DREAM ROSE 🌹 CBD AUTO KANNABIA SEEDS Week #4 Overall June 16th-23rd Week #1 Flower This week she started to flower good thing she stretched to about 13 inches hopefully she'll stretch more to make room for buds. No issues this week. Stay Growing!! Kannabia.com SWISS DREAM ROSE 🌹 CBD AUTO

Almost time I should of trained her and for sure if topped her will give it a week or so n see again

my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G

Iv started my 9 beans out in jiffy pallets on the 29th of march so we are 2 days in and they are already starting to pop out! I have 1 of each making way through the top layer of Coco in the pallet.

23.08.24: I've done considerable defoliation. Also, FBP1 and FBP3 have grown all over the place. The stems are also relatively weaker as they've grown so much. (Photos above). Being as the plants were looking a bit delicate, I added some string and tied the side branches lightly to keep them a bit more compact. Additionally, FBP2 has a considerable amount of buds on the main cola. So I've added a plant stake, and I just tied string around the stake and the main stalk. The humidity has been able to stay under 53%. That's with 3 dehumidifiers. So I'm pretty sure that's about as good as it will probably be. I've had to lower the watering frequency on FBP3, as I overwatered only this plant. and also added too much Nitrogen in. As a result all the leaves are looking droopy. I'm really not sure how this will pan out, as they all still look like they're weeks away from harvest. Anyway, I'll update throughout the week. 25.8.24: I was tending to the garden a majority of the day, and realised that a branch had broken on FBP2. I acted quickly to insert plant stakes, to provide the heavily laden branches additional support. See photos above. The branch was bent or snapped, but still in one piece. I used duct tape to carefully put it back together. Before making a stake for it. Silica, apparently wasn't quite enough to get the FBP2 through the whole way. The flowers are very heavy and dense. I have also given the plants water yesterday with concentrations of the following nutrients, per plant. ● 9ltr of dechlorinated tap water with 6ml of cal-mag, 3ml of Ecothrive Flourish, 6ml of Xpert Nutrients Bloom Booster. I have also added cinnamon top dress after watering, as I have noticed some fungus gnats. I checked the trichomes through one of my loupes yesterday too, and nearly all are still glass like in appearance, with some cloudy here and there. I'm definitely going to have some time left on these girls. I did check the PH if my soil on all plants as I was concerned about nutrient lock out on FBP3. All pots tested out at 7.0 Ph exactly, before and after watering. Thanks for reading my diary 😊

Beide Z-ups haben sich toll entwickelt, sowohl von der Reife als auch in der Masse. Das war die letzte Woche mit Dünger und nächste Woche gibt es gibt es dann nur noch flawless Finish, vielleicht auch noch zwei Wochen.

Pheno 1 dark purple : On the nose, it reveals a sharp burst of fresh lemon, layered with a powerful eucalyptus aroma that’s both invigorating and camphorous. A truly refreshing and vibrant terpene profile😈🍋 Pheno 2 Green : this one is a real surprise! If I close my eyes, it’s like Nutella! It’s as if you’ve just walked into a kitchen where hazelnuts have been freshly roasted 🤤🌰 Pheno 3 light purple : It’s a mix of the first two with a hint of amarena cherry at the end🍒🍧

27 days into flowering now. These girls are still stretching, hopefully there done now! I was playing with my light rail mover a bit and experimenting with timings and I think this contributed to it. They definitely got away a bit on me. Lol No biggy, just had to weave a couple more branches through the top screen, canopy is not quite as even as I would have liked, but should still be a good harvest. My HPS light penetrates down to the second screen fairly well in most places I think though. I seem to have 2 phenotypes, 3 are stretching up and skinnier leaves, but 1 is staying lower and has big fat leaves. Dropped my nutrients a bit last week and they seem to responding better. Buds are developing nicely and are ramping up daily. Still running my light at 750w, debating on turning my light up to the full 1000w to get more light out to the side buds but I’m already exceeding 75000 lux on the canopy directly under the light. Not sure how this works with my movers, but I think I’m still gonna play it safe for this next week. Happy growing everyone! Cheers💨

Hello my friends 👨‍🌾👩‍🌾, Let's go for a new run! First of all a big thank to Mars Hydro and @Coco_Pan for sponsoring the TS1000 ❤️❤️, as well as Sweet seeds for donating the seeds ❤️❤️ in a contest. I was able to get a glimpse of the TS1000 for a good part of the flowering of my auto mimosa, I'm really not disappointed with the result, this time we're going to start from the seed. First Sweet seeds photo, first seeding with the TS1000. The seeds germinated very quickly, opened in less than 24h👍👍, I put the seeds in plugs when the root measured 1/2 cm (48h), the same day 2 had already come out. Since it's my first seeding with the TS1000, I put it on the minimum, and created a little shade, 2 have a lot of stretch 😅🤦‍♂️, So, I put them in direct light. #3 came out of the ground after 5 days. I wrapped the roots around the plug then put the plugs in 2l pots, Plagron Light mix + rqs pellets. Today all 3 are in pots, About #4, bad news, I probably broke the germ during the translation, it is no longer connected to the seed 😪. I moisten the soil twice a day with my water + rhizo spray, maintain a temperature of 26°C. Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Gorilla Girl F1 fast version https://sweetseeds.es/en/photoperiod-dependent-seeds/3065-gorilla-girl-f1-fast-version.html

We had rain morning Day 1 and the previous night. Early morning Day 2, around 2-3 a.m., we had thunderstorms with strong winds and heavy rain. This was followed by sunshine that afternoon. Despite the 5% rain forecast for day 3, we had a thunderstorm. It produced heavy rain and strong winds. For about a hour in the morning Day 3 and that evening showers. Day 4 was all day sunshine with a lite breeze. That was excellent turn of weather to dry out the soaked soil. Day 5, 6, and 7 we had sunshine and a breeze. I added 2.5 ml of ferrous sulfate per gallon of soil on day 1. I added a second dose of 2.5ml ferrous sulfate per gallon of soil top dressed on day 5 for a total of 5ml/gallon of soil, top dressed for the week. I added 1.3 ml/gallon of soil(10ml) blood meal, top dressing on day 5. I watered on day 6 and 7. The ferrous sulfate really began to work on day 6. On day 7 they had a healthy even green color and are rdy for the stretch to begin flower. These plants surviving and thriving through the challenging spring weather and grower proves how resilient these fastbuds genetics are.

***I’m not sure why but it’s only letting me put 100 growing plants, but I actually harvested 180 plants in three separate rooms of about 300 sqfeet almost each, running in at 350 g per plant *** Given her being my first grow, I don’t really have anything to compare to but me and my plants have gone through a lot this year. Definitely going to need filters with this one, for the strong scent. 10 out of 10 would recommend this strain. I tried some fish fertilizer through some of the early growth and everytime I did, I would notice the plants beginning to burn so I completely stopped it, I learned organic is the best way to go if I’ll ever be using fertilizer again. This is the only way I would’ve learned it through experience! I didn’t think I can make it all the way through with my harvest, but ever since I got on Growdiaries everybody has helped me tremendously with every question I had, without the site my whole to harvest would’ve went to shit along time ago. Haha I really can’t thank my Growmies here enough for all their support. Every time I thought about giving up I would have uplifting comments assuring me my plants we’re doing fine. A message to all nee growers. Don’t be afraid of failure. Ask questions. I don’t know when my next grow will be but when, or if I decide to grow again, I’ll definitely document it on the best possible weed growing platform. Cheers friends!

1.5oz dry . Didn’t measure wet

Bene bene.💪👍

7ft tall doing high stress training to bend down. Tent is maxed. All under control day21 frosty oh my!

She sure is turning into a pretty plant. She’s looking good!

I've turned the light up to 35000 lux. Up'd the bloom to 1.5ml/l. There still stretching and could do with more room but there doing well 😎